Brüel & Kjaer WB1056 Multiplexer Box for 3 MM0036 RTA - Transducers

As a workhorse for HPLC method development, XBridge BEH C18 sorbent can be used over an entire range (more) of mobile phase pH (1-12). The trifunctionally bonded C18 ligand provides you with a universal column for most HPLC separations and gives you the widest usable pH range, superior low pH stability, and ultra-low column bleed.

The BVC control serves for efficient and convenient aspiration of supernatants. The vacuum level – a (more)nd thus the suction force – is exactly adjustable by the electronic touch panel and allows a sensitive and reproducible operation. The chemically resistant diaphragm vacuum pump is automatically turned on and off as needed, which reduces the low noise level even further. The BVC control is available in two complete equipment options with different collection flasks. The 2l borosilicate glass bottle with a protective coating has a very high chemical resistance. For larger amounts of liquids the 4l bottle of unbreakable polypropylene (PP) is used (included). The smooth surfaces allow an easy cleaning of the systems. Max. pumping speed: 0.7 m³/h Ultimate vacuum: 150 mbar Vacuum controller: Touchpanel Control range: 150 – 850 mbar (adjustable) Collection bottle: 4l Polypropylene Max. back pressure: 1.1 bar Dimensions (LxWxH): 408 x 194 x 500 mm Weight: 7.7 kg

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. Included are; ITEM-24005 Leica EMCFD Freeze Substitution Unit with Leica EMUV and Nitrogen DewarITEM-37519 Bio-Rad HydroTech Vacuum PumpITEM-37955 Sorvall SLA-1500 Super-Lite RotorITEM-37517 Brooks CryoPod CarrierITEM-38147 1 x Panasonic UF-490-AB & 2 x HP Laser Jet P2055dITEM-38148 JVC HR-S7500EK VCRITEM-37967 For.A MV-40EP Multi ViewerITEM-37968 Cisco TelePresence SX-20 Codec Video Conference with 2 x TTC8 HD CamerasITEM-37969 TOA C-MV8 Multi Channel Viewer and Telemetrics CP-ITV-VCC4 Camera ControllerITEM-37970 Pair of Audio Technica ATW-R14 UHF Diversity ReceiversITEM-37971 Australian Monitor TX8000 Audio MonitorITEM-37972 Cambridge Audio CT200 Twin Tape DeckITEM-37973 Technics SL-PS77OA CD Player and SU-A600 Stereo AmplifierITEM-37974 Pair of TDL Electronics NFM SpeakersITEM-37515 Grant QBD1ITEM-37516 Mettler Toledo RS-P42 PrinterITEM-37975 Lot of 3 x KTP Portable Microloop Hearing Induction Loop System With ReceptorsITEM-37514 9 x RS Pro ClockITEM-37513 7 x Fisherbrand Traceable StopwatchITEM-16897 HELIX METAL MONEY BOXITEM-17244 BDH Electrophoresis TankITEM-17224 Marconi Instruments LTD Circuit Magnification Meter TF1245

Scilogex Fixed Angle Rotor 50mL x 8 The Scilogex Fixed Angle Rotor 50mL x 8 has the capacity to acco (more)modate 8 x 50mL tubes and can a reach maximum speed of 5,000RPM. For use with the DM0636 centrifuge. INCLUDED: The Scilogex Fixed Angle Rotor 50mL x 8 includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Polyscience AD17VB6G-A11B 17L Viscosity Bath, Advanced Digital (Ambient +10° to 150°C), 120V, 60Hz3D (more) Visualization of the Polyscience Viscosity BathThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. The Polyscience AD17VB6G-A11B 17L Viscosity Bath, Advanced Digital is intended for the precise temperature control of suitable liquids in a reservoir. Extremely easy to use and maintain, it combines design innovation with highly intuitive operation to deliver convenient and versatile liquid temperature control for a wide range of applications. Features Intuitive 3.75” (9.5 cm) display with touch-pad control 4 languages: French, German, Spanish, English Swivel 180™ Rotating Controller On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485 and external temperature probe On-screen prompts Automatic performance optimization and specific heat tuning Single-point calibration capability INCLUDED: The Polyscience AD17VB6G-A11B 17L Viscosity Bath, Advanced Digital (Ambient +10° to 150°C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Edwards T-Station 85H Wet Turbo Station CF63, 100-120V Ultimate Pressure <5 x 10-9 mbar Inlet Con (more)nection DN 63 CF Leak Tightness <1 x 10-6 mbar ls-1 Features - Single dedicated button to start/stop pumps; Easy to read accurate display - Base plate includes rubber feet and cut-outs in the sides for manual handling - The nEXT85 and nEXT300 turbomolecular pumps, XDD1 dry diaphragm pump and E2M1.5 backing pump are all user serviceable - Integrated air cooler acts to cool internal power supply and pump/controller for quiet operation avoiding multiple fans - All metal frame means rugged design that can take abuse without cracking or breaking - Inlet flange options - Available with either an NW40, ISO63 or CF63 inlet flange to suit your application The Edwards turbomolecular pumping stations are a comprehensive range of products providing versatile vacuum solutions in many different applications. All the nEXT turbomolecular pumping stations are supplied fully assembled and ready to run straight out of the box with nEXT turbomolecular pumps and backing pumps that are user serviceable. There are 2 models in the turbomolecular pumping stations range the entry level T-Station 85 and the higher capacity T-Station 300.Both the T-Station 85 and the 300 come with an integrated Turbo and Active Gauge controller which enables single button start/stop of the system. With the ability to control one of the active gauges, vent valve control and delayed start of the turbomolecular pump to either time or pressure if a gauge is fitted, the T-Station 85 ideal for general laboratory needs and the T-Station 300 extending the performance envelope for the R&D sector.nEXT T-Station 85the T-Station 85 is a low cost, compact turbomolecular pumping station that seamlessly combines an nEXT85H turbomolecular pump with either a dry diaphragm or oil sealed backing pump, and a simple controller, providing pumping speeds of 47 to 84 ls-1.INCLUDED: The Edwards T-Station 85H Wet Turbo Station CF63, 100-120V includes: - T-Station Pumping Station Base - E2M1.5 Rotary Vane Pump - nEXT85H Turbomolecular Pump with CF63 Inlet - All Necessary Tubing and Cables for Turn-key Operation - Operator's Manual - 1 Year Manufacturer's Warranty

