Peak Scientific Model Trace 500cc Hydrogen Generator Lab

Peak Scientific Trace 500 Hydrogen Generator This was removed from a university lab where it was su (more)rplus to requirements The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks.

Parker NitroFlowLab 4278 Nitrogen Gas Generator This item was removed from a university where it was (more) surplus to requirement. It is in good cosmetic condition and powers up, we are unable to test it further at our facility. Running Hours: 26,042 Power supply cable included. Product details: Model 4278 CryoSerial No. 4278-18NFLC00010Manufactured 29.05.18 0-8 barg operating pressure10˚C to 35˚C operating temperature

CLIMATE CHAMBERS KKS SMART POL-EKO KKS - RELIABLE AND HIGHLY CUSTOMIZABLE Built and designed without (more) compromise, they are successfully used in medical, biotechnological, chemical and industrial laboratories. An important application is pharmaceutical stability testing according to ICH Q1A (R2) - (CPMP/ICH/2736/99). They maintain a constant temperature from 0°C to 100°C and thanks to an steam humidifier, they regulate humidity from 10% up to 90%. They are equipped with the most advanced POL-EKO control panel: the Smart PRO touchscreen. Large 7' display, WiFi for communication and data transfer, programming, alarms, internal memory for recording and overview of data in graphic form and much more, including standard software for complete management via PC. Continue reading and discover all the other surprising features of these climatic chambers! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. Thanks to SMART PRO you will be able to have possibilities that you didn't have before. Cutting-edge functions and freedom of transfer and remote use, thanks to LabDesk software. You can find all the features of the SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PRO PANEL? - Sharp 7' color touch screen - LAN, USB and WiFi ports for communication and data transfer - Fast, multi-segment, time and temperature programming - Adjustable ramps - Recording of the minimum, average and maximum temperature value for each segment - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - Fan speed control 0...100% or 10%...100% (depending on chamber capacity) - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Temperature sensor failure alarm - Event log with user notifications - Controls can be managed even when wearing latex gloves - Overview of the set and current parameters during operation in tabular and graphical form - Operation in temperature or time priority mode - Ability to create user accounts with assignment of rights and passwords - Memory of 40 user programs - Data log – 10,000 data records for each user, ability to view data on screen in tabular or graphical form - Direct data download via USB port - Event log QUALITY FIRST Resistant. Durable. POL-EKO climatic chambers are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The climatic chambers of the KKS Smart series are builded with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal glass door - Interior made of acid-resistant stainless steel according to DIN 1.4301 - Stainless steel grill shelf (INOX) - Overtemperature protection class 3.3 according to DIN 12880 - Castors - Quality control protocol (at +25°C and 60%rH) - Automatic defrost function - USB port, LAN (with cable) and Wi-Fi connection - Lab desk software - External probe insertion hole diam. 30mm to the left - Deionized water tank - Open door alarm KKS SMART PRO SERIES POL-EKO offers 4 climatic chamber models with capacities from 109 to 749 litres. Unleash your possibilities. In the image below, the graph shows the excellent working range (humidity/temperature) that the POL-EKO climatic chambers are able to offer you, with the KK series (ultrasonic humidifier) ​​and with the KKS series (steam humidifier ). STEAM HUMIDIFIER The KKS climatic chambers with steam humidifier do not emit ultrasound and therefore allow the reproduction of insects (e.g. Drosophila melanogaster). Compared to KK chambers they have a wider temperature and humidity range and can be used for testing electronic components, plastics or building materials. NOTE: common water (conductivity 125-1250 μS/cm) can be used as a source. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Fan 3 - Internal glass door 4 - Hole for ø30mm external probe 5 - Shelf 6 - Position of the condenser 7 - Wheels with lock 8 - Solid external door (optionally with window) 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Power cable 3 - Connectors 4 - Connection to tap water 5 - Connection to the reverse osmosis system 6 - Control valve 7 - Connection to demineralised water 8 - Connection to the drain 9 - Connection for assistance 10 - LAN port 11 - Fuse Together with the climatic chamber you will also receive: OPTIONS POL-EKO allows you to increase the possibilities of your climatic chamber with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Door with panoramic window - Stainless steel wire shelf INOX - Perforated shelf - Reinforced shelf - Stainless steel basins - Internal socket - IQ OQ PQ calibration and qualification - Backup battery for the display in case of power failure - Clean contact - Non-standard 20/60/100 mm access hole - Additional 30 mm access hole - Access control system (card, key tag or device equipped with NFC, for example smartphone) ◉ POL-EKO CUSTOMERS The SPEKTROCHEM research and development center for paints, adhesives and polymers has been a loyal POL-EKO customer for several decades. Use climatic chambers for tests on water-based raw materials prepared in the laboratory. FUN FACT? Thanks to the climatic chambers it is possible to create excellent food products, such as black garlic, which needs to ferment at stable temperatures and humidity. Download the informative pdf: Black Garlic with POL-EKO.

110V

The UMA 2.5Y.FC automatic weighing system has been designed to test mass changes of filters made of  (more)quartz glass fibre, glass fibre, teflon and teflon covered with glass fibre. Mass measurement is carried out with readability of 1 μg or 0.1 μg. The weighing system enables conditioning filters in accordance with PN-EN 14907 and PN-EN 12341 standards. Effective and Excellent Measurement The UMA 2.5Y