Boekel Scientific 1494 Concentric Ring Bath, 8 place, 115V

Polyscience 040300 Model 210 Heated Recirculator (Ambient to +70C), 120V, 50/60HzDesigned to provide (more) low-cost pumping and heating for closed-loop applications, it connects directly to your own tank or system and provides accurate control within a frequently used temperature range. This Recirculator is ideal for applications such as thawing plasma, tempering photographic solutions, or circulating to an external device. Features Low-cost pumping and heating for closed-loop applications Provides accurate control within a frequently used temperature range Ideal for applications such as thawing plasma, temperating photographic solutions or circulating to an external device The Polyscience 040300 Model 210 Heated Recirculator (Ambient to +70C), 120V, 50/60Hz is brand-new and ready for immediate shipment. Includes: Power Cord Operator's GuideManufacturer's Documentation Full 2 Year Parts and Labor Warranty Polyscience 040300 Model 210 Heated Recirculator (Ambient to +70C), 120V, 50/60Hz Specifications Polyscience 210 Heated Recirculator Series Specifications Working Temperature Range °F Ambient to 158° Working Temperature Range C Ambient to 70° Temperature Stability °F ±0.4° Temperature Stability C ±0.2° Pump Type Centrifugal Pump Speed Single Process Connections 1/2" barb fitting Over-Temperature Protection / Failsafe Heater Control Yes Low Liquid Level Protection Yes Maximum Ambient Temperature °F 95° Maximum Ambient Temperature C 35° Overall Dimensions (L x W x H) (inches) 8 x 9.5 x 8 in Overall Dimensions (L x W x H) (cm) 20.3 x 24.1 x 20.3 cm Shipping Weight (pounds) 12.0 Shipping Weight (kilograms) 5.4 Catalog Page Number 67 60 Hz Only Part Number 040300 Maximum Pressure (psi) 2.0 Maximum Pressure (bar) 0.13 Maximum Pressure Flow Rate (gpm) 3.00 Maximum Pressure Flow Rate (l/min) 11.4 Included Hardware Tubing and clamps Heater Wattage 750

Julabo DYNEO DD-310F Refrigerated Circulator with Analog Output and Synthetic Refrigerant (R449A), 1 (more)15V/60Hz Refrigerant R449A Working Temperature Range -30°C - 200°C Cooling Capacity 300W at 20°C Features - Powerful cooling machines - Suitable for internal and external applications - Optimized cooling coil design saves space in the bath tank - Powerful and infinitely adjustable pressure pump - Flow rate 27 l/min, pressure 8.7 psi - Easy switching between internal and external circulation - Large color TFT display, multilingual interface - Central rotary knob (controller) simplifies operation - Integrated programmer for 8 x 60 program steps - Integrated external Pt100 connection - USB port - RS232 interface or analog interfaces (optional) - Bath cover included with delivery - Integrated drain makes emptying liquid easy and safe - Class III (FL) according to DIN 12876-1 DYNEO™ DD-310F refrigerated/heating circulator with an operating range of -30…+200 °C and ±0.01 °C stability. Suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. The DYNEO™ DD circulator incorporates easy change-over for control of fluid circulation internally or externally. A color TFT display with central rotary knob controller includes a multi-lingual interface, integrated programmer, Pt100 port for external temperature control, USB-B connection for external PC control and USB-A for data-logging. Additional communication options include an RS232 port or an analog module interface, for voltage or current control. Infinitely variable centrifugal pump capacity of 8-27 L/min with pressure to 1.5-10.2 psi. Stainless steel bath tank (3-4L) with integrated drain port. Unit fittings: M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. 0.3kW cooling power at 20 °C with 20W at -30 °C. Options for heating power (1kW or 2kW) and refrigerant (R290 natural refrigerant or R449A synthetic refrigerant).Class III (FL) according to DIN 12876-1.INCLUDED: The Julabo DYNEO DD-310F Refrigerated Circulator with Analog Output and Synthetic Refrigerant (R449A), 115V/60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph 036110272 Hei-PLATE Mix 'n' Heat Core Advanced Sensor Package, 145mm Plate Temperature Rang (more)e 20 to 300°C Speed Range 100 to 1,400 RPM Stirring Capacity 20L Features - User-friendly design of our entry-level model, featuring two rotary knobs for easy access to stirring and heating functions - Set your desired speed and temperature effortlessly using the intuitive scale, with maximum values of 1,400 rpm and 300 °C - Ensure safety with the large safety distance between the heating plate and control elements - Activate the heating function separately with the LED button indicator - Durable and reliable Kera-Disk made of anodized aluminum, offering chemical resistance and scratch proof-properties - Precise heating power and temperature control, backed by PID heating technology - Maximize efficiency with compact dimensions (168 × 101 × 299 mm) The Heidolph 036110272 Hei-PLATE Mix 'n' Heat Core Advanced Sensor Package, 145mm Plate is designed with two rotary knobs to allow direct access to the two main functions. The speed and temperature are set using a scale. The maximum values are 1,400 rpm and 300 °C. This magnetic stirrer is very easy to use and is equipped with the most important safety features. The large safety distance between the heating plate and the control elements, as well as the optical residual heat indicator at temperatures 50 °C, protect against burns. The heating function can be activated separately and is indicated by the LED button lighting up. The patented Kera-Disk® footprint made of anodized aluminum, is chemical-resistant, scratch-proof, and has a diameter of 135 mm. This unique size makes it suitable for use with many accessories and samples on a small footprint. The material used also enables the fastest heating times.Click Here to View Product Video INCLUDED: The Heidolph 036110272 Hei-PLATE Mix 'n' Heat Core Advanced Sensor Package, 145mm Plate includes: - Hei-PLATE Mix'n'Heat Core magnetic stirrer (145 mm diameter) - EKT Hei-Con electronic contact thermometer and Holder - Silicone Protective Cover - Power Cord - Operator's Manual - Manufacturer's Documentation - 10 Year Manufacturer's Warranty

2x 2 PE pull-out trays (470 x 400 mm) Exhaust air connection on the cabinet rear (75 mm) Dimensions  (more)(WxDxH): 1100 x 609 x 631 mm Weight: 68 kg

SUITABLE FOR EVERY LABORATORY NEED The AREX magnetic stirrer is a great tool for basic laboratory ap (more)plications, but with the optional VTF system, which allows you to thermoregulate the sample up to 300°C with an accuracy of ± 0.5°C, it will be possible also use it for more complex applications. RESISTANCE, SAFETY AND PERFORMANCE The plate of the AREX 5 Velp model is IP42 certified and is made of aluminum alloy coated with a ceramic layer, which guarantees protection from scratches and chemical agents, making it very resistant and easy to clean. It is therefore preferred in laboratories where acids, bases and solvents are used. Safety circuits and overtemperature protection guarantee complete protection for the operators. Two light indicators inform the user when the heating function is active. Even when the instrument is switched off, an indicator light remains on until the plate temperature drops below 50°C. The plate structure and the insulating disc protect the internal parts and ensure high resistance to the most demanding laboratory environments and applications, for example when working with cold fluids (below 0°C). AREX 5 is designed to last over time and like most Velp products it is guaranteed for 3 years. PRECISE SHAKING ARE 5 is equipped with a powerful brushless motor for daily applications, being able to agitate up to 20 liters (H2O). It is also equipped with SpeedServo™ technology, which allows the speed to be kept constant even when the viscosity of the sample varies. APPLICATIONS ARE 5 is the ideal solution for temperature sensitive applications in many industrial, research and academic laboratory sectors. THE AREX PANEL: BEAUTIFUL AND SIMPLE TO USE By turning the left knob it will be possible to adjust the temperature up to 310°C, while with the right one it will be possible to set the stirring speed from 100 to 1500 rpm. COMPARISON TABLE OF THE NEW VELP SERIES 5 MAGNETIC STIRRERS: Digital thermoregulation with VTF By connecting VTF digital thermoregulators, your AREX 6 transforms into a superior tool, with a built-in timer to schedule activities. The thermoregulator is ideal for multiple applications and meets the most demanding requirements in terms of precision, reliability and flexibility of use thanks to the innovative FUZZY LOGIC Technology. Automatically adapts thermoregulation to various factors such as power, load and heat dispersion. The VTF guarantees premium performance in terms of temperature control: it allows better alignment with the set temperature (with an accuracy of ± 0.5 °C) and less initial 'overshoot' (initial discrepancy compared to the set temperature). Furthermore, VTF is equipped with a system to simplify installation on the support rod and facilitate positioning of the Pt100 probe in the most commonly used containers. The two clamps allow height adjustment while a sliding clamp allows horizontal adjustment.

The ramps are used to easily place the trolleys containing loads onto the 4-load-cell platform scale (more)s. They enable placing the scale into the production line as a measuring or control workstation. Uncomplicated loading and unloading of the weighing platform allows smooth control over the loads and is time saving.

The MW-01-A mass converter is designed to be a component of an industrial load cell scale. Depending (more) on the needs, communication with the mass converter can be carried out via the following communication interfaces: RS232, RS485, Ethernet, Ethernet IP, Profibus or Profinet. The MW-01-A mass converter is compatible with indicators and PC. Operation of the MW-01-A mass converter via PC is carried out using „MW Manager” software.

HX7 HR scale’s multi functions The HX7 HR scale is a device comprised of AISI 304 (IP66 / IP68 (more)) stainless steel terminal the PUE HX7, and AISI 316 (IP 68 / 69K) stainless steel weighing platform. The HX7 HR has been designed to operate in challenging conditions, even in places where the platform is exposed to acids. Display The 7” colour graphic display and the diode bar graph, which signals current net weight of a load in reference to the scale range or declared min, max thresholds, boost comfort especially in case of piecework where fast and precise presentation of product mass deviation is required with regard to the limit values. Hermetic communication interfaces Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Software The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

Corepoint Scientific PRF102WWW-040 Solid Door Laboratory Combo 1C to 10C Refrigerator/-37C to -43C F (more)reezer Temperature Setpoint Range Refrigerator: 1C to 10C / Freezer: -37C to -43C Capacity 5.2 cu. ft. Refrigerator / 4 cu. ft. Freezer Defrost Method Refrigerator: Cycle / Freezer: Manual Features - Compact, space-saving design with a versatile 1°C to 10°C refrigerator and -15°C to -25°C freezer combo, ideal for maximizing facility floor space - Two solid, right-hinged, self-closing doors with recessed handles and magnetic gaskets ensure a secure, positive seal to maintain optimal temperatures - High-density urethane foam insulation in the cabinet and doors for superior temperature retention and energy efficiency - Three adjustable shelves in both the refrigerator and freezer, equipped with guard rails to prevent items from being pushed against the back wall - Advanced microprocessor temperature controllers and digital displays allow for precise temperature management and monitoring - Forced draft air circulation in the refrigerator ensures consistent cooling throughout the storage space The Corepoint Scientific PRF102WWW-040 is a compact, freestanding laboratory combo unit that includes a refrigerator and a manual defrost freezer. Designed to maximize facility floor space and efficiency, this unit features separate chambers for refrigeration and freezing, each with its own microprocessor temperature controller and digital display for precise temperature control and recovery. The refrigerator has a capacity of 5.2 cu. ft., maintaining temperatures between 2°C to 8°C, while the freezer has a capacity of 4 cu. ft., with an operating range of -37°C to -43°C. Both compartments are equipped with audible and visual high and low temperature alarms, two probes (one in air and one in a sample bottle), and remote alarm contacts to ensure the security of critical samples. The unit includes three adjustable shelves in each chamber, a bottom footed shelf for air circulation, and a back wall evaporator cover. Additional features include keyed door locks, magnetic door gaskets for a positive seal, recessed door handles, a stacking kit, leveling legs, LED interior lights, and a probe access port. The white cabinet and doors are insulated with high-density urethane foam, using HFC-free refrigerant (R600a) for the refrigerator and natural hydrocarbon refrigerant (R290) for the freezer, ensuring an environmentally friendly operation. INCLUDED: The Corepoint Scientific PRF102WWW-040 Solid Door Laboratory Combo 1C to 10C Refrigerator/-37C to -43C Freezer includes: - Stacking Kit - Leveling Legs - 3 x Adjustable Refrigerator Shelves - 3 x Adjustable Freezer Shelves - Key for Door Lock - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The Neon Transfection System enables fast and efficient delivery of nucleic acids into all mammalian (more) cell types, including primary, stem, and difficult-to-transfect cells. The flexible and open system allows the user to perform high-quality transfections using optimized or user-defined protocols in three simple steps with as few as 2 x 104 cells per reaction. A novel reaction chamber provides a dramatic increase in transfection efficiency and cell viability. The Neon Transfection System is: Efficient – up to 90% in many cell types, including difficult-to-transfect cells, primary, and stem cells Flexible – easily transfect from 2 x 104 cells to 6 x 106 cells per reaction Simple – easy to use, with a single reagent kit for all cell types Versatile – open system allows electroporation parameters to be optimized freely Specifications Format: Electroporation Pipette Tip System: Neon Transfection System Cell Type: Established Cell Lines, Hard-to-Transfect Cells, Stem Cells, Primary Cells Power Limit: 300 W Current Limit: 3.0 – 6.0 A Reaction Time: 1 sec Voltage Limit: 0.5 – 2.5 kV Classification: Animal Origin-Free, Reduced Serum, Chemically Defined, Low-Protein, Reduced Growth Factors, Xeno-Free Serum Compatible: Yes Compatible Products: Transfection Grade Nucleic Acid purification kits, siRNA vectors, DNA vectors Sample Loading Volume: Depends on kit used Sample Type (Specific): Plasmid DNA, Synthetic siRNA Purity or Quality Grade: Transfection Grade Starting Material (Cell #): 2 x 104 – 6 x 106 cells; Varies by cell type