BTX AgilePulse Max Large Volume Transfection System

Manufacturer: WATERS Model: ACQUITY UPLC Online SPE Manager (OSM) P/N: 186015012IVD S/N: J120SM002Z  (more)Description: WATERS ACQUITY UPLC Online SPE Manager OSM is a component necessary for Sample Preparation and Analysis. Due to Online SPE Manager OSM UPLC Mode is possible. Online SPE can be bypassed to allow UPLC operations. Waters the first UPLC-pressure enabled, analytical scale on-line SPE system, the time required for preparation and analysis, once measured in hours, has been reduced to minutes. This technology provides advanced data management capabilities to help improve analitical workflow. Can be used with a range of Waters high-performance optical and mass detectors - your laboratory will have the flexibility to analyze a wide variety of chemical compounds.  Key benefits for laboratory operations: - Quality - Automated sample processing ensures reproducible results by eliminating manual variability.- Throughput - sample analysis and preparation times reduced by up to 90%. Accomodate more samples and run them in less time.- Flexibilty - Functions as an on-line SPE system and a stand alone UPLC system with multiple optical and mass spectrometer detection options. Maximize laboratory asset utilization.- Cost - the use of significantly smaller sample volumes can reduce shipping costs from remote locations.- Productivity - reduces sample processing time. Scientists can allocate more time to other laboratory tasks. On-line SPE/LC/MS for the detection of: - endocrine disruptors- fungicides- pesticides- personal care products- pharmaceuticals- soft drink additives- veterinary drug residues Specifications: Power: 95-240 V 350 VA 50/60 Hz Items delivered: - WATERS ACQUITY UPLC Online SPE Manager (OSM) Condition: The whole item is in excellent cosmetic as well as technical condition. It is 100% functional tested, runs as intended and is ready to be applied.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Hersteller: Siemens Modell: SIMATIC SITOP Modular Hutschienen-Netzteil (DIN-Rail) Power 20 P/N: 6EP1 (more) 436-3BA00 S/N: Q6U7660067 Beschreibung: Basis des modularen Konzeptes des Hutschienen-Netzteils 6EP1 436-3BA00 sind 24 V Grundgeräte mit 5 A, 10 A, 20 A und 40 A Ausgangsstrom. Das Gerät verfügt über eine umfangreiche Ausstattung und eignet sich durch die universellen Weitbereichseingänge für den weltweiten Einsatz an verschiedensten Versorgungsnetzen. Leistungsumfang: - 28.8 V/DC / 20 A- 480 W Leistung- Eingang 3-phasig- Eingangsspannungs-Bereich 320 - 550 V/3AC- Anschluss (Bauelemente): Schraubklemme- Geregelte potenzialfreie Ausgangsspannung DC 24 V ± 3%- Leerlauf- und dauerkurzschlussfest- 5 A- und 10 A-Variante mit Ultra-Weitbereichseingang AC 85 - 132/176/550 V für den einphasigen Anschluss (Netze mit Neutralleiter) und den zweiphasigen Anschluss (an zwei Außenleiter eines dreiphasigen Netzes)- 20 A- und 40 A-Variante mit Weitbereichseingang 3 AC 320 - 550 V für den dreiphasigen Anschluss oder mit umschaltbarem Eingang AC 85 - 132/176 - 264 V für den ein- und zweiphasigen Anschluss- Einstellbare Ausgangsspannung von 24 bis 28,8 V zur Kompensation von Spannungsabfällen- Umschaltbare Kennlinie für Konstantstrom bzw. speichernde Abschaltung im Kurzschlussfall- Power-Boost bis zum 3fachen Nennstrom zur selektiven Auslösung nachgeschalteter Sicherungen- 3 LED´s für 24 V o.k., Überlast und speichernde Abschaltung zur detaillierten Signalisierung des Betriebszustandes- Sichere elektrische Potentialtrennung (SELV gemäß EN 60950)- Funkentstörgrad (EN 55022) Klasse B und Oberwellenstrombegrenzung nach EN 61000-3-2 (außer 6EP1337-...)- CE-Kennzeichnung und UL/cUL-Approbation- Schnappbefestigung auf Normprofilschiene DIN EN 50022-35x7,5/15- Sichere elektrische Potentialtrennung (SELV gemäß EN 60950)- Funkentstörgrad (EN 55022) Klasse B und Oberwellenstrombegrenzung nach EN 61000-3-2 (außer 6EP1337-...)- CE-Kennzeichnung und UL/cUL-Approbation Technische Daten: - Typ: Getaktet - Eingangsspannung: 320 - 550 V/3AC - Anzahl Ausgänge: 1 x- Phasen: 3 - Anschlüsse: Schraubklemmen - Ausgangsspannung: 24 V/DC- Ausgangsspannung (max.): 28.8 V/DC- Ausgangsspannung (min.): 24 V/DC- Ausgangsspannung (nom.): 24 V/DC- Ausgangsstrom (Details): 20 A- Ausgangsstrom (max.): 20 A- Breite: 160 mm- Eingangsspannung (max.): 500 V/AC- Eingangsspannung (min.): 400 V/AC- Eingangsspannung (nominal): 400 V/AC - Herst.-Teilenr.: 6EP1436-3BA00 - Höhe: 125 mm- Leistung: 480 W- Max. Temperatur: + 70 °C- Min. Temperatur: 0 °C- Tiefe: 125 mm- Gewicht: 2.0 kg Lieferumfang: - Siemens SIMATIC SITOP Modular Hutschienen-Netzteil (DIN-Rail) Power 20 Das Gerät ist in sehr gutem einwandfreiem Zustand und 100% auf Funktion geprüft.

Manufacturer: Miele Model: E 106/1 Half Insert / Einsatz Details: - For flasks, graduated cylinder, (more) bottles, etc.- 26 spring clips, H 105 mm, distance between clips approx. 60mm- For use in lower or half injector baskets only- Height 116, Width 195, Depth 410 mm for several Miele Thermodesinfectors: PG 8535, PG 8536, G7883.. Items delivered: - Miele E 106/1 Half Insert The insert is used but very good condition.

Manufacturer: Varian Model: DS 102 Two-stage Rotary Vane Pump + Oil Mist Eliminator KF 25 949-9395 s (more)erie S/N: 219579 Description: Thanks to a very simple and highly reliable design, this field proven DS Series rotary vane pump provides excellent vacuum performance. The quality and manufacturing standards ensure that the DS rotary vane pumps provide high pumping stability for light gases, low noise, minimal oil backstreaming, and a long operating life. The pump’s two-stage design allows for low operating temperature, minimal backstreaming at low pressure and good pumping efficiency and gas ballast. It delivers a pumping speed of max. 114 liters per minute, low noise and a long operating life. It conforms to European Union directives (CE) and Restriction of Hazardous Substances (RoHS) requirements, and it is also UL and Canadian Standards Authority (CSA) approved. Oil Mist Eliminator KF 25 949-9395 serie is assembled at the outlet of the rotary pump and the main purpose is to purify the exhaust gases from oil mists. The use is advised for pumps which have to work for a long time at intake pressures exceeding 10 mbar, or with the ballasting tap open. Applications: - Analytical Instruments:Dual Stage Rotary Vane Pumps are practically the only primary vacuum pumps used on GC-MS and MALDI-TOF Instruments:GC-MS typically uses this small pump - the pump is needed to rough the system and back the high vacuum Turbo or Diffusion pump. MALDI-TOF depending on system size, uses the DS102 as roughing or interface pump.- Leak Detection:DS102 is typically used to back the Helium Mass Spectrometer Turbo or Diffusion pump.- Industrial Vacuum Processes:Vacuum coatings, Metallurgy Vacuum Furnaces, Lamps and TV Tube manufacture, Sterilizers, Freeze Dryers, Glove Boxes, High Speed Centrifuges, and Flywheels (for energy storage) represent the main Industrial applications for Dual Stage Rotary Vane pump. - High Energy Physics and Research Laboratories:In these applications the Rotary Vane pumps are mainly used in combination with Turbo pumps. The combination is typically used to rough and pump High Vacuum experimental chambers or to start Ion Pumps in ultra high vacuum systems.Features: - Dual Stage Pump:The two stage design allows low 10-3 mbar operation, low operating temperature, minimal backstreaming at low pressure, good pumping efficiency and gas ballast in the high 10-3 mbar region.- Forced Oil Circulation:The dedicated oil circulation gear pump ensures efficient and reliable lubrication of the pump from atmospheric pressure throughout the entire vacuum operating range.- Built-in Oil Shield:This feature minimizes the oil mist at the pump exhaust. Apart from drastically reducing the oil consumption over long periods of operation, this results in a reduction of air pollution limiting the impact on the environment. Specifications: Free air displacement:- 60 Hz: 114 l/min (4 cfm)- 50 Hz: 95 l/min (5.7 m3/h)Pumping speed:- 60 Hz: 3.5 cfm- 50 Hz: 5 m3/hUltimate partial pressure: 10-4 mbarUltimate total pressure: 2 x 10-3 mbarUltimate total pressure with gas ballast: 2 x 10-2 mbarWater vapor tolerance: 15 mbarWater vapor capacity: 60 g/hOil capacity min/max: 0.2/0.5 lMotor rating 1ph:- 60 Hz: 0.55 kW- 50 Hz: 0.45 kWNominal rotation speed:- 60 Hz: 1800 rpm- 50 Hz: 1500 rpmInlet flange: 25KF DNExhaust flange: 25KF DNOil Mist Eliminator's pneurop fitting: KF 25Oil Mist Eliminator's material: Nylon 30VF Items delivered: - Varian DS 102 Two-stage Rotary Vane Pump + Oil Mist Eliminator KF 25 949-9395 serie Condition: The whole item is in used but good condition. It is 100% functional tested and ready to be operated.