Benchmark R2020-1520 Tube holder, 11 x 1.5/2.0, 2/pk (1 pack included)

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-36591 Hybaid Maxi 14 Rotisserie Hybridisation Oven ITEM-36595 Hybaid Shake 'n' Stack Hybridisation Oven [condition: Used]ITEM-36596 Fisherbrand HU10 Mini-Plus Horizontal Gel Electrophoresis Unit [condition: Used]ITEM-36597 Hoefer Electrophoresis Unit [condition: Used]ITEM-36598 Hoefer Electrophoresis Unit [condition: Used]ITEM-36599 Luckham 4RT Rocking Table [condition: Used]ITEM-36607 UVP Transilluminator [condition: Used]ITEM-36608 Compaq TFT7010 Monitor [condition: Used]ITEM-36609 Thermo Hybaid PCR Express With Spare PCR Block [condition: Used]ITEM-39835 Hanna Instruments Water Test ITEM-39836 Jenway 9200 DO2 Meter ITEM-39766 Extech 407510 Heavy Duty Dissolved Oxygen Meter ITEM-39767 Job lot of Hanna Instruments Pocket PH Meters ITEM-38983 FluidX Xcap Microplate capper [condition: Used]ITEM-23169 Small desk fan SFE/1 [condition: Used]ITEM-39770 Hybaid PCR Express ITEM-39771 MJ Research PTC-225 Thermal Cycler ITEM-39772 Grant W6 Sonic Bath ITEM-37438 CBS Scientific EPS-300 X Power supply [condition: Used]ITEM-37439 SS 3H Hotplate Stirrer [condition: Used]ITEM-39774 Spectra Physics SP8480XR Scanning Detector ITEM-39775 Tyco Electronics LVC2KW Power Supply ITEM-39776 GS Laboratories 6593-10 CO2 Control Backup System Lab ITEM-39777 Spectra System AS3000 ITEM-39778 Test Tubes w/ Holding Rack ITEM-39779 Perkin Elmer L226-0103 Model LC-240ITEM-39101 Vevor Rolling Mill [condition: Used]ITEM-37443 Jenway 1000 Hotplate Stirrer [condition: Used]ITEM-39782 Pyrex 20L FlaskITEM-39783 Zippette Flask and Dispenser

