BioTek MultiFlo FX Multimode Dispenser

FibraStage is an inexpensive, labor-saving and disposable cell culture system capable of producing p (more)roteins, viruses or cell mass from anchorage-dependent and suspension cultures. The system uses 500 mL disposable bottles pre-filled with FibraCel disks, a unique solid-support matrix for cell growth. FibraCel provides a low-shear environment and extremely high surface area (100 cm²) for cell growth, equivalent to dozens or even hundreds of T-flasks and roller bottles. Each FibraStage system holds up to four bottles, capable of yielding 2 x 10¹⁰ cells. Oxygenation and media mixing are simply and effectively accomplished by placing the bottles in the FibraStage device, which collapses bellows at the base of each bottle forcing media up through the disk bed. Cells remain entrapped in the disk bed during the entire run, simplifying media replacement and product recovery. The system eliminates autoclaving, cleaning, lengthy learning curves, costly start-up, and cross-contamination issues between batches, and requires only a standard CO₂ incubator.

KR-04-1 converter is designed for scales not equipped with the Ethernet interface. The device enable (more)s operation of a scale equipped only with RS 232 in weighing systems (e.g. CPG) based on LAN network. The converter features a plastic housing, 1.7-meter-long RS 232 cable with DB9/F plug, Ethernet RJ45 connector, and a power supply permanently connected to the converter with 1.8-meter-long cable. The Ethernet cable with RJ45 plugs does not come standard with the converter. The latest version of Network Enabler Administrator software: 2.11

Ohaus 30314826 6 x 85ml Fixed Angle Rotor The Ohaus 30314826 6 x 85ml Fixed Angle Rotor accommodates (more) a capacity of up to 4 x 85ml. This rotor is designed for use with Ohaus FC5916, FC5916R, FC5816, FC5816R, FC5718, and FC5718R series centrifuges. The Ohaus 30314827 fixed angle rotor reaches speeds up to 13,000 RPM with a maximum RCF of 21,726 x g. INCLUDED: The Ohaus 30314826 6 x 85ml Fixed Angle Rotor includes: - Ohaus 30314826 6 x 85ml Fixed Angle Rotor - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Ramp scale with stainless-steel load cells is intended for meat, fish, pharmaceutical, cosmetic and  (more)chemical industry. The scale is equipped with LD4N system allowing lifting the platform up, useful for maintenance purposes. The mechanism enables safe platform lifting and does not require physical exertion or additional equipment. Upon platform lowering, the scale is ready to carry out measurement. There is no need for recalibration. The scale is made of OH18N9 stainless steel and is equipped with PUE H315 indicator. On a customer request the scale can be made of steel of increased anti-corrosion resistance. The length of the cable for connecting the indicator to the platform - 3m. Ramp scale with LD4N system is equipped with only one ramp. Dual range weighing instrument for an additional charge. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. * RFID ISO/IEC 14443 Type A, 13.56 MHz

This set is the perfect solution for laboratories and institutions requiring the highest precision.  (more)These cylindrical mass standards are made from the highest quality materials, ensuring excellent stability and resistance to environmental changes. Key Features: Highest class of accuracy: Class E1 is the highest standard of accuracy, making these standards ideal for calibrating precision measuring instruments. Cylindrical Shape: The cylindrical shape of the standards ensures ease of handling and precise placement on weighing platforms. Plastic packaging: The weights are delivered in a durable plastic case, ensuring their safe storage and transport. Set Includes: 11 mass standards, 2 pairs of tweezers, 1 brush and 1 pair of gloves. By choosing the E1 class mass standard set from RADWAG, you invest in reliability, precision, and durability, which translates to excellent quality in your laboratory work.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW