Bio-Rad Trans-Blot Turbo

Malvern Panalytical Viscosizer TD is an automated biophysical characterization tool utilizing Taylor (more) Dispersion Analysis and providing ultra-low volume, solution-based molecular size and stability measurement capabilities, combined with Poiseuille flow for relative viscosity assessment. Viscosizer TD offers biopharmaceutical researchers an orthogonal technique for conformational stability analysis, which is unrivaled in extending into label-free measurements in highly complex solutions, and encompasses a critical size range from small molecules through to protein-based systems. Light source: Pulsed xenon lamp Wavelength filter: 254 nm UV Beam wavelength: 190 to 1100 nm Band pass: 10 nm Injection modes: Hydrodynamic injection Pressure features: On inlet only Flushing pressure: 0 to 3000 mbar Temperature control: Samples and buffer cooling, 4°C to 40°C Equipped with a VSR2009-0384 uncoated capillary Internal diameter: 75.6 µm Length to end of window 1: 450 mm Length to end of window 2: 850 mm Total length: 1300 mm

DW Scientific Whitley Automated Spiral Plater with Whitley Vacuum Source (WASP) This system was remo (more)ved from a university lab where it was surplus to requirements. The unit powered up and read “System Error”. Therefore, it is listed as Spares or Repairs. Includes the following: 1x DW Scientific Whitley Automatic Spiral Plater with Whitley Vacuum SourceS/N: WA03DB 1x DW Scientific Whitley Vacuum SourceS/N: NV06CM

PT0443 Cable is used to connect the 5Y series balance or the PUE CY10 terminal to a computer. Its st (more)andard length is 1,8 m. Optionally, the cable is used to connect the 5Y series balance or the PUE CY10 terminal to: AS X2 and AS R series balances PS X2 i PS R series balances PM C32 series balances WLC and WTC series balances, and C315 series scales MAS and MPS series weighing modules

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Scilogex 0.2mL 0.5mL and 1.5/2mL Block The Scilogex Block has the capacity to accommodate 0.2, 0.5,  (more)and1.5/2.0mLtubes. 18 holes each have a diameter ranging in sizes from 6, 7, and 10mm and overall dimensions are 15 x 9.5 x 5cm. INCLUDED: The Scilogex 0.2mL 0.5mL and 1.5/2mL Block includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Wave Bioreactor System 2/10 EH Lab This system was removed from a university where it was surplus to (more) requirement. All units are in good cosmetic condition and powered up, we are unable to test this system further at our facility. The system comprises the following: Wave Bioreactor System 2/10 EH BASE2/10EHCode: 28943517S/N: 1578302 PERFCONT2ECode: 28943517S/N: 1578302 CO2MIX20Code: 28945751S/N: 1475936

Thermo Electron Heraeus Multifuge 4 KR Refrigerated Centrifuge with Rotor This was removed from a & (more)nbsp;lab where it was surplus to requirements. The unit has been fully tested and is in full working order up to 4400rpm. It is in good cosmetic condition but has a crack in the lid viewing window. It does not affect the operation. Included with it are; Sorvall Heraeus Rotor75006476Max 4400 rpm 4 x Sorvall Heraeus Buckets75006477 FMax 4400 rpm

