AIRFLOW TA2-2 Thermisches Anemometer Thermometer 0-2 M/S 0-80°C Velocity

Hermle 6 x 50ml Round Rotor, High Speed The Hermle 6 x 50ml Round Rotor, High Speed is a centrifuge (more) rotor designed for use with Hermle Z32-HK, Z36-HK, Z327, Z366, and Z446 series centrifuges. With a maximum speed of 13,000 RPM (16,000 RPM with Z32-HK & 21,000 RPM with Z36-HK models only) and a maximum RCF of 15,869 x g (24,039 x g with Z32-HK & 41,410 x g with Z36-HK models only), this rotor is capable of delivering fast and efficient separation of samples in a range of laboratory applications. The rotor has a maximum capacity of 6 x 50ml, making it suitable for processing small to medium-sized samples. INCLUDED: The Hermle 6 x 50ml Round Rotor High Speed includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle 6 x 50ml rotor The Hermle 6 x 50ml rotor is a high-performance centrifuge rotor designed for  (more)use with the Hermle Z32-HK, Z307, and Z327 series centrifuges. It has a maximum capacity of 6 x 50ml, allowing it to process a large volume of samples at once. The rotor's 40° angle helps to ensure optimal separation of samples during centrifugation. With a maximum speed of 6,000 RPM and a maximum RCF of 4,427 x g, the Hermle 6 x 50ml rotor is capable of high-speed separations, making it ideal for applications such as molecular biology, biochemistry, and clinical research. INCLUDED: The Hermle 6 x 50ml rotor includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf 2 x 25ml Adapters, Cat. # 022639391 New in box Eppendorf Eppendorf 2 x 25ml Adapters, Cat. (more) # 022639391, for A-4-38 rectangular buckets for Eppendorf 5702 centrifuges. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 2 x 25ml Adapters, Cat. # 022639391 includes: - Full 6 Month Parts and Labor Warranty

Accuris W1100-200 F1 Grade Calibration Weight Set, 23 pcs, 1mg to 200gPrecision, compact, and portab (more)le balances (readability 0.1 to 0.001g) can be calibrated with our Basic Class F1 Calibration Set. Included in the set are 23 stainless steel cylindrical and leaf weights: 2 x 200g, 1 x 100g, 1 x 50g, 2 x 20g, 1 x 10g, 1 x 5g, 2 x 2g, 1 x 1g, 1 x 500mg, 2 x 200mg, 1 x 100mg, 1 x 50mg, 2 x 20mg, 1 x 10mg, 1 x 5mg, 2 x 2mg, 1 x 1mg. Cylindrical weights are marked with their nominal value. All are supplied in a protective case along with tweezers, a cleaning cloth and dust brush. INCLUDED: The Accuris W1100-200 F1 Grade Calibration Weight Set, 23 pcs, 1mg to 200g includes: - 23 stainless steel cylindrical and leaf weights: 2 x 200g, 1 x 100g, 1 x 50g, 2 x 20g, 1 x 10g, 1 x 5g, 2 x 2g, 1 x 1g, 1 x 500mg, 2 x 200mg, 1 x 100mg, 1 x 50mg, 2 x 20mg, 1 x 10mg, 1 x 5mg, 2 x 2mg, 1 x 1mg - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

MAT Medical Air Technology BioMAT 2 Class 2 Microbiological Safety Cabinet This was removed from a u (more)niversity lab where it was surplus to requirements. The item powers on with airflow and both UV and white lights working. It is in good cosmetic condition with some marks from use. Cabinet Dimensions - L120 W63 141cmFrame Dimensions - L112 W60 H84cmInternal workspace dimensions - D54 W106 H70cm

Heidolph Glassware Set G3 Vertical condenser for all standard distillations; theoption with the sma (more)llest space requirement - Glassware set includes one 1,000-ml evaporating flaskand one 1,000-ml receiving flask - Evaporating flasks and vapor tubes which come with astandard NS 29/32 joint size are also available with NS 24/29 groundjoints - Ventilation cap without ground joints for easy handling andgrease-free operation included - A venting valve with refill function is optionally available - Suitable for the automated distillation program Dynamic AUTOaccurate onHei-VAP Expert / Ultimate Control models - Also available upon request: glassware sets for Soxhletextraction and descending condenser system INCLUDED: The Heidolph Glassware Set G3 includes: - G3 Vertical Glassware - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Ventilation Cap - Full 3 Year Manufacturer's Warranty

The LC-NMR-MS Interface is designed to sit between an HPLC system, an NMR spectroscopy probehead and (more) an MS unit. It would normally be mounted on top of the MS table immediately in front of the MS input connector. The BNMI-HP consists of 3 medium pressure (> 60Bar) syringe pumps, a 1:20 splitter, an 8-Port valve, 3 mixing chambers (T-Pieces) and associated control and interface electronics. The flow of the HPLC separations to the MS unit can be modified by pumping additional solvent from the syringe pumps. This improves the MS peak detection and shortens the time needed for the split separation to reach the MS. Separations can also be stored as a result of an MS peak detection as well as through UV absorption peak detection. The splitter splits the fluid flow from the HPLC in a 1:20 ratio. i.e. ca. 5% of the fluid is directed to the MS and the remainder to either the NMR probehead for immediate analysis or to the BPSU36 storage cassette for storage and later analysis.  The fluid directed to the MS is mixed in the mixing chamber (T-Piece) with the solvent pumped from the syringe pumps. The two left hand syringe pumps pump alternatively to guarantee a constant ’makeup’ flow. The 3rd pump at the right hand side is used to pump a calibration fluid into the flow path to allow the MS to be calibrated (or simply synchronized) at the start and end of each measurement cycle. The 8-Port valve is used to direct the fluid flow. Control of the BNMI Unit is performed using the HyStar program via an ethernet interface. Commands received from HyStar are interpreted in the BNMI Control Board. The control board then sets up the BNMI unit accordingly e.g.: Starts the pumps, changes the flow rate, turns the 8-Port valve. The splitter has a fixed mechanical function and cannot be controlled or adjusted. It simply accepts a fluid flow and splits it into 2 paths in a 1:20 ratio. However, other split ratios are available (for example 1:100 may be preferred if you have very high sample concentrations).

Ice production: 90 kg/24 hours Storage bunker capacity: 30 kg External Dimensions (WxDxH): 500 x 660 (more) x 960 mm External material: Stainless Steel Noise level according NEN-EN-ISO 11202: 49 dB (A) Adjustable feet: Feet adjustable between 110 mm and 150 mm Drain: Standard drain for melting water Electrical: 220-240 V, 50 Hz Weight: 67 kg Gross weight (including flake ice): 79 kg