Benchmark IPD1196-MP 96 deep square well 2.0mL polyethylene toughened genomics plate

THB sensor THB sensor is a device measuring ambient conditions, it cooperates with: a computer (1 se (more)nsor via USB 2.0 port); direct cooperation, a weighing device (1 sensor via USB 2.0 port); direct cooperation, a THBR Box (up to 4 sensors connected to THBR Box via USB 2.0 port). The THB sensor is designed to measure parameters such as temperature, humidity, pressure, air density and vibrations level. Sensor registers level of permissible vibrations at the workstation, wherein the values of vibrations level are displayed within 0 - 100% range versus reference values in laboratory conditions. Values exceeding 100% threshold inform about potential occurrence of error greater than permissible error of mass measurement performed using weighing device. Each sensor has its own identification number that is assigned to measurements saved to the database. Ambient conditions can be monitored using: weighing instrument display website Windows OS application: THB Single or THB Multi Android application. On the basis of sent measurements, the THB Single or THB Multi software determines air temperature, humidity, pressure, density and permissible vibrations factor.

Thermo Scientific Microplate Carriers for TX-1000 Rotor, Cat. #: 75007303The Thermo Scientific Micro (more)plate Carriers for TX-1000 Rotor, Cat. #: 75007303 are for use with the Thermo Scientific TX-1000 Rotor. These adapters feature a capacity for 4 x 6mL Standard or 4 x 2mL Deep-Well Microplate. This is a four piece set, and the adapters are new in packaging. INCLUDED: The Thermo Scientific Microplate Carriers for TX-1000 Rotor, Cat. #: 75007303 includes: - Four 75007303 Microplate Carriers - Full 6 Month Parts and Labor Warranty Thermo Scientific Microplate Carriers for TX-1000 Rotor, Cat. #: 75007303 SpecificationsCapacity4 x 6mL Standard or 4 x 2 mL Deep-WellRotor CompatibilityThermo Scientific TX-1000 Rotors

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Thermo Haake A25 refrigerated circulating bath with SC150 controller. Capacity 12 L. Flow rate 17 L/ (more)min. LCD screen. Two levels of pump speed adjustment. Temperature range -25 °C to +100 °C. Stability ± 0.02 °C. Maximum pressure 300 mbar. Communications RS485, Ethernet/LAN, analogue I/O. Audible and visual alarm. Dimensions (LFA): external 483*273*711 mm; internal 184*204*173 mm; 36.1 kg. User manual. Improve the accuracy and efficiency of your experiments with the Thermo Haake ARCTIC A25 with SC150 controller, the ideal refrigerated circulating bath for laboratories that demand precision and reliability. With a temperature range of -25°C to 150°C and a capacity of 6 liters, this equipment provides exceptional thermal control and versatility in multiple applications. Its digital display and efficient circulation pump ensure even heat distribution, while advanced safety features offer peace of mind and protection. Optimize your processes and obtain accurate results with the Thermo Haake ARCTIC A25 with SC150 controller!

The newest line of Radwag Mass Comparators enables adjusting mass standards and weights according to (more) the OIML recommendations (R-111) from 1 mg to 5 kg for E1 class and lower. Mass comparators are used both for ensuring traceability of mass measurements, and verification of weights in accordance with the principles of legal metrology. RADWAG Mass Comparators have gained recognition among Accredited Calibration Laboratories in many countries. Mass comparator WAY 5Y.KO series similarly to other models, comprises two components. One of them holds the electronic module, and the other precise mechanical measuring system. The WAY 5Y.KO series comes standard with an aesthetic, large weighing chamber with glass anti-draft shield. All elements of the weighing chamber are manufactured from glass or metal to minimize the influence of electrostatic charges on weighing result. Mass comparator WAY 5Y.KO series features an intuitive menu supporting a user while operating the instrument.

Hersteller: Horiba Modell: Duetta Beschreibung: Duetta™ ist ein 3-in-1-Spektrofluorometer, das die F (more)unktionen von Fluoreszenz- und Absorptionsspektrometern gleichzeitig vereint. Dank des eingebauten Hochgeschwindigkeits-CCD-Detektors kann das Duetta ein komplettes Spektrum von 250 nm bis 1.100 nm in weniger als einer Sekunde aufnehmen und ist damit das schnellste Fluoreszenzspektrometer auf dem Markt. Kernmerkmale: - Drei-in-Eins-Fluoreszenz- und Absorptionsspektrometer - UV-Vis-NIR Fluoreszenzdetektion Wellenlängenbereich von 250 bis 1.100 nm - Vollständige 3-D-Fluoreszenz-EEM-Akquisition in weniger als einer Sekunde - Klassenbeste Fluoreszenz-Empfindlichkeitsspezifikation von 6.000:1 RMS für Wasser-Raman - Automatische Korrektur für primäre und sekundäre Innenfiltereffekte (IFE) - High Fidelity Molecular Fingerprinting mit der einzigartigen A-TEEM™ (Absorbance-Transmittance Excitation Emission Matrix) Technologie - Millisekunden-CCD-Detektion des gesamten Fluoreszenzspektrums Sonstige Daten: Erfassungsmodi: Absorptions- und Fluoreszenzspektrometer Fluoreszenz-Empfindlichkeit: Wasser-Raman SNR >6.000:1 RMS, 350 nm Anregung, 5 nm Schlitze Spektrale Erfassungsrate: 510.000 nm/min EEM-Akquisitionsrate: Bis zu 1 Sekunde (proben- und wellenlängenabhängig) A-TEEM-Akquisitionsrate: Bis zu 30 Sekunden (proben- und wellenlängenabhängig) Fluoreszenz-Detektor: CCD/Spektrograf Fluoreszenz-Detektorbereich: 250 bis 1.100 nm Fluoreszenzbandbreite: 1, 2, 3, 5, 10, 20 nm (Anregung und Emission) Lichtquelle: 75 W Xenon-Bogenlampe. Spezielle Kassette für Snap-in-Austausch Wellenlängenbereich Anregung/Absorption: 250 bis 1.000 nm Absorptionsdetektor: Silizium-Photodiode Absorptionsdetektorbereich: 250 bis 1.000 nm Absorptionsbandbreite: 1, 2, 3, 5, 10, 20 nm Absorptionsbereich: 0 bis 2 A Absorptionsgenauigkeit: +/- 0.02 A Wellenlängen-Genauigkeit: +/- 1 nm Computer-Anforderungen: Windows 10 oder 11 64-bit OS, Laptop oder PC mit mindestens 1 USB-Anschluss (mehr für zusätzliches Zubehör) Software: EzSpec™ Abmessungen: (B x T x H) 17 x 20,4 x 14,4 Zoll; 43,18 x 51,816 x 36,576 cm Gewicht: 45 Pfund; 20,4 kg Das hier angebotene Gerät/System wurde getestet und ist voll funktionsfähig und einsatzbereit.

This functional thermometer is ideal for simultaneously measuring indoor and outdoor temperatures. P (more)laced near the window, the sensor cable for measuring the outside temperature is simply led outside. The max. min. memory with manual reset allows you to observe the peak values over a self-selected period of time. The application possibilities of the measuring device with sensor cable are diverse and not only limited to the outside temperature. Thanks to the large measuring range, the waterproof sensor can also be used to check the temperature of refrigerators and freezers or to measure the water temperature in the aquarium. Measuring range temperature cable sensor: -50°C to 70°C Temperature measurement range outside: -50°C to 70°C Temperature indoor measuring range: -10°C to 50°C Cable length: approx. 290 cm Dimensions (LxWxH): 70 x 20 x 110 mm Weight: 90g

Print resolution: 203 dots/inch, 8 dots/mm or 300 dots/inch, 12 dots/mm Dot size (WxL): 203 dpi – 0. (more)110 x 0.132 mm, 300 dpi – 0.110 x 0.132 mm Maximum print width: 203 dpi – 108 mm, 300 dpi – 105.7 mm Bar code modulus: 203 dpi – 5 mil to 50 mil, 300 dpi – 3.3 mil to 33 mil Programmable constant print speeds: 51, 76, 102, 127 and 152 mm/s Media label length: Minimum (tear off) – 17.8 mm, Minimum (peel off) – 12.7 mm, Maximum – 991 mm Media label width: Minimum – 19 mm, Maximum – 114 mm Media total thickness (including liner, if any): Minimum – 0.076 mm, Maximum – 0.25 mm Media maximum roll outer diameter: 76 mm core – 203 mm, 25 mm core – 152 mm Media inter label gap: Minimum – 2 mm, Preferred – 3 mm, Maximum – 4 mm Media ticket/tag notch size (WxL): 6 x 3 mm Media hole diameter: 3.18 mm Media notch or hole position (centered from inner media edge): Minimum – 3.8 mm, Maximum – 57 mm Media black mark density: > 1.0 ODU Media maximum density: ≤ 0.5 ODU Ribbon width: Minimum – 51 mm, Maximum – 110 mm Ribbon standard lengths: 2:1 media to ribbon roll ratio – 300 m Ribbon core inside diameter: 25 mm Dimensions (HxWxD): 277 x 242 x 432 mm Weight: 9.1 kg