Motic Panthera TEC POL EPI (Trinocular) Features - UC Plan Achromat objectives (strain-free) for FOV (more) 22mm - Transmitted and transmitted/ incident stand options - Transmitted light: LED/HAL light source interchangeable - Integrated focusable/ centerable Bertrand lens - Motic LightTracer: Coded nosepiece & Digital light intensity knob The Panthera TEC POL EPI series fills a last gap in the Panthera family: Polarization microscopes for all material sciences, ready to handle transparent samples like fibers and foils with their inherent birefringence. The Incident light models for opaque materials work out the specific reflectivity (bireflection) of flat surfaces. To extend the application fields, all microscopes carry an intermediate tube with Bertrand lens to analyze the crystal structure and interference figures of gems, precious stones and minerals.INCLUDED: The Motic Panthera TEC POL EPI (Trinocular) includes: - 4X/0.1 (WD 30.5mm) Objective - 10X/0.25 (WD 17.4mm) Objective - 40X/0.65/S (WD 0.6mm) Objective - 60X/0.8/S (WD 0.35mm) Objective - Widefield UC-WF10X/22mm with Diopter Adjustment - Dust Cover - Power Cord - Allen Key - Blue Filter - Halogen Bulb - Adjustable Key for Nosepiece - Interference Color Chart - Screws for Metal Extension Support - Operator's Guide Motic Panthera TEC POL EPI (Trinocular) SpecificationsOptical systemColour Corrected Infinity Optical System (CCIS®)Observation tubeTrinocular head, Siedentopf typeSensor type-Sensor size-Capture resolution-Live display mode (through Wi-Fi)-Live display mode (through ethernet)-Live display mode (through HDMI)-Inclination25º inclinedTrinocular light splitFixed 50:50Interpupillary distance48-75mmDiopter adjustmentOn both eyepieces, +/- 4 diopterEyepiecesWidefield UC-WF10X/22mm with diopter adjustmentNosepieceReversed quintuple, coded with single centering holesIntermediate BodyEpi-illuminator LED with rotatable analyzer 360º, Bertrand lens, fixed polarizer and slot for compensatorsObjective classificationPlan Achromatic objectives & CCIS® UC Plan Achromatic (strain-free), DINObjectives4X/0.1 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 60X/0.8/S (WD 0.35mm)Objective mounting threadW 4/5"x1/36" (RMS standard)StageCircular rotating 360º, lockableStage sizeØ160mmCondenserFocusable and centerable Achromat Swing-out Abbe condenser N.A. 0.90/0.13 (strain-free) and rotatable polarizerDiaphragmIris diaphragmFocus mechanismCoaxial coarse and fine focusing system with tension adjustmentFine focus precision2µmFocusing stroke25mmUpper limit stopUpper limit stop preset but adjustableFilter holderOn top of the illuminator with fixing capTransmitted illuminationKoehler Quartz halogen 6V/30W with intensity controlIllumination interchangeabilityHalogen/LED and LED color temperature interchangeabilityIllumination featuresMotic LightTracer: Light memory, sleep mode (auto on-off), nosepiece LED light intensity and mode indicatorTransformerInternalPower supply110-240V (CE)Other featuresUSB 2.0 for external camera powerDimensions LxWxH410x300x395mmNet weight10.4kgComparison of ModelsSpecificationPanthera TEC POL EPI (Binocular)Panthera TEC POL EPI (Digital)Panthera TEC POL EPI (Trinocular)Optical systemCCISCCISCCISObservation tubeBinocular head, Siedentopf typeBinocular head, Siedentopf type with built-in digital cameraTrinocular head, Siedentopf typeInterpupillary distance48-75mm48-75mm48-75mmEyepiecesWidefield UC-WF10X/22mm with diopter adjustmentWidefield UC-WF10X/22mm with diopter adjustmentWidefield UC-WF10X/22mm with diopter adjustmentIntermediate BodyEpi-illuminator LED with rotatable analyzer 360º, Bertrand lens, fixed polarizer and slot for compensatorsEpi-illuminator LED with rotatable analyzer 360º, Bertrand lens, fixed polarizer and slot for compensatorsEpi-illuminator LED with rotatable analyzer 360º, Bertrand lens, fixed polarizer and slot for compensatorsObjectives4X/0.1 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 60X/0.8/S (WD 0.35mm)4X/0.1 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 60X/0.8/S (WD 0.35mm)4X/0.1 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 60X/0.8/S (WD 0.35mm)StageCircular rotating 360º, lockableCircular rotating 360º, lockableCircular rotating 360º, lockableStage sizeØ160mmØ160mmØ160mmFocus mechanismCoaxial coarse and fine focusing system with tension adjustmentCoaxial coarse and fine focusing system with tension adjustmentCoaxial coarse and fine focusing system with tension adjustmentTransmitted illuminationKoehler Quartz halogen 6V/30W with intensity controlKoehler Quartz halogen 6V/30W with intensity controlKoehler Quartz halogen 6V/30W with intensity control.comparison-table tr td:nth-child(4) { background-color: #fffacd; }DownloadsTechnical Specification Download

