Applied Biosystems MDS Sciex 027463 rev G MS Ion Source

Labconco SecondaryVacuum Trap, 2L, 9-3/4" h x 7-7/8" dia. with 3/4" connection For processing sample (more)s with low eutectic points. Trap connects in series with a freeze dry system or vacuum evaporation system and vacuum pump to prevent contaminants from migrating into the vacuum pump. An insulated well, when dry ice and solvent are added, cools to approximately -75C (-103F). When used alone, Dry Ice Secondary Trap may serve as an inexpensive collector. Simply connect a sample directly to the incoming port and add a vacuum pump to the outgoing port. Dry ice and solvent, such as alcohol, are required (not included). Features Trap will cool to approximately -75C (-103°F) with dry ice and solvent in its removable well Can be used as an inexpensive collector: connect a sample to incoming port, vacuum pump to outgoing port, and system is complete Stainless-steel, with cover INCLUDED: The Labconco 7538000 SecondaryVacuum Trap, 2L, 9-3/4" h x 7-7/8" dia. with 3/4" connection includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Dimensions (WxDxH): 1200 x 940 x 2400 mm Internal dimensions (WxDxH): 1100 x 700 x 900 mm Base cabin (more)et with extraction Taps: Compressed air, Gas, Water Extraction diameter: 195 mm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Ohaus heavy-duty orbital shakers These models are designed to handle a wide range of applications, e (more)nsuring constant orbital shaking. Digital models offer accurate speed control for applications that require repeatable results. - Includes a tray and a rubber mat; over 70 accessories as an option - Maintenance free motor - Protect your samples. The increase function allows a gradual increase of the speed up to the set point, to avoid splashing. If so, a sensor detects the unbalance of the load and slows down the speed reaching a safer one Applications Cell cultures, solubility studies, extractions, suspensions and bacterial and yeast cultures, dyes / bleaches, immunoassays, protein studies, absorption techniques Display Easy-to-read independent LED displays with speed and time information, allowing the operator to view both settings simultaneously Operation Detachable three-wire cable and plug (included) Communication The RS232 interface provides one-to-one communication for data collection and unit control Structure Cold Rolled Steel (CRS) Construction features Integrated tray (457 x 610 mm) with non-slip rubber mat included

Radwag laboratory holders have been designed to facilitate faster and more convenient weighing. They (more) ensure perfect and safe fixing of small vessels of typical and non-standard shapes. Features: Maximum weighing ergonomics Direct dosing of a sample into a vessel High efficiency, lower costs (minimized potential loss of samples during transfer) Direct dosing of samples into various vessels (test tubes, round flasks, flat flasks, plastic test-tubes, titration vessels) Laboratory holders are compatible with all Radwag analytical balances. Intended use: glass and plastic tubes filters other vessels

Ohaus ISWV02HDG Waving Incubating Shaker The Ohaus ISWV02HDG Incubating Waving Shaker combines the u (more)nique vertical and horizontal "wave" motion with general purpose incubation in one compact bench top unit. The ISWV02HDG is designed to incubate samples from 5° above ambient to 65° C to provide accurate and repeatable results. Waving shakers offer a smooth, low-foaming three-dimensional "wave" motion. The ISWV02HDG features LED displays with touchpad controls. Both models include safety features that protect both the user and samples. Equipped with LED displays and touchpad controls for temperature, speed/tilt angle and time. Timer will display elapsed time or when programmed to a set time, will turn off when time reaches zero. Microprocessor control provides electronic tilt angle adjustment, allowing easy adjustment in 1° increments for tilt and 1 rpm for speed while unit is running. PID controller for precise temp. control. Units slowly increase speed to desired setpoint to avoid splashing, and feature overload protection. Audible and visual signals will activate when system detects an obstruction or overload of the tray.INCLUDED: The Ohaus ISWV02HDG Waving Incubating Shaker includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty Ohaus ISWV02HDG Waving Incubating Shaker SpecificationsTemperature RangeAmbient +5° C to 65° CTemperature Uniformity± 0.5° C at 37° CSpeed Range1 to 30 rpmSpeed Accuracy± 1 rpmTilt Angle0 to 20°Timer1 second to 160 hoursMaximum Weight Capacity5 lbs (2.3 kg)Tray MaterialAluminumTray Dimensions (L x W)9.25 x 7.25" (23.5 x 18.4 cm)Interior Dimensions (L x W x H)10.75 x 7.75 x 3.4" (27.3 x 19.7 x 8.6 cm)Overall Dimensions (L x W x H)17 x 11 x 10.5" (43.2 x 27.9 x 26.7 cm)Ship Weight22 lbs (10 kg)Comparison of ModelsSpecificationOhaus ISHD23HDGOhaus ISLD04HDGOhaus ISLDMPHDGOhaus ISLDMPHDGLOhaus ISRK04HDGOhaus ISWV02HDGTemperature RangeAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°CSpeed Range15 rpm to 500 rpm100 to 1200 rpm100 to 1200 rpm100 to 1200 rpm1 to 50 rpm1 to 30 rpmSpeed AccuracyAbove 100rpm +/- 1%, Below 100rpm +/- 1 rpm± 2% of set speed± 2%± 2%± 1 rpm± 1 rpmOrbit25 mm (0.98")3 mm (0.12")3 mm (0.12")3 mm (0.12")N/AN/AMaximum Weight Capacity50 lb (22.7kg) @ 125 rpm, 10 lb (4.53kg) @ 500 rpm8 lbs (3.6 kg)4 microplates or 2 micro-tube racks4 microplates or 2 micro-tube racks10 lbs (4.5 kg)5 lbs (2.3 kg)Tray Dimensions (L x W)18 x 18" (457 x 457 mm)11 × 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)10 x 7.5" (25.4 x 19.1 cm)9.25 x 7.25" (23.5 x 18.4 cm)Overall Dimensions (L x W x H)23.5 in x 32.1 in x 26.6 in17 x 11 x 10.7"17 x 11 x 7.75"17 x 11 x 7.75"17 x 11 x 10.5"17 x 11 x 10.5".comparison-table tr td:nth-child(7) { background-color: #fffacd; }

Benchmark IPS7000-10 MHS-10 10-Position Hotplate Stirrer The Benchmark Multi-Position Hotplate Stirr (more)ers provide simultaneous heating and stirring of multiple samples. The large top-plates feature a durable, chemically resistant, white-ceramic coating that provides exceptionally uniform temperature control up to 120°C. Both mixing speed and temperature are conveniently controlled on the digital display, which also features a safety LED that warns the user when the top plate is hot and unsafe to touch. Two models are available, offering either 5 or 10 stirring positions. Each stirring position is driven by an independent motor, providing efficient mixing of sample sizes up to 1000ml. With increased spacing (100mm) between stirring positions, the top surface is designed to accept a wide range of vessel types, including beakers, Erlenmeyer flasks and media storage bottles. INCLUDED: The Benchmark IPS7000-10 MHS-10 10-Position Hotplate Stirrer includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty