Benchmark D1032-SK Prefilled - Triple-Pure Starter Kit, 10 each of 0.1, 0.5, 1.0, 1.5 and 3.0mm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

PT0443 Cable is used to connect the 5Y series balance or the PUE CY10 terminal to a computer. Its st (more)andard length is 1,8 m. Optionally, the cable is used to connect the 5Y series balance or the PUE CY10 terminal to: AS X2 and AS R series balances PS X2 i PS R series balances PM C32 series balances WLC and WTC series balances, and C315 series scales MAS and MPS series weighing modules

Labconco FreeZone Stoppering Tray Dryer with 6-Port Manifold FreeZone Stoppering Tray Dryers lyophi (more)lize moderate to largeloads of vials or serum bottles and stopper them under vacuum. They offertemperature control from -40 to +40C. Options include a 6-port manifold,isolation valve and sample trays. A pneumatic mechanism stoppers containers undervacuum on three large adjustable processing shelves, 16.5” x 12” each. AnHCFC/CFC-free refrigeration system and electric heater cool and heat fluidmedium that is circulated through the shelves to maintain shelf temperatureswithin ±1C. Lyo-Works™ OS lets the user set up to 30 programs, with up to 16steps each; record, chart and store data; and receive email alerts. The traydryer connects to a FreeZone Console Freeze Dryer that provides a real timedisplay of the tray dryer’s parameters on a large capacitive touch screen.Features Three 16.5 x 12 in. temperature-controlled (±1C), adjustable shelves with sample temperature sensors Chamber pre-freezes samples to save time and money by eliminating need for separate freezer and product transfer Up to 594 sq. inches of shelf space Circulating fluid in shelves ranges from -40 and +40C 1/8 in. OD backfill port introduces sterile air or inert gas from outside source to chamber, protecting samples from atmospheric moisture and contaminants Lyo-Works™ OS provides real time display of freeze dryer and tray dryer parameters on 5 in. full color, capacitive touch screen on connected FreeZone 6, 12, or 18L Freeze Dryer (sold separately) Microprocessor-based controller allows up to 30 different temperature programs to be stored and repeated, each using up to 16 different steps Display provides navigation to manual or program mode, probe temperatures, vacuum in mBar, Torr or Pa, step of program in progress, time remaining in present step, and end of program, as well as alarms Optional 6-Port Tray Dryer Manifold accommodates either 1/2 in. or 3/4 in. flask adapters and connect to flasks and other glassware Optional built-in isolation valve separates Stoppering Tray Dryer from freeze dryer to shorten time necessary to reestablish working vacuum levels and to provide means for determining end point Freeze dryer, vacuum pump with displacement of at least 163L/minute, and freeze dry glassware (if not bulk freeze drying) are required (not included) INCLUDED: The Labconco 794801100 FreeZone Stoppering Tray Dryer with 6-Port Manifold 115V, 60Hz includes: - Sample Temp Sensor x 3 - Communication Cable - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

