Benchmark BV1010-150 Tube Rack, 50 x 15ml (16.5mm)

Ethernet cable with angle connector: scale (HRP, MWSH, MWLH) – terminal (HY10, PUE5). Cable le (more)ngth: 5 m Compatible with: HRP platform MWSH weighing module MWLH weighing module

Branson Sound-proof EnclosureAlthough ultrasound is above the audible range of the human ear, mechan (more)ical noise occurs when liquids are treated ultrasonically. The noise may be disturbing in a room with low ambient noise level if exposed for prolonged periods of time. Operating the Sonifier® in the Soundproof Enclosure can minimize mechanical noise produced by ultrasonic processing. The sturdy cabinet is lined with waterproof, sound-absorbing material, which is impervious to most solutions or laboratory regents and can be easily cleaned. A fully-transparent door enables viewing of the process while limiting the noise to an acceptable level. The decibel rating will lower by 20-25db. Openings at the top and bottom of enclosure make for easy access for use with either a cup horn or standard probes. Comes with inside column and adjustable clamp plate. Side panel allows for placement of horns, tips and manuals. INCLUDED: The Branson Sound-proof Enclosure includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA C 3000 Automated Calorimeter Package 2/12 Measuring Range Max. 40000 J Reproducibility Dynamic ( (more)1g Benzoic Acid NBS39i) 0.15% Reproducibility Isoperibol (1g Benzoic Acid NBS39i) 0.05% Features - Easy handling by touch screen operation or a standard USB mouse - Two different starting temperatures to choose from (22°C, 30°C) - Automatic ignition, automatic water filling and draining, automatic oxygen filling - Several interfaces: Ethernet, RS 232, USB, SD card slot - Six temperature sensors to monitor all temperatures allowing best analyses - Spherically shaped decomposition vessel for better pressure stability and faster heat transfer - Easy sample preparation due to new upside down crucible holder technology - Can be operated with a chiller (e.g. RC 2 basic) The IKA C 3000 Automated Calorimeter Package 2/12 is a state-of-the-art solution for precise calorimetric analysis, offering exceptional usability and advanced features for superior performance. Its user-friendly touch screen operation and optional USB mouse interface make it simple to navigate, while automated processes for ignition, water handling, and oxygen filling enhance efficiency and reduce manual intervention. This innovative calorimeter supports two starting temperature settings (22°C and 30°C), making it adaptable for various experimental needs and workflows. Built for accuracy and reliability, the IKA C 3000 employs six integrated temperature sensors to monitor critical parameters and optimize analysis. The spherically shaped decomposition vessel ensures better pressure stability and faster heat transfer, resulting in reliable and reproducible results. With a dynamic mode offering up to six measurements per hour and isoperibol mode providing four, this calorimeter ensures high throughput without compromising precision. Additionally, the advanced crucible holder design simplifies sample preparation, further improving ease of use. This calorimeter is compatible with a chiller, such as the RC 2 Basic, to maintain optimal cooling performance, though the chiller is not included in the package. The IKA C 3000 is fully compliant with international standards, including ASTM, ISO, and DIN, ensuring consistent and reliable results across diverse applications. Compact with dimensions of 19.7 x 16.7 x 17.7 inches and a weight of 63.9 pounds, it fits seamlessly into any laboratory setup. With its robust design, automated features, and exceptional accuracy, the IKA C 3000 Automated Calorimeter Package 2/12 is ideal for laboratories focused on high-quality calorimetric analysis. INCLUDED: The IKA C 3000 Automated Calorimeter Package 2/12 includes: - C 3000 Measuring Cell - C 6012 Decomposition Vessel, Halogen Resistant - Wear Parts and Consumables for Up to 500 Tests - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert IPP410ecoplus Peltier-Cooled Forced Circulation Incubator 384L, 115V Setting Temperature Ran (more)ge Ambient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 384 L (13.6 cu. ft.) Features - 384 L volume capacity with precise temperature control - Working temperature range from 0°C (at least 20°C below ambient) to +70°C - Energy-saving Peltier heating/cooling system with individually controlled upper and lower elements - ControlCOCKPIT with TwinDISPLAY and adaptive multifunctional digital PID-microprocessor controller - Process timing starts only when the set temperature is reached with the SetpointWAIT function - Three freely selectable temperature calibration points for accurate control - Over- and undertemperature monitor with AutoSAFETY protection for enhanced safety - Durable stainless steel interior and textured stainless steel exterior for corrosion resistance and easy cleaning The Memmert IPP410ecoplus Peltier-Cooled Forced Circulation Incubator 384L, 115V is a high-capacity, energy-efficient incubator designed for precision temperature control in demanding laboratory environments. With a spacious 384-liter volume and a working temperature range from 0°C (at least 20°C below ambient) to +70°C, it offers flexibility for a wide range of incubation applications. The Peltier heating and cooling system, featuring individually controlled upper and lower elements, ensures uniform and reliable temperature distribution. Enhanced control is provided by the ControlCOCKPIT with TwinDISPLAY, which includes a multifunctional PID-microprocessor controller with dual high-definition TFT-color displays. For precise timing, the SetpointWAIT function ensures that the process only begins once the set temperature is achieved. This incubator prioritizes safety and durability with an AutoSAFETY system, which includes over- and undertemperature monitors and visual and acoustic alarms. Constructed with a stainless steel interior and a textured stainless steel exterior, it is resistant to corrosion and easy to clean. Supporting up to 14 shelves and a maximum chamber load of 440 lbs, the IPP410ecoplus provides ample space for various sample sizes and types. Additional features, such as three freely selectable calibration points, an autodiagnostic system, and AtmoCONTROL software for advanced programmability, make it an indispensable tool for labs focused on efficiency, reliability, and sustainability. INCLUDED: The Memmert IPP410ecoplus Peltier-Cooled Forced Circulation Incubator 384L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IN160plus Natural Convection Incubator 161L, 115V Setting Temperature Range +20 to +80°C Co (more)nvection Type Natural Convection Chamber Volume 161 L (5.7 cu.ft.) Features - Set temperature range from min. 5°C above ambient up to +80°C, with a display resolution of 0.1°C for precise control - Control technology includes adjustable parameters such as temperature (Celsius or Fahrenheit), air flap position, program time, and daylight savings time - HeatBALANCE function adapts the heating distribution between upper and lower circuits from -50% to +50% for optimal performance - Fixed sterilization program (4 hours/160°C) for chamber sterilization (not for load sterilization) - AutoSAFETY system provides integrated over- and undertemperature protection with visual and audible alarms - Stainless steel interior with a volume of 161 L and a max chamber load of 462 lbs, offering robust durability - AtmoCONTROL software available for data logging, programming, and management via USB or Ethernet - High-quality textured stainless steel casing, scratch-resistant and durable, with dimensions of 29.3" x 43.5" x 23" The Memmert IN160plus Natural Convection Incubator 161L, 115V is designed for precision temperature control in demanding laboratory applications. With a working temperature range of min. 5°C above ambient up to +80°C, this incubator ensures consistent conditions for your samples. The twin Pt100 sensors in a 4-wire circuit provide accurate temperature monitoring, while the adaptive HeatBALANCE function allows for fine-tuned heat distribution between the upper and lower heating circuits. The sterilization feature, with a fixed 4-hour cycle at 160°C, ensures a sterile environment within the chamber, safeguarding the integrity of your work. Equipped with the advanced ControlCOCKPIT system, this incubator offers an intuitive interface with dual high-definition TFT displays, allowing users to adjust parameters such as temperature, air flap position, and program times. The durable stainless steel interior, reinforced with deep-drawn ribbing, provides 161 liters of internal volume and can support up to 462 lbs of total load. For seamless data management, the AtmoCONTROL software enables logging and program management via USB or Ethernet. The Memmert IN160plus combines innovation, safety, and durability, making it a top choice for precise incubation needs. INCLUDED: TheMemmert IN160plus Natural Convection Incubator 161L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

E1-class mass standards are the elite in the world of metrology, because standards of this class rep (more)resent the highest level of precision and accuracy in mass measurement. The E1 classification is one of the most stringent standards that standards must meet in order to be considered the most advanced and trustworthy measurement tools. E1 - class standard: flat polygonal sheet Nominal value: 50 mg Material: Stainless steel What Are the Characteristics of the E1 Class? Highest Precision - The allowable deviation from the actual weight is minimal, making standards of this class ideal for applications where every gram matters. Stability and Repeatability - This guarantees a consistent level of accuracy over the long term. Accurate Calibration - Standards of this class must be regularly compared with other standards of known mass to confirm their measurement accuracy. Materials with Unique Properties - E1 class mass standards are often made of materials with exceptional physical properties, which makes them stable and resistant to changes in environmental conditions. Application 1. Analytical Laboratories In analytical laboratories where accurate measurements are crucial, E1 class mass standards are used to calibrate balances with the highest precision. 2. Pharmaceutical Industry In drug manufacturing, where even the slightest deviation from the standard affects quality, E1 class mass standards are irreplaceable. 3. Scientific Research In scientific research, especially in areas requiring the highest precision, such as physics or chemistry, E1 class mass standards are used to ensure reliable results. 4. Metrology Industry In metrology laboratories where research on E1 class mass standards alone is carried out, E1 class standards are the standard of excellence. Class E1 mass standards are not only measuring tools, but also a symbol of metrological excellence. Their use affects the quality of measurements in various areas of life because they provide precision that can be relied upon. They are a key element in the world of mass measurement, shaping standards and raising the bar for all measurement tools.