CDS Chemical Data Systems 190 Pyroprobe ( No Probes) This was removed from a university lab where it (more) was surplus to requirements. The unit powers up but we were unable to test it further. It is in reasonably good cosmetic condition with marks from use.

MARSHALL Select MS-OT40LE Overhead Stirrer, 40L Maximum Stirring Quantity 40L Speed Range 50 to 2,2 (more)00 RPM Maximum Viscosity 50,000 mPas Features - High torque of 60 Ncm suitable for viscous medium stirring - Brushless DC motor ensures long life, maintenance-free operation, and safety in explosive environments - LED display for precise monitoring of actual speed - Over torque protection and safety circuits provide safe stop functions in anti-stall or overload conditions - Large chuck diameter supports many shaft types, increasing versatility - Through-shaft design allows for easy adjustment of the impeller position - Automatic resumption of stirring at preset speed after power loss - IP21 protection class offers basic protection against solid objects and dripping water - Analog speed controls displayed on the LED for easy adjustments and monitoring - Designed to accept pass-through stirrer rods for flexible setup options - Visual alarm alerts for immediate notification of system issues or malfunctions - Explosion-proof motor enhances safety in volatile environments The MARSHALL Select MS-OT40LE Overhead Stirrer stands out for its high reliability and superior performance, engineered to manage stirring tasks up to 40L. It features a versatile speed range from 50 to 2,200 RPM, suited for a wide variety of laboratory needs. This stirrer is equipped with a brushless DC motor, renowned for its long life, maintenance-free operation, and explosion-proof qualities. The MS-OT40LE includes an LED screen that displays the actual speed, ensuring precise control over your mixing processes. It's capable of handling high viscosities up to 50,000 mPas with a maximum torque of 60 Ncm, making it ideal for stirring viscous mediums. The large chuck diameter supports many shaft types, enhancing its adaptability. Safety is a paramount feature of this device, with integrated circuits that provide a safe stop function in conditions of anti-stall or overload, where over torque protection automatically stops the motor. Additionally, the through-shaft design allows for easy adjustment of the impeller position to suit varying laboratory needs. In the event of a power outage, the stirrer automatically resumes operation at the preset speed once power is restored, ensuring continuity and efficiency. The IP21 protection class provides basic protection against solid objects and dripping water, further securing the unit in active laboratory environments. INCLUDED: The MARSHALL Select MS-OT40LE Overhead Stirrer, 40L includes: - Key of Drill Chuck - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The AP-12.1.5Y is the first automatic device designed to calibrate single- and multi-channel micropi (more)pettes with [d] 1 µg, in accordance with ISO 8655 requirements. Pipette calibration can be performed in the volume range from 0.5 μl a maximum of 12 channels of fixed and variable volume pipettes. The impressive calibration readability is the result of the co-called separation chamber which stabilizes the measurement path and protects it from excessive air movement. This is a guarantee of high precision measurements. AP-12.1.5Y guarantees the comfort of work. The ergonomic design of the device makes it possible to empty weighing vessels, and their overfilling is signalled by Ambient Light. When calibrating a multichannel pipette, a pump is used to simultaneously remove water from four vessels, greatly reducing the time required for pipette calibration. Other factors that affect the ergonomics of work: compact, mobile design clear, intuitive multilingual menu data security transfer of results directly to the customer’s computer application internal procedure report automatic periodic adjustment of the device. After emptying a 12-channel pipette, the AP-12.1.5Y checks all channels in a single cycle. In addition to a database of pipette calibration reports, the AP-12.1.5Y includes a database of pipettes that is editable and contains maximum permissible error values according to ISO 8655. The report database, in turn, contains measurements and error values calculated for individual points and volumes. The user determines the format and content of the reports. The AP-12.1.5Y monitors the ambient conditions using calibrated sensors: THB S (ambient conditions measurement) and THB W (liquid temperature measurement), in accordance with ISO 8655. To calibrate the device with mass standards, the weighing pan must be replaced with a pan dedicated to checking and calibrating the balance (both are included in the standard equipment). When purchasing the AP-12.1.5Y, you get: two calibrated sensors: THB S and THB W, two weighing pans: standard, and for balance test and calibration, a pump equipped with two nozzles: to draw water from one container or from four containers at once, a brush, a pincette, a vessel for the liquid, the Calibration Certificate for the balance.

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).