Benchmark C1005-T5-LOCK CapLock Clip, with breakaway lifting tabs, bag of 20

USBECK Aluminum Spindle Lift 20 x 20 cm Lifting Stand, Laboratory Lifting Table Tabletop dimensions: (more) 200 x 200 mm With traces of wear

Temperature range: ambient +5ºC to 150ºC Setting range: 15°C to 150°C Temperature stability (at 37°C (more)): ±0.1ºC Temperature uniformity within the block (at 37°C): ±0.1ºC Temperature uniformity across similar blocks (at 37°C): ±0.2ºC Display resolution: 1ºC Heat-up rate (ambient to max): 40 min Equipped with a heating block for 24 x 1.5 mL Eppendorf tubes. Dimensions (WxDxH): 205 x 180 x 122 mm Weight: 3.6 kg

Labconco 1200ml Complete Fast-Freeze FlaskCompleteFlask consists of 7543000 Flask Bottom, 7544400 Fl (more)ask Top and a supply offilter paper.Fast-FreezeFlasks attach with adapters to valve ports on Labconco Drying Chambers andManifolds. They are available in clear or amber-colored glass. A completeFast-Freeze Flask consists of a rubber top, glass bottom and a supply of filterpaper.Tops, bottomsand filter paper are available separately as replacement components. Adaptersare available in borosilicate glass or stainless steel. Fast-Freeze Flasks andAdapters are compatible with any brand freeze dryer that has 1/2" or3/4" diameter valve ports.Glass flaskswithstand maximum temperature of 490º C. Flask toppers withstand a maximumtemperature of 450º C.INCLUDED: The Labconco 7541000 1200ml Complete Fast-Freeze Flask includes: - Flask Bottom & Top - Supply of Filter Paper - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco 600ml Complete Fast-Freeze FlaskComplete Flask consists of 7542800Flask Bottom, 7544400 Fla (more)sk Top and a supply of filter paper.Fast-Freeze Flasks attach withadapters to valve ports on Labconco Drying Chambers and Manifolds. They areavailable in clear or amber-colored glass. A complete Fast-Freeze Flaskconsists of a rubber top, glass bottom and a supply of filter paper.Tops, bottoms and filter paper areavailable separately as replacement components. Adapters are available inborosilicate glass or stainless steel. Fast-Freeze Flasks and Adapters arecompatible with any brand freeze dryer that has 1/2" or 3/4" diametervalve ports.Glass flasks withstand maximumtemperature of 490º C. Flask toppers withstand a maximum temperature of450º C.INCLUDED: The Labconco 7540800 600ml Complete Fast-Freeze Flask includes: - Flask Bottom & Top - Supply of Filter Paper - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Accuris PR2000-N-25BLK qMAX Green, No ROX, 2500 reactions (1x25ml) Supplied as a ready-to-use 2X mas (more)ter mix, qMax Green has been engineered for high sensitivity, fact cycling and excellent reproducibility. Accuris Hot Start Polymerase provides accurate PCR of a variety of templates including low copy number and difficult sequences, while the proprietary qMax Green intercalating dye exhibits higher fluorescence and lower PCR inhibition than other popular green dyes.These two components are supported by a specially formulated buffer with an exacting combination of salts, PCR enhancers, stabilizers and pH that results in earlier Ct values and a high specificity across a broad dynamic range. An inert blue dye is also mixed into the qMAX Green to allow easy visualization during pipetting. INCLUDED: The Accuris PR1001-HS-1000 Hot Start Taq Master Mix, 2X Conc., 1000 Reactions includes: - Accuris qMAX™ Green qPCR mix with blue tracking dye, No ROX, 2500 reactions - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Laboratory balance DENVER INSTRUMENT TR-64 ​​61g / 0.1mg Model: Precision balance TR64 Weighing capa (more)city: 61g Readability: 0.1 mg (0.0001g) Plate diameter: Ø 9 cm Capacity resolution: 61 g x 0.1 mg Linearity: 0.2 mg Weight: 6.6kg Tested In good working order Warning, in poor aesthetic condition. A lot of rust, missing a side glass and the 2nd glass no longer slides, but the weighing works correctly

This was removed from a university lab where it was surplus plus to requirements. All units power up (more) but have not been tested further. It is in reasonably good cosmetic condition with minor marks from use. Included are; -Dolomite Mitos P-Pump-Dolomite Mitos Sensor Interface-Dolomite Mitos Flow Rate Sensor P-Pump model number- 3200176_5P-Pump serial number- 4901379 Sensor serial number- 1600878

Memmert ICH750 Stability Climate Chamber 749L, 115V Temperature Range -10°C to 60°C w/o Humidity (+ (more)10°C to 60°C w/ Humidity) Humidity Control 10 to 80% RH Chamber Volume 749L (26.5 cu. ft.) Features - Superior temperature and humidity homogeneity for reliable stability testing - Complies with international standards like ICH, WHO, EMA, ASEAN, GMP, GLP, GCCP - Active humidification and dehumidification system for precise control - Large-area air jacket on four sides ensures effective thermal transfer - Hermetically sealed interior for efficient water usage once setpoints are reached - Dual high-grade platinum temperature sensors with mutual monitoring for continuous operation - Double doors with wide-area interior glass to prevent contamination and temperature fluctuations - Intuitive operation with Memmert ControlCOCKPIT and AtmoCONTROL software - Constructed from high-quality, corrosion-resistant stainless steel - Integrated data logger and multiple interfaces for advanced programming and documentation options - Condensation-free operation within specified temperature-humidity ranges - Programmable temperature and humidity ramps via AtmoCONTROL software The Memmert ICH750 Stability Climate Chamber 749L, 115V sets the standard for stability testing, excelling with its precise control of both temperature and humidity, essential for rigorous testing standards such as ICH, WHO, EMA, ASEAN, GMP, GLP, and GCCP. This climate chamber offers a temperature range of -10°C to 60°C without humidity and +10°C to 60°C with humidity, alongside a humidity control range of 10 to 80% RH. Its exceptional temperature and humidity homogeneity is achieved through a large-area air jacket on all four sides and a digitally controlled active humidification and dehumidification system. A notable feature of the ICH750 is its double-door design, which includes a wide-area interior glass door to prevent contamination and maintain temperature stability while providing clear visibility of the chamber's contents. The chamber's interior is hermetically sealed, ensuring efficient water use once the desired setpoints are reached, provided the door remains closed. Additionally, the chamber is equipped with two high-grade platinum temperature sensors with mutual monitoring to ensure uninterrupted, reliable operation even if one sensor fails. Operation is made simple with the Memmert ControlCOCKPIT and AtmoCONTROL software, which allow for intuitive navigation and easy programming of temperature and humidity ramps. The ICH750 is almost exclusively made from high-quality, corrosion-resistant stainless steel, making it both durable and easy to clean. A wide range of programming and documentation options are available through its interfaces, integrated data logger, and software, ensuring that this climate chamber is not only robust but also adaptable to various scientific and industrial applications. INCLUDED: TheMemmert ICH750 Stability Climate Chamber 749L, 115V includes: - 2 x Stainless Steel Wire Shelves - Water Tank w/ Connection Hose - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Are you overwhelmed by the number of production processes? What about having them all under control? (more) To be able to analyse and correct them in real time? After all, it is the key to increasing the efficiency of the production line! Our clients, the factory owners, were the ones who told us about their problems and needs. Our answer is simple: the E2R System. This software is designed to make your work easier. The E2R System consists of six independent modules: 1. E2R Weighing, 2. E2R Weighing Records, 3. E2R Formulations, 4. E2R PGC, 5. E2R Checkweigher, 6. E2R Moisture Analyzer. Choose the best module for your company. Need more information? With the E2R PGC module, you can: safely and continuously record measurements and controls at the weighing workstations; buffer the weighings and controls on the scales and transmit them to the computer; carry out product controls in grams and millilitres; carry out destructive and non-destructive controls; automate the control process; control operator errors; support dual-platform scales; carry out two controls at one weighing workstation; synchronise time of the weighing workstations; transfer the “Products”, “Operators” and “Schedules” databases from the computer to the scales; schedule a cyclic product control on the selected scales; set a reminder to take a measurement in an ongoing control with the possibility of using a signalling option; check correctness and determine tare thanks to the average tare module; determine the average tare before each control or at the set interval; record weighings and controls taken from the scales into the computer; monitor the status of scales and controls in the system; disable the measurement recording for tare outside the tolerance range; disable the recording of the net mass measurement outside the tolerance range; exchange data with external systems; use friendly and flexible reporting mechanisms, such as: - generating information on measurements and archived controls from a particular time interval, - data browsing using filtering option, - a summary of selected weighing-related information, - reporting of individual weighings, - determining headers of individual weighing reports, - generating weighing statistics reports, - changing the batch quantity in the control to meet the statutory ranges criteria, - changing the batch number in the control, - adding individual comments to the control report. - export control and weighing reports to files: PDF, HTML, MHT, RTF, XLS, XLSX, CSV, TXT and more; customize the permission levels for different users of the system; customize the graphical interface, reports and graphs; work with external software for stockpiling, billing, accounting, and ERP systems; work with RADWAG weighing systems; select the language of each of the system components; work almost anywhere over Ethernet and Wi-Fi.