Polyscience MX14P100-A11B 14L Polycarbonate Open Bath, MX (Ambient +10 to 85C), 120V, 60HzFeatures - (more) Large, universal icon and English display - On-screen prompts - Single-point calibration capability - Working temperatures from ambient +10° up to 150°C - DuraTop™ insulating, chemical-resistant top deck - Temperature stability of ±0.07°C - Controller displays internal bath temperature, set-point and more–all on one easy to read screen Three control buttons and plain-text on-screen prompts make the setup and operation of the MX Temperature Controller easy and straightforward. Redundant over-temperature protection, high and low temperature limits and alarms alert you instantly to conditions that fall outside normal operating parameters User-settable high-temperature safety provides over-temperature and low liquid level protection. Patented, integrated design protects pump and heater while simplifying cleaning and maintenance. PolyScience Circulating Bath with MX Temperature Controller. It is intended for the precise temperature control of suitable liquids in a reservoir. Extremely easy to use and maintain, it combines design innovation with highly intuitive operation to deliver convenient and versatile liquid temperature control for a wide range of applications. Click Here to View Product Video The Polyscience MX14P100-A11B 14L Polycarbonate Open Bath, MX (Ambient +10 to 85C), 120V, 60Hz is brand-new . Includes: Power Cord Operator's GuideManufacturer's Documentation Full 2 Year Parts and Labor Warranty Polyscience MX14P100-A11B 14L Polycarbonate Open Bath, MX (Ambient +10 to 85C), 120V, 60Hz SpecificationsKey SpecificationsDescription14 L Open Bath SystemController TypeMXDisplay3.25" LCDLanguages SupportedEnglishWorking Temperature Range CAmbient +10° to 85°Temperature Stability C±0.07°Temperature Calibration Capability1-pointWorking Access (L x W x D) (cm)31.4 x 15.6 x 20.3 cmPump TypePressureFlammability Class (DIN 12876-1)I (NFL) Part Number MX14P100-A11BMaximum Pressure (psi)2.3Maximum Pressure (bar)0.16Maximum Pressure Flow Rate (gpm)3.60Maximum Pressure Flow Rate (l/min)13.5Included HardwareFitting Kit for External ApplicationsHeater Wattage1100Electrical Requirements (VAC/Hz/Ph/A)120/60/1/10Regulatory ApprovalsETLComparison of ModelsSpecificationPolyscience MX06S135-A11B 6L Stainless Steel Open BathPolyscience MX08P100-A11B 8L Polycarbonate Open BathPolyscience MX10S135-A11B 10L Stainless Steel Open BathPolyscience MX14P100-A11B 14L Polycarbonate Open BathPolyscience MX17P100-A11B 17L Polycarbonate Open BathPolyscience MX20S135-A11B 20L Stainless Steel Open BathPolyscience MX23P100-A11B 23L Polycarbonate Open BathPolyscience MX28P100-A11B 28L Polycarbonate Open BathPolyscience MX28S135-A11B 28L Stainless Steel Open BathWorking Temperature Range (°C)Ambient +10° to 135°Ambient +10° to 85°Ambient +10° to 135°Ambient +10° to 85°Ambient +10° to 85°Ambient +10° to 135°Ambient +10° to 85°Ambient +10° to 85°Ambient +10° to 135°Temperature Stability (°C)±0.07°±0.07°±0.07°±0.07°±0.07°±0.07°±0.07°±0.07°±0.07°Working Access (L x W x D) (cm)10 x 11 x 15.2 cm10.5 x 15.6 x 20.3 cm9.9 x 25.5 x 15.2 cm31.4 x 15.6 x 20.3 cm31.4 x 15.6 x 20.3 cm26.4 x 22.8 x 15.2 cm31.4 x 15.6 x 20.3 cm31.5 x 30.5 x 20.3 cm25.7 x 21.4 x 20.3 cmVoltage (V)120V120V120V120V120V120V120V120V120VFrequency (Hz)60Hz60Hz60Hz60Hz60Hz60Hz60Hz60Hz60Hz.comparison-table tr td:nth-child(5) { background-color: #fffacd; }

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Powerful stirring for your lab reactions AREC 7 features state-of-the-art heating plate technology,  (more)designed by VELP, which guarantees temperature homogeneity, thermal efficiency and long-lasting heating performance. You can rely on the AREC 7 for demanding laboratory reactions, stirring volumes up to 15 liters (H2O), from 50 up to 1500 rpm, thanks to the powerful motor and magnetic coupling. The electronic control adapts the stirring speed to any variation in the viscosity of the medium. SAFETY AND EASE OF USE FOR LAB OPERATORS The AREC 7 stirrer with heating plate guarantees a superior level of safety and protection for laboratory operators, as it is entirely made of technopolymer and is equipped with an extremely resistant ceramic plate, ideal for high resistance to acids, bases and solvents . When the plate temperature is above 50°C and the heating function is not active, a safety message is displayed. The control panel is positioned at a safe distance from heat sources and the technopolymer structure is carefully designed so that accidental spills of liquids cannot reach the electronics. The extremely durable ceramic plate is easy to clean and resistant to acids, bases and solvents. Using a damp cloth, all residues will be easily removed. SAVE TIME AND SPACE WITH THE NEW CONTROL PANEL Thanks to the extremely bright and easy-to-read digital display, the temperature can be monitored constantly. Two new comfortable knobs: the one on the left for the temperature (up to 550°C), the one on the right for the stirring speed (up to 1500 rpm). The innovative low profile design for exceptional comfort above the bench and inside the lab hood. It is not possible to connect AREC 7 to the Cloud Ermes system.

Newport RS4000 H-Configuration Optical Table Assembly This item is being sold on behalf of a client. (more) It is surplus to requirements. This large optical table system consists of an assembly of 3 Newport RS4000 Metric tables configured in the form of an "H."It consists of 2 x 6 Meter Tables & 1 x Bridge Section 2 Meter Table - full dimensions listed below. Table Dimensions:- Long Tables (2): - Length: 6 metres - Width: 1.5 metres - Thickness: 30 cm - Bridge Section: - Length: 2 metres - Width: 1.5 metres - Total Assembled Dimensions (As shown in diagram): - Length: 6 meters - Width: 4.5 meters Please note that this sale is for the Optic Tables only, the supporting legs are not included. Collection available from Surrey, United Kingdom, but we may be able to arrange shipping for an additional cost. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

ELGA PURELAB Ultra GE Genetic MK2 Water Purifier Purification System This was removed from a univers (more)ity lab where it was surplus to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks. Max Pressure inlet - 0.7/10Max Pressure Working - 5.5/80 Comes with : 2 X ELGA Labpure S1 - Part No. LC1822 X ELGA Sanitisation Block - Part No. LA6981 X UV Filter1 X ELGA Ultrafiltration Cartridge - Part No. LC151

Powerbank ZR-04 is used for rechargeable power supply for balances and scale accessories. It uses fa (more)st charging technology. It allows long operating time without recharging and, thanks to the “Low Power” function, powering devices with low power consumption. The ZR-04 powerbank is made of high-quality components that ensure reliable operation. A display indicating the state of charge enhances ergonomics. Powerbank ZR-04 meets airline standards, which means that it can be carried on board an airplane as hand luggage. The device can simultaneously power the balance/ scale and charge the internal battery. The average power time of the balance/ scale is, depending on the product series, from 8 to as much as 24 hours.

Flat polygonal sheets - set (1 mg - 500 mg) F2-class mass standards represent an impressive level of (more) precision in mass measurement. Classified as metrology grade F2, they are recognized as top-quality tools suited for advanced applications where precision is a key element. F2 Class Mass Standards – Key Features Exceptional Measurement Precision - F2 class mass standards feature excellent measurement precision achieved through stringent standards for allowable deviation from actual weight. Stability under Dynamic Conditions - An important feature of F2-class mass standards is their ability to maintain measurement stability even under dynamic measurement conditions. They are designed to cope with a variety of factors that affect measurement precision. Calibration at the Highest Level - The calibration process of F2-class mass standards adheres to the most stringent norms and standards. This makes the standards of this class recognized as tools with the highest degree of accuracy, complying with international requirements. Use of Materials with Outstanding Properties - F2 class mass standards are often constructed from materials with outstanding physical properties. This ensures not only excellent precision, but also exceptional durability. The set includes: wooden box 12 mass standards 1 pair of tweezers 1 brush Material: nickel silver *The 1 mg, 2 mg and 5 mg mass standards are made of aluminum. Application 1. Scientific Research at the Highest Level In scientific research, especially in fields that require the utmost precision, such as nuclear physics or astrophysics, F2 class mass standards are indispensable. 2. Metrology Industry In metrology laboratories engaged in testing and maintaining the most advanced measurement standards, F2 class standards are indispensable working tools. 3. High-Precision Testing Laboratories In laboratories specializing in research requiring the highest precision, such as forensic laboratories and materials testing, F2 class mass standards are essential. 4. Aerospace Industry In the precision mass measurements required in the aerospace industry, F2 class standards provide reliability and excellence. F2 class mass standards are the symbol of the highest precision in the field of mass measurement. Their use is crucial in the most advanced fields of science, industry and research.

The UMA 2.5Y.F automatic weighing system has been designed to test mass changes of filters made of  (more)quartz glass fibre, glass fibre, teflon and teflon covered with glass fibre. Mass measurement is carried out with readability of 1 μg or 0.1 μg. The weighing system enables conditioning filters in accordance with PN-EN 14907 and PN-EN 12341 standards. Effective and Excellent Measurement The UMA 2.5Y.F automatic weighing system is a first-class solution for professional mass measurement. Dynamic control and correction of mass indications both ensure fast and stable weighing regardless of the weighed filter type. The UMA weighing systems, due to the elimination of the human factor, temperature changes and air drafts, guarantee excellent measurement repeatability. Effective Weighing Analysis Full automation of the weighing cycle, thanks to the elimination of the ‚human factor’, is a guarantee of measurement repeatability impossible to be obtained in case of manual weighing. Remote programming of measurement processes significantly increases operation efficiency. Dedicated Software The RMCS Filters software allows to manage time and comparison test plans of each filter or filter series. Summary reports and report components are defined by the system administrator. Metrological Control Periodically, correctness of weighing system operation is verified via a certified mass standard or a reference filter. Compact Design The UMA 2.5Y.F automatic weighing system can be easily adapted to any laboratory conditions. The device size facilitates its placing on the anti-vibration table of standard dimensions. Ambient Conditions Module The ambient conditions module is housed inside the bottom part of the weighing system. This results with a laminar air flow that does not disturb the ongoing filter mass measurement. The range of temperature and humidity changes is automatically forced in accordance with the values programmed via device terminal.