The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded (more) 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP66 / IP68, makes it suitable for use in industry. HX7.4 H/Z Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. The terminal's system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Ohaus ISHD23HDG Incubating Heavy Duty Orbital ShakerIncubating Heavy Duty Orbital Shakers offer exce (more)ptional temperature uniformity and are designed for a variety of shaking and incubating applications. The exclusive Opti-Flow Forced Ventilation System utilizes twin induction or a single large fan. Air is deflected around & not directly on samples, creating a circular flow of air ensuring uniformity. For repeatable results, the exclusive Accu-Drive shaking system ensures speed accuracy. The Triple Eccentric Drive provides consistent shaking motion throughout the entire speed range. The chambers for the ISHD23HDG and ISHD23CDG units are large enough to hold 2 x 6 L Erlenmeyer flasks with optional clamps and platform. INCLUDED: The Ohaus ISHD23HDG Incubating Heavy Duty Orbital Shaker includes: - Non-skid Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty Ohaus ISHD23HDG Incubating Heavy Duty Orbital Shaker Specifications MotionOrbital, 25 mmCapacity50 lb (22.7kg) @ 125 rpm, 10 lb (4.53kg) @ 500 rpmTemperature RangeAmbient +5°C – 65°CUniformity± 0.5°C at 37°CSpeed Range15 rpm – 500 rpmTray Size (LxW)18 in x 18 in (457 mm x 457 mm)CalibrationTemperature calibrationCommunicationRS232 ControlDigital Dimensions23.5 in x 32.1 in x 26.6 in (596 mm x 815 mm x 675 mm) (HxLxW)Drive System Triple Eccentric; Brushless DC Motor Inner Dimensions (HxHxLxLxWxW)17 in x 432 mm x 20.6 in x 523 mm x 24.8 in x 629 mmNet Weight224.07 lb (101.6 kg)Power120V, 8A, 50/60HzPower Consumption800 WSafety CertificationTUVSpeed AccuracyAbove 100rpm +/- 1%, Below 100rpm /- 1 rpmSpeed Range15 rpm – 500 rpmTimer1 second – 160 hoursTray ConstructionAluminumWorking Environment59°F – 90°F, 80%RH, non-condensing (15°C – 32°C, 80%RH, non-condensing)Comparison of ModelsSpecificationOhaus ISHD23HDGOhaus ISLD04HDGOhaus ISLDMPHDGOhaus ISLDMPHDGLOhaus ISRK04HDGOhaus ISWV02HDGTemperature RangeAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°CSpeed Range15 rpm to 500 rpm100 to 1200 rpm100 to 1200 rpm100 to 1200 rpm1 to 50 rpm1 to 30 rpmSpeed AccuracyAbove 100rpm +/- 1%, Below 100rpm +/- 1 rpm± 2% of set speed± 2%± 2%± 1 rpm± 1 rpmOrbit25 mm (0.98")3 mm (0.12")3 mm (0.12")3 mm (0.12")N/AN/AMaximum Weight Capacity50 lb (22.7kg) @ 125 rpm, 10 lb (4.53kg) @ 500 rpm8 lbs (3.6 kg)4 microplates or 2 micro-tube racks4 microplates or 2 micro-tube racks10 lbs (4.5 kg)5 lbs (2.3 kg)Tray Dimensions (L x W)18 x 18" (457 x 457 mm)11 × 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)10 x 7.5" (25.4 x 19.1 cm)9.25 x 7.25" (23.5 x 18.4 cm)Overall Dimensions (L x W x H)23.5 in x 32.1 in x 26.6 in17 x 11 x 10.7"17 x 11 x 7.75"17 x 11 x 7.75"17 x 11 x 10.5"17 x 11 x 10.5".comparison-table tr td:nth-child(2) { background-color: #fffacd; }

IKA INC 125 FC Digital Cooled Incubator Temp. Range -5°C to 100°C Temp. Uniformity ±0.3 K Chamber Vo (more)lume 125 l Features - Precise Temperature Control: Wide range from -5 °C to 100 °C. - Uses natural refrigerant R290. - 125 liters, with space for up to six grid shelves. - Decontamination mode, easy-to-clean surfaces, and defrosting function. - Excellent stability and uniformity, adjustable fan, and superior insulation. - Large LCD display, timer functions, and intuitive controls. - Stackable units, optional door locks, and various shelves. The IKA INC 125 FC Digital Cooled Incubator is an ideal solution for microbiological applications, offering precise temperature control from -5 to 100 °C. It features powerful compressor cooling technology and uses the environmentally friendly refrigerant R290. With a capacity of 125 liters, it can accommodate up to six grid shelves, providing ample space for various applications. The incubator ensures hygienic working conditions with a decontamination mode at 100 °C, easy-to-clean interior surfaces, and a defrosting function. Optimal temperature control is achieved through excellent stability and uniformity, an electronically adjustable fan, and superior insulation. Simple and intuitive operation is facilitated by a large LCD display, timer functions, and a temperature-controlled timer. The incubator also offers versatile accessories and services, including stackable units, optional door locks, and available installation and operation qualifications.INCLUDED: The IKA INC 125 FC Digital Cooled Incubator includes: - INC 125 FC digital Incubator cooled - IO T 2.10 Wire grid tray, chrome plated (2 pcs.) - Tilt protection / assembly material (2 pcs.) - USB A-B cable - Calibration certificate at 37 °C & 10 °C - Hose adapter (for hoses Ø 9-11 mm) - Power Cord - Operator's Guide - Two Year Manufacturer's Warranty