Büchi Buchi TO-51 Glass Oven Drying Glasofen 40...300°C 100-250 mL

Polyscience MX20R-30-A11B 20L Refrigerated Circulator, MX (-30 to 135C), 120V, 60Hz3D Visualization  (more)of the Polyscience CirculatorThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. PolyScience Circulating Bath with MX Temperature Controller. It is intended for the precise temperature control of suitable liquids in a reservoir. Extremely easy to use and maintain, it combines design innovation with highly intuitive operation to deliver convenient and versatile liquid temperature control for a wide range of applications. Features Large, universal icon and English display On-screen prompts Single-point calibration capability Click Here to View Product Video INCLUDED: The Polyscience MX20R-30-A11B 20L Refrigerated Circulator, -30°C to 135°C, 915W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

RCT basic ETS-D5 Solution Speed Range 50 to 1,500 rpm Temperature Setting Range 0 - 310 °C Setting a (more)ccuracy speed 10 rpm Features - Combines RCT basic magnetic stirrer with ETS-D5 contact thermometer. - Safety circuit limits max. temp. independently of set point. - Heating function switches off if temp. limit exceeded. - Set safety temp. of heating plate remains available. - Hotplate temp. displayed on RCT. - Contact thermometer display can be placed at eye level. The RCT basic ETS-D5 Solution consists of the RCT basic magnetic stirrer and the ETS-D5 electronic contact thermometer making experiments and reactions even safer. Improved temperature controlBy combining the two devices, the internal safety circuit, which is independent of the RCT basic software, can be addressed directly by the contact thermometer. For this purpose, the maximum permissible temperature in the medium is limited independently of the set point temperature. If this value is exceeded, the heating function of the magnetic stirrer switches off via the internal safety circuit - until the device is restarted. At the same time, the stirring function is maintained to avoid boiling distortions. The set safety temperature of the heating plate also remains available. The set temperature limitation of the ETS-D5 and the safety temperature of the hotplate are OR-linked. This means that every potential error leads to the heating being switched off. In addition, the temperature of the heating plate can be set independently of the medium. In this way, you actively influence the heating times. Improved displayWith the ETS-D5, you also enhance the display of your magnetic stirrer. You can see the set and actual value of the medium temperature at a glance with a resolution of 0.1 K on the contact thermometer. The setting accuracy is also refined from 1 K to 0.1 K in this combination. The current hotplate temperature is also displayed on the RCT. Another plus: The display of the contact thermometer can be placed at eye level. This makes it directly visible where the temperature is measured and controlled. In addition to the magnetic stirrer and contact thermometer, the complete solution also includes all the necessary mounting elements.INCLUDED: The RCT basic ETS-D5 Solution includes: - H 16 V Support rod - H 44 Boss head clamp - Screw driver - ETS-D5 - PT 1000.60 Temperature sensor, stainless steel - H 38 Holding rod - RCT basic - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Multisizer 3 Coulter Counter, with Aperture 70 µm and 100 µm. Complete with waste and Isoton plastic (more) reservoir left, original Beckman map and 12 chapter manual. No software available, but can be requested from Beckman.

A hardness tester according to the principle of “Brinell”, type Pessimetro S2, in combination with a (more) large surface table. The hardness of materials with a thickness of max. 10 mm. can be tested by means of 5 different (in size) pressure bodies with a fine adjustment of 100 gr – 20 kg. force can be applied. The size of the impression is measured digitally using a Mitutoyo 543-250B (in 0.001 mm.). The hardness of the material is then calculated in (kgf) and the area of the indentation. Compression bodies: 1.5 mm. / 11 mm. / 30 mm. Dimensions table (WxHxD): 40 x 8 x 55 cm. Weight: 40 kg.

Ohaus SHEX1619DG Extreme ShakerThe OhausSHEX1619DG Extreme Environment Orbital Shaker is designed fo (more)r a wide range ofapplications including cell cultures that require CO2 and humidity for optimalcell growth. The microprocessor control provides consistent uniform shakingwhile safely ramping to the set speed. Ideal forapplications that require CO2 and humidity for optimal cell growth, our ExtremeEnvironment Shakers are designed for use in extreme environments such as CO2incubators. A remote controller (that magnetically attaches to the outside ofmost incubators) allows for external control of settings, and the shaker baseis placed inside of the incubator. Microprocessor control ensures consistentshaking while safely ramping to the set speed. The exclusiveAccu-Drive shaking system utilizes dual-speed sensors to continuously monitorand maintain shaking speed - delivering exceptional speed control, accuracy anddurability. The externalcontrol module of the SHEX1619DG allows for settings to be easily viewed orchanged from outside of the incubator. The remote controller magnetically attachesto most incubators or can sit on a lab bench. Touchpadcontrols with independent LEDs for speed/time allow operator to view allsettings at once. Timer displays elapsed time or when programmed to a set time,will turn off when time reaches zeroClick Here to View Product Video INCLUDED: The Ohaus SHEX1619DG Extreme Shaker includes: - Non-Skid Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty Ohaus SHEX1619DG Extreme Shaker Specifications Speed Range15 to 500 rpmSpeed Accuracyabove 100 rpm ± 1% of set speed; below 100 rpm ± 1 rpmTimer1 second to 160 hoursOrbit0.75" (19 mm)Maximum Weight Capacity35 lbs (16 kg)Tray MaterialAluminumTray Dimensions (L x W)11 x 13" (27.9 x 33 cm)Overall Dimensions (L x W x H)Shaker: 11.6 x 14.0 x 5.9" (29.4 x 35.5 x 14.9 cm)Remote: 5.5 x 14.0 x 4.4" (15.0 x 35.6 x 11.2 cm)Ship Weight49 lbs (22.2 kg)ControlDigitalPower120V, 0.5A, 50/60 HzPower Consumption30 WSafety CertificationTUVCalibrationSpeed calibrationDrive SystemBrushless DC Motor;Triple EccentricTray ConstructionAluminum