AREX 6 by Velp Scientifica The central button activates the heating of the plate only after pressing (more) it, avoiding involuntary switching on. The safety icon informs the operator that the plate is at temperature, preventing possible burns. It will remain illuminated until the temperature is below 50°C. The knobs allow precise speed and temperature regulation with new ergonomics and greater sensitivity. CerAlTop™, High Resistance The CerAlTop™ plate, made of aluminum alloy covered with a ceramic layer, guarantees a homogeneous and fast heat transfer over the entire surface. Furthermore, the thin ceramic layer protects the straightener from scratches and chemicals. UNPRECEDENTED PERFORMANCE The brushless motor allows you to shake up to 20 liters at an adjustable speed from 30 to 1700 rpm. Thanks to the SpeedServo™ system, the speed is kept constant even when the viscosity varies. The Alnico magnet guarantees homogeneous agitation, even in the peripheral areas of the plate and a powerful magnetic coupling between motor and stir bar, a very important aspect when using accessories. MAXIMUM INSTRUMENT PROTECTION AREX 6 is an IP42 product designed to guarantee years of use and resistance in the laboratory. The structure and materials protect the internal parts of the instrument from possible damage. AREX 6 is guaranteed for 3 years. The silicone cover ensures further protection of the instrument from possible spills or splashes. Digital thermoregulation with VTF By connecting VTF digital thermoregulators, your AREX 6 transforms into a superior tool, with a built-in timer to schedule activities. The thermoregulator is ideal for multiple applications and meets the most demanding requirements in terms of precision, reliability and flexibility of use thanks to the innovative FUZZY LOGIC Technology. Automatically adapts thermoregulation to various factors such as power, load and heat dispersion. The VTF guarantees premium performance in terms of temperature control: it allows better alignment with the set temperature (with an accuracy of ± 0.5 °C.) and less initial 'overshoot' (initial discrepancy compared to the set temperature). Furthermore, VTF is equipped with a system to simplify installation on the support rod and facilitate positioning of the Pt100 probe in the most commonly used containers. The two clamps allow height adjustment while a sliding clamp allows horizontal adjustment. ACCESSORIES OIL BATH AND HEATING MANTELS REPLACED WITH SPHERICAL CAPS The new Spherical Caps are the perfect solution for replacing oil baths and heating mantles. Furthermore, they adapt perfectly to both the 135 mm plate diameter and the shape of the tubes allowing a fast heat transfer from the plate to the tube. To increase protection and reduce thermal dispersion, VELP has designed the new PTFE Covers. GREATER VERSATILITY The MultiAlublock™ and the new MonoAlublock™ made of aluminium, are ideal for carrying out numerous stirring and heating analyses, reducing time and space in the laboratory. - MonoAlublock™ are the ideal solution for all those applications that require analysis in tubes of the same size. - MultiAlublock™ are modular and of different types to support various tube sizes. Thanks to their modularity, it is possible to choose the mix that best suits your needs

VortaMix Mini Vortexer green V1000 Argos Technologies New equipment in its original packaging Mini g (more)reen vortex reference V1000G Speed: 3,000 rpm Weight: 0.55 kg Dimensions: 96 x 85 mm Ambient temperature range: 5...40 °C

Mackey Bowley Diffusion Bonder, Cheltenham Induction Heating & Edwards E2M80. The system was rem (more)oved from a University Lab as surplus to requirements. This system powers up and is in good cosmetic condition, we are unable to test it further at our facility. Mackey Bowley Diffusion Bonder.Serial No. S9638/91Chamber Dimensions: L 58cm x W 38cm x H 38cm.Bed Dimensions: L 80cm x W50cm.Fitted with: Oerlikon Leybold Vacuum Thermvac. Type: TTR91. Serial No. 230035.Edwards Speedivalve.Edwards Speedivac Oil Defussion Pump. Model: 403A. Serial No. 1981.Eurotherm Controller Type 815 & 818 Installation Manual. Stenhoj Hydraulik 60 Ton.Type: 500414.Serial No. 63153.Model Year: 1991. Cheltenham Induction Heating Ltd.Type: TRI 12.Serial No. TRI2017. Instron Control Panel.Model: 1342.Serial No. H2003.Fitted with: Edwards Pirani 11 & Display One Single Channel Vacuum Display.Display One Single Channel Vacuum Display Manual. Edwards High Vacuum Pump.Model: E2M 80.Serial No. 995.Comes with: Edwards Backing Roughing Valve. Model: BRV25PK. Serial No. 02011 & Instruction Manual.

Applied Biosystems MDS SCIEX 3200 Q TRAP LC/MS/MS System with Peak Scientific Nitrogen Generator Thi (more)s system was removed from a university lab where it was surplus to requirements. The system is in very good cosmetic condition. It powered on, with the 3200 Q Trap and nitrogen generator functioning as expected. The Varian vacuum pump is also in good working order, no further testing was carried out. The previous client stated that this system was in full working order prior to removal. The system comprises: - Applied Biosystems MDS SCIEX 3200 Q TRAP LC/MS/MS - Assembly No.: 1007440 - Serial No.: AF012360607 - Peak Scientific Instruments Nitrogen Generator - Model No.: NM20ZA - Serial No.: J06-06-06 - Running hours: 13,096 - Varian DS602 Vacuum Pump - Model: 949-9335S001 - Serial No.: 238954 - Fitted with oil mist filter EMF20 Code A46229000 - 2 x Sciex power supply units (Assembly No. 014179, Serial Nos. 15470210, 120985175) - 2 x Honeywell 9" black and white monitors (Model HMM9, Serial Nos. H321000214, H321000065) - Lenovo MS PRO PC - Type 2561 - Serial No.: ES10392192 - Loaded with Applied Biosystems Analyst v1.4.2, National Instruments Measurement & Automation Explorer v4.2.1, Chromeleon 6.8, and 3200 QTrap software - Dell Monitor - Serial No.: CN-OUW191-71618-812-ALAB - Lenovo wireless keyboard and mouse - Serial No.: 201209008012 Included Manuals: - 3200 QTRAP Tuning, Calibrating, and Optimising Guide - Analyst Software Tutorial - API Safety Practice Manual Additional accessories: - 1 x MonoSpray II assembly (Part No. 1014666, Serial No. 010158072606) - 4 x brackets (Part No. 016159A) - 4 x 16mm plastic tubing Y-connectors (Part No. 419-7271) - 60 x swabs (approx) - 8 x mixed packets of small O-rings and micro bore tube end connectors - 5 x Pico Tip Emitters (Stock No. FS150-20-10-D-S) - 1 x SGE Analytical 500nl syringe - 1 x Pressure Sensor MPL-503 - 7 x Pico Tips (Nos. 027459, 025388, 025388, 025392 [x4]) - 3 x plastic hose coils for nitrogen - 1 x 10-litre Nalgene bottle with 3-port top - 1 x 5-litre Nalgene bottle with SVC pressure valve (Part No. LVA30-03F-C4)

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

PS.R2 series balances represent a new standard of precision balances. They feature a new, readable L (more)CD display which allows a clearer presentation of the weighing result. Besides, the display has a new text information line allowing to show additional messages and data, e.g. product name or tare value. Communication interfaces New PS.R2 balances, like previously designed PS series balances, have pans in two possible dimensions: 128x128 mm or 195x195 mm balances with a smaller pan have a draft shield. The balance precision and the measurement accuracy is assured by automatic internal adjustment, which takes into consideration temperature changes and time flow. PS.R2 balances feature several communication interfaces: 2 x RS 232, type A USB, type B USB and optional Wireless Connection. The balance may cooperate with computer by means of USB interface supposing a supplementary software has been installed (respective driver). The said driver may be downloaded from RADWAG website – SOFTWARE link or SUPPORT section. The housing is made of plastic, and the pan is made of stainless steel. The balances have a possibility to weigh products out of the pan (under-pan weighing) - the load hangs under the pan. Databases in R Series Balances The information system is based on 5 databases, which allows for several users to work with several products databases, and the registered weighing results can be subject to further analysis. The data is registered in 5 databases: users (up to 10 users), products (up to 1000 products), weighments (up to 5000 weighments), tares (up to 100 tares), ALIBI memory (up to 100 000 weighments). Quick access to information There is two directions data exchange within the system thanks to a quick USB interface. New balances allow to import and export databases using USB pen drives. Direct access to functions and databases is possible from the level of keyboard. Database - a direct access to databasis Function - a direct access to the basic functions F1 do F4 - programmable function and navigation keys on the menu ALIBI memory The used ALIBI memory is a data secure area and allows to record up to 100 000 weighment records. It ensures security of constant data register in the long time period. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.