Benchmark D1031-10 Prefilled 2.0ml tubes, Silica (Glass) Beads, 1.0mm Acid Washed, 50pk

Eppendorf 4 x 9-15ml Adapters, Cat. # 022639129 New in box Eppendorf 4 x 9-15ml adapters (Cat. # 022 (more)639129) for round 85ml buckets with the A-4-38 rotor. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 4 x 9-15ml Adapters, Cat. # 022639129 includes: - Full 6 Month Parts and Labor Warranty

When you require the ultimate in water purity, PURELAB Chorus 1 provides the perfect solution. Consi (more)stently delivering water purity of 18.2 MΩ.cm (Type I+/I) and underpinned by the advanced PureSure deionization system, the PURELAB Chorus 1 enables you to focus on attaining accurate results while ensuring an uninterrupted workflow. Advanced PureSure Deionization – Eliminates trace ions that leach into your water and provides advanced warning to change the purification packs. Fully Recirculating –  Ensuring microbial purity and guaranteeing pure water at the point-of-use. Real-time TOC Monitoring – Provides complete confidence in organic purity. Integrated Filtration – Ultrafiltration or microfiltration filters out endotoxins, proteins, nucleases, and particulates. Full Spectrum UV Treatment Dispense Flowrate Up to 2.0 l/min Inorganics (at 25°C): 18.2 MΩ.cm Total organic carbon (TOC): 1 – 3 ppb Bacteria: <0.001 CFU/ml Bacterial Endotoxin: <0.001 EU/ml pH: Effectively neutral Particles: < 0.05 µm RNase: <1 pg/ml DNase: <5 pg/ml Purification pack capacity: Liters to 18.2 MΩ.cm = 94,100/(µS/cm + (2.3 x ppm CO2)) Source – originally from potable supply, then pretreated: Preferably RO produced by PURELAB Chorus 3 or filtered service deionization (SDI) or distilled. Fouling index (max): 1 (5 – 10 micron membrane prefilter is recommended for all non-RO feeds Service deionization (SDI) – MΩ.cm: 1 MΩ.cm minimum resistivity at exhaustion Reverse Osmosis (RO) – µS/cm: Recommended <30 µS/cm Free Chlorine: 0.05 ppm max TOC: <50 ppb max (RO feed) Carbon dioxide: 30 ppm (max recommended) Silica: 2 ppm (max recommended) Particulates: Filtration down to 5 – 10 micron advisable to protect internal and/or point of use filters Temperature: 1 – 35°C (Recommend 10 – 15°C) Flowrate (maximum requirement): 130 l/hr (34 USG) Drain requirements: Up to 2 l/min (0.5 USG) Feedwater pressure: 0.7 bar (10 psi) maximum; 0.07 bar (1 psi) minimum Dimensions (HxWxD): 435 x 375 x 340 mm Weight: 19 kg Excluding new filters

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Labconco 700611000 FreeZone 6L -50C Complete Freeze Dryer System Features - Patented moisture sensor (more)protects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Bundle includes a multiport drying chamber comprised of 304 stainless steel. Drying Chambers provide a means to attach a flask to your freeze dryer or contain samples in bulk. Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. The included Edwards RV rotary vane pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. The Labconco FreeZone 6L -50 C Complete Freeze Dryer System includes the Labconco 700611000 FreeZone 6L -50C Console Freeze Dryer with stainless steel coil and collector, Labconco 7522800 12-Port Drying Chamber, and an Edwards RV8 Vacuum Pump. The Labconco 700611000 FreeZone 6L -50C Console Freeze Dryer with stainless steel coil and collector is designed for lyophilizing moderate to large sample loads or numerous small container batches. The console features a front viewing window, interior space for a vacuum pump, and accommodation for a large tray dryer such as the FreeZone Stoppering Tray Dryers (pump and tray dryer sold separately). These models offer the broadest range of built-in options including a shell freezer. The upright stainless steel collector coil holds 6 liters of ice before defrosting. A single 3/4 hp HCFC/CFC-free refrigeration system cools the collector to -50° C (-58F), suitable for aqueous samples. The Labconco 7522800 12-Port Drying chamber includes 12 neoprene valves with plastic knobs that accommodate both 1/2" and 3/4" adapters for connection of flasks, a 1/2" thick arcylic lid with neoprene gasket, and one latching pin. Made of type 304 stainless steel. It is compatible with FreeZone 1, 2.5, 4.5, 6, 8, 12 or 18 Liter Freeze Dryers. The Edwards RV8 rotary vane pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. INCLUDED: The Labconco FreeZone 6L -50C Complete Freeze Dryer System includes: - Labconco 700611000 FreeZone 6L -50°C Console Freeze Dryer with Stainless Steel Coil and Collector - Labconco 7522800 12-Port Drying Chamber - Edwards RV5 Vacuum Pump - All Vacuum Tubing - Edwards EMF10 Mist Filter - Pump Oil - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Benchmark TubeRoller with 5 Rollers Speed Fixed 38 RPM Tilt Angle ±5° Motion Simultaneous roll an (more)d tilt Features - Constant speed: Fixed at 38 RPM. - Tilt angle: ±5° for thorough mixing. - Simultaneous roll and tilt motion. - Accommodates 8mm to 200mm diameter vessels. - Dimensions: 18 x 7 x 3.5 in (45 x 18 x 9 cm). - Roller dimensions: 12 x 12.5 in (30.5 x 32 cm). - Optimal for Vacutainers, bottles, and tubes. Your browser does not support the video tag. Benchmark TubeRollers are designed for the gentle, thorough mixing of a variety of containers, including Vacutainers, bottles, test tubes, centrifuge tubes and roller bottles. This TubeRoller operates at a constant 38rpm, chosen as the optimum speed for the broadest range of mixing requirements. As the roller mechanism rotates through each complete revolution, the right side of each roller is gently elevated about 0.5 in (13mm) and returns to the horizontal starting position. This additional, gentle up/down motion provides a “wave” effect and guarantees that the entire sample is subjected to complete, thorough mixing, end to end. This built in tilt feature provides a level of homogeneous mixing uniformity that can not be matched by any stationary roller apparatus. From blood collection tubes to roller bottles, Benchmark TubeRollers are the ideal choice for research, clinical laboratories and doctors’ offices.INCLUDED: The Benchmark TubeRoller with 5 Rollers includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Head: Double Binocular Eyepiece: Zeiss Kpl 10x/18 Objectives: 2.5x/0.08, 10x/0.22, 40x/0.65, 100x/1. (more)25 Oil Final magnifications: 25x, 100x, 400x, 1000x Nosepiece: Quadruple Focusing: Coaxial coarse and fine control knobs Illuminator: 12V Halogen illuminator