Benchmark D1033-28 Prefilled 2.0ml tubes, Stainless Steel, 2.8mm Acid Washed, 50pk

Temp. range 5 – 40°C LCD 5 digits Altitude up to 2000m Max relative humidity 80% Including replac (more)ement marker tips

Used in Beckman Coulter J2, J6, and Avanti J Series Centrifuges Maximum speed: 10000 rpm Maximum sol (more)ution density: 1.2 g/mL Maximum allowable imbalance of opposing loads: 10 grams Capacity: 6x 500 mL Rotor material: aluminum Weight: 19 kg

Miele Professional G 7883 Lab Glassware Washer The unit did not power up in testing. It is sold for  (more)spares/repairs. It is in good cosmetic condition with minor marks.

Motic Complete Epi-Fluorescence Attachment for BA410E The Motic Complete Epi-Fluorescence Attachment (more) for BA410E is designed to convert your BA410E microscope for fluorescence microscopy. This system connects easily to your BA410E and accommodates three filter cassettes for excitation observation. Fluorescence microscopy uses an optical phenomenon where light absorbed by a material creates molecular excitation, causing the material to re-emit light at a different wavelength. Epi-illuminators in fluorescence microscopy are adapted from vertical illuminators used in reflected light observation. The light source emits radiation that first passes through an exciting filter and then hits a short-pass filter (dichroic beam splitter). This reflected radiation enters the objective, which also acts as a condenser. The objective focuses the exciting radiation onto the object field. The emitted fluorescent light is then collected by the same objective, directed back to the short-pass filter, and finally passes through the barrier filter into the eyepiece for observation. INCLUDED: The Motic Complete Epi-Fluorescence Attachment for BA410E includes: - Epi-Fluorescence Attachment with Filter Cassette - Mercury Lamp 100W - Lamphouse HBO 100W, Collector Lens and Mercury Lamp Socket - Starter Unit HBO 100W - Lamp Centering Tool - Power Cord - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

ZWIEBEL calibration weight 1kg class M1 INOX Laboratory calibration weight in stainless steel Brand: (more) ZWIEBEL Weight: 1 kg / 1000g Type / class: M1 maximum permissible error: ± 50mg LZ Weight checked on a precision balance at 0.01g (10mg) - see photo In its plastic case uncalibrated weight

The HI 8427 is a portable pH/mV simulator designed specifically for calibrating pH and mV (ORP) mete (more)rs. Two calibration ranges are provided from 0 to 14 pH with temperature compensation and from -1900 to 1900 mV. A high impedance button and leakage LED are also provided to verify if the connection cable and pH meter insulation are in perfect condition. The instrument has a BNC output connector. Range pH: 0 to 14 in steps of 0, 2, 4, 7, 10, 12, 14 Range mV: -1900 to 1900 in steps of -1900, -350, 350, 1900 Accuracy pH: ±0.1 Accuracy mV: ±2 Temperature compensation: 0°C to 50°C High impedance test: 1010 Ω Power supply: 9V battery Battery life: 100 hours of continuous Dimensions (DxWxH): 180 x 80 x 30 mm Weight: 300 g

Applied Biosystems 7500 Fast Real-Time PCR System Lab This system was removed from a university lab, (more) where it was surplus to requirements. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Also includes the following: - Real-Time PCR Systems - Chemistry Guide - Applied Biosystems Site Preparation Guide - Applied Biosystems Getting Started Guide - Allelic Discrimination Guide - 7500 Fast Real-Time Software V1.4 - MicroAmp Adhesive Film

Waterproof stainless steel platform We provide you with waterproof stainless steel platforms with re (more)adability [d] from 1 g to 100 g and maximum capacity [Max] from 3 kg to 300 kg. The platforms are rectangular in 150 x 200 mm, 250 x 300 mm or 400 x 600 mm or square in 410 x 410 mm, 800 x 800 mm, 500 x 500 mm, 600 x 600 mm or 800 x 800 mm. Use the potential Our platforms can work with one of six weighing terminals to choose from: PUE H315, PUE C315, PUE 7.1, PUE HX7, PUE HY10 and PUE 5. The power of steel The use of stainless steel for both the pan and the frame guarantees you a long life for the platform. Fearless of its contact with moist objects or accidental splashes. The entire stainless steel construction translates into a high degree of protection for these platforms: IP 68.

IKA RC 5 basic Recirculating Chiller, basic Working Temp. -30°C to Room Temp. Pump Pressure Max. 0.6 (more)1 bar Flow Rate Max. 31 l/min Features - Speed-controlled refrigeration system with 1400 W cooling capacity (@20°C) - Natural thermofluid R290 - Designed for cooling applications up to -30°C - RT - Extended operating temperature range until 80°C - Excellent temperature stability of about ± 0,1K (@-10°C) - Speed-controlled pump made of PEEK: (0,6 bar; 31l/min) - Digital level indicator This energy-efficient chiller is operated with an eco-friendly refrigerant and reaches a high power density. This results in a comparatively small working space in the lab. The speed-controlled PEEK pump allows an indirect, continuous adjustment of the maximum pressure and flow rate. Due to its excellent temperature stability of about ± 0,1 K, the RC 5 can handle even sophisticated applications. The isolated, high-quality 7l bath has an integrated hopper and drain valve, ensuring a safe and clean handling of the thermofluid. A hose can be connected to empty the bath in order to avoid direct contact with the thermofluid. The easy-to-open front flap allows an easy cleaning of the cooling unit’s air filter.INCLUDED: The IKA RC 5 basic Recirculating Chiller, basic includes: - Hose olive NW 8 (2 pcs.) - Hose olive NW 12 (2 pcs.) - USB Cable - USB A to Micro-B, 2 m - Power Cord - Manufacturer's Documentation - 2 Year Manufacturer's Warranty