Benchmark D1133-G Garnet shards, bulk, acid washed, 250g bottle

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Max Temperature: 300°C Temperature Accuracy: Ambient temp….300°C: ±0.5°C & 200 … 300°C: ±0.5° to ±0. (more)8°C (linear increase) Temperature Resolution: 0.1°C Heat-Up Time: 50 to 300°C in 3 minutes (0.1 to 10°C per minute)

Labconco Heated Product Shelf Chamber, 3 shelvesFor use with any FreeZone Freeze Dryer manufactured  (more)afterJuly 2017. Chambers allow for drying of bulk samples, or drying of serumbottles, vials or microplates. The 10" diameter shelves are wireless andremovable so that they may be placed in a freezer for pre-freezing. Each shelfis height adjustable to accommodate a broad variety of sample sizes. Chamberconnects to a FreeZone Freeze Dryer for control and recording of shelftemperature from the Lyo-Works display. Temperature may be set from -20C (-4°F) to +60C (+140F). Each Chamber includes a 12" diameter clear acryliccylinder, vacuum release valve, cap for vacuum port and 8" diameteropening to collector on bottom of chamber. Will fit 10.12” or 14.0” diametercondensers. Short Chambers include three shelves and three temperature probes.Tall Chambers include five shelves and five temperature probes. INCLUDED: The Labconco 780801000 Heated Product Shelf Chamber, 3 shelves, 115V, 60Hz includes: - Communication Cable - Power Cable - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Julabo CORIO CD-450F Refrigerated Circulator with Synthetic Refrigerant (R449A), 115V/60Hz Refrigera (more)nt R449A Working Temperature Range -30°C - 150°C Cooling Capacity 450W (at 20°C) Features - Models for internal and external applications - Bright, white, easy to read display - Very quiet - Easy pump change-over (internal and external circulation) - External pump connections (M16x1) - USB connection - Space-saving cooling coil design yields more usable space in the bath tank - Bath lid and drain tap included - Removable ventilation grid - Refrigeration unit without side vents - Class III (FL) according to DIN 12876-1 CORIO™ CD-450F refrigerated/heating circulator with an operating range of -30…+150 °C and ±0.03 °C stability. Suitable for temperature applications with cirulation to an external apparatus or immersing a device in the bath tank. The CORIO™ CD circulator incorporates easy change-over for control of fluid circulation internally or externally. The CORIO CD includes USB-B port for PC communication and a USB-A port for datalogging. Unit fittings: M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. 450W cooling power at 20 °C with 70W at -30 °C. Options for heating power (1kW or 2kW) and refrigerant (R290 natural refrigerant or R449A synthetic refrigerant).Class III (FL) according to DIN 12876-1.INCLUDED: The Julabo CORIO CD-450F Refrigerated Circulator with Synthetic Refrigerant (R449A), 115V/60Hz includes: - 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) - Power Cord - Two Year Manufacturer's Warranty

Heating thermostat from 20 to 200°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Grafico delle prestazioni di riscaldamento dei termostati di immersione ECO Silver con vasca in acciaio inox. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Cooling coil connections 2 - Pump connection: outflow and return (as standard only with E 4 S and ET 15 S) 3 - Four feet 1 - Mains connecting lead 2 - Rating label 3 - Bath draining tap 4 - Bath drain point

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This FluidX Xtp-1152 was removed from a university lab where it was surplus to requirements. This it (more)em powers up and is in good cosmetic condition. It has not been tested further.

Eppendorf 8 x 15ml Adapters, Cat. # 5804783000 New in box Eppendorf 8 x 15ml Adapters, Cat. # 580478 (more)3000 for the S-4-72 Rotor. This is a 2 piece set, and the adapters are new in the packaging. The Eppendorf 8 x 15ml Adapters, Cat. # 5804783000 are used with the Eppendorf 5804/R and 5810/R Centrifuges. The Eppendorf 8 x 15ml Adapters, Cat. # 5804783000 arediscounted, brand-new, and includes a Full 6 Month Parts and Labor Warranty.

Crest P360D/HF-132 Digital Ultrasonic Cleaner w/ Power ControlFeatures - Ceramically enhanced transd (more)ucer technology with industrial bonded assembly - Homogenous sound field, energy distribution, and prevention of standing waves using frequency sweeping - Adjustable cleaning time or ability to set for continuous operation - Adjustable bath temperature between 20°C to 80°C - "D" models feature an adjustable ultrasonic power in nine steps, along with a Degas function for consistent sample prep applications - Deep-drawn stainless steel cleaning tank with rounded corners for easy cleaning - Intrinsically safe heater with dry-run protection - Drain valve assembly available for tank capacities of 2.5 gallons or higher 45 kHz and 132 kHz frequencies provide precision cleaning and rinsing options, with 132 kHz available for enhanced sample preparation performance. All models feature digital display of temperature and time, with "D" models featuring digital display of the ultrasonic power level. Efficiently removes flux from PCB's, fats, paints, surface rust, lime, oils, adhesives, polish residues, chemical residues, dust, and much more. The Crest P360D/HF-132Ultrasonic Cleaner with Power Control combines advanced technology with user-friendly features, making it an essential tool for precision cleaning applications. Featuring ceramically enhanced transducer technology and homogenous sound field distribution, it operates at a frequency of 132 kHz, ensuring thorough cleaning and enhanced sample preparation capabilities. With adjustable cleaning time and bath temperature ranging from 20°C to 80°C, it offers versatility for various cleaning needs. The "D" models include nine-step ultrasonic power adjustment and a Degas function, optimizing cleaning performance. Its deep-drawn stainless-steel tank with rounded corners facilitates easy cleaning, while an intrinsically safe heater with dry-run protection ensures safe operation. Ideal for removing flux from PCBs, oils, paints, and other contaminants, the Crest P360D/HF-132 guarantees reliable performance backed by a 2-year manufacturer's warranty.INCLUDED: The Crest P360D/HF-132 Digital Ultrasonic Cleaner w/ Power Control includes: - Tank Cover - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty