2x Heraeus Sepatech # 8083 MTP Micropalte Buckets Holders Gehänge

Eppendorf F-45-24-11 Fixed Angle Rotor, Cat. # 022639471 Eppendorf F-45-24-11 Fixed Angle Rotor, new (more) in box. This rotor is for use with Eppendorf 5702/R Centrifuge. INCLUDED: The Eppendorf F-45-24-11 Fixed Angle Rotor, Cat. # 022639471 includes: - Full 1 Year Parts and Labor Warranty Eppendorf F-45-24-11 Fixed Angle Rotor SpecificationsMax Speed4,400 RPMMax RCF24 x 3,75gCapacity24 x 1.5/2ml

Metrohm 870 KF Titrino Plus with 703 Ti Stand 1.703.0010 Titration System This was removed from a u (more)niversity lab where it was surplus to requirements. The system is in very good cosmetic condition with minor marks from use. Included are; 1x Metrohm KF Titrino plusModel 870Prog version: 5.870.0025 The unit powers on and is in good cosmetic condition. The digital display is working, however, there are some signs of screen burn, thus making it a little difficult to read the screen. It is completely readable though. 1x Metrohm 703 Ti StandType: 1.703.0010The unit is in good cosmetic condition but we were not supplied with the PSU, so have been unable to power it up for testing.

Cobas EIA incubator thermo shaker. Two selectable temperatures: 37º and 45º. Front and rear block sh (more)aking motion, permanent / interval. Four blocks of 25 spaces for 1.5 - 2 mL tubes.

PUE HX5.EX terminal is a constructional component of industrial multifunctional load cell scales. It (more) is the most modern RADWAG solution to be used in areas endangered with explosive atmosphere. The HX5.EX is compliant with ATEX directive regulations. The terminal is intended for operation in environment filled with explosive gases and dust, and can be placed in zones: 1/21 and 2/22. Standard version of the terminal is equipped with 2 serial intrinsically safe RS232 communication interfaces, and with one intrinsically safe RS485 interface. They facilitate communication with equipment predetermined for use in hazardous areas. Possibility to add digital inputs/outputs expands the range of instruments compatible with the terminal by robotic elements compliant with ATEX directive. For more demanding customers, RADWAG has developed IM01.EX module, installed in the safe area, which extends the available connector range by Ethernet, USB, 4-20mA/0-10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables communication between the terminal and external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Models There are 4 different models: PUE HX5.EX-1: 2 × RS232, RS485 - standard design, PUE HX5.EX-2: standard design + 4IN/4OUT, PUE HX5.EX-3: standard design + 4IN, PUE HX5.EX-4: standard design + 4OUT. Mechanical Design The housing, made of AISI 304 stainless steel, ensures high ingress protection, IP66 / IP68 (up to 1.5 m immersion). The terminal features 5" colour LCD, covered with polycarbonate protecting it against shocks, and a membrane keypad. Ease of operation, clear menu and intuitive information arrangement on the display guarantee comfort of operation. Hermetic intrinsically safe interface connectors are located on the back side of the housing. Stable bracket enables mounting the terminal either on a flat horizontal surface or on the wall. The device tilt can be easily adjusted. Power Supply The PUE HX5.EX terminal can be connected to the mains only with a certified intrinsically safe power supply, manufactured by RADWAG: PM01.EX-1 power supply intended for operation in hazardous area: zone 1 and 2 where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. zone 21 and 22 where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM01.EX-2 power supply intended for operation in safe area, equipped with intrinsically safe circuits which may be placed in: zone 1 and 2 where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. zone 21 and 22 where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. IM01.EX Communication Module The terminal’s interface range can be expanded using IM01.EX communication module, connected to the terminal via an intrinsically safe RS485 interface, placed outside the hazardous area. Models: IM01.EX-1 Standard: 2x RS232, USB,4 I/4 O, Ethernet IM01.EX-2 analog output 4-20mA/0-10V IM01.EX-3 12 I/12 O, digital IM01.EX-4 Profibus DP IM01.EX-5 PROFINET IM01.EX-6 CANopen (available soon) IM01.EX-7 DeviceNet (available soon) IM01.EX-8 RS485 IM01.EX: ETHERNET IP (available soon) Multifunctional Software Terminal software facilitates processes such as weighing, parts counting, dosing, and percent weighing. Terminal’s information system is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. The interfaces enable communication between the terminal and the accessories intended for operation in the hazardous and non-hazardous areas. Accessories: barcode scanners, printers, external displays, control buttons, light signalling towers and other controlling/signalling devices. The terminal can communicate with systems for automatic process control and superior IT systems.

Branson SFX150 SonifierFeatures - 40 kHz ultrasonics for quiet tabletop operation. - Sample sizes fr (more)om 0.2 to 150 mL. - High-efficiency, handheld and stand-mountable converters require no internal cooling. - Scrollable, multifunction screen with pushbuttons. - Continuous or pulsed ultrasonics. - Amplitude control range from 10 to 100%. - Microtip mode limits amplitude to 70% to extend tool life. - Control modes include time, temperature, and energy. - Advanced energy control mode delivers precise energy input in continuous or pulse modes. The fully digital control screen allows the user to quickly and effortlessly select control settings, power level, and sonification duration. The Branson SFX sonifer gives users ultimate control with an amplitute range of 10 to 100% along with continous or pulsed ultrasonics. These smaller, highintensity tips are ideal for processingsmaller samples in Eppendorf vialsor similar vessels. Sizes range from3/32" to 1/4". The Sonifier® SFX150 is part of the new lineup of Sonifiers from Branson, designed to bring the industry’s most advanced sample-processing capabilities to your laboratory. Geared toward low-volume samples ranging from 0.2 to 150 mL, the Sonifier SFX150 delivers up to 150 watts of power. And at 40 kHz, it’s quiet enough to operate on a lab bench without a sound enclosure. Because it is available with either a conventional or a handheld converter, you can use the SFX150 in a stack configuration to process longer-duration samples, or process samples quickly by hand using the comfortable, ergonomically-designed handheld converter. In operation, Sonifier SFX Series monitors ongoing processes on a scrollable, digital screen, providing continuous updates of key variables including power level, energy usage, sample temperature, and experiment progress. For assured repeatability and precision on a greater scale, the SFX Series enables users to create and store up to 20 sampleprocessing programs. Program parameters include continuous or pulsed ultrasonics; time, energy, or temperature control modes; pulse on-time/energy, off-time and total on-time/energy; or amplitude as a percentage. Sonifier® SFX150 Cell Disruptors and Homogenizers Branson’s exclusive handheld converter is designed with the user in mind. The handheld converter offers an ergonomic grip for comfort and control, and a recessed pushbutton and LED indicator for assured operation. In Energy Mode, the SFX Series power supply manages the processing cycle to deliver a precise, user-determined input of ultrasonic energy (measured in joules), either continuously or in individual pulses. The SFX Series automatically compensates for any variability, extending or shortening the cycle as needed to deliver the precise energy output. Does not include Support Stand or Converter Clamp as pictured (additional cost). Please see the "Accessories" Tab Features: Click Here to View Product Video INCLUDED: The Branson SFX150 Sonifier includes: - 40 kHz Traditional Converter - 1/8" Microtip - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

one LINEAR POSITION SENSOR Manuf: PENNY + GILES / UK Model: LP- 2C S/N: 309066 Description: high pr (more)ecision linear position sensor for applcations in AVIONICS or other high technics fieldswith cardanic mounts on both endstotal resistance..............................................1000 Ohmstotal stroke..................................................... from 2 mm to 105 mm instrument is in used condition, 100 % functional tested in GERMAN GOV LAB ( NOT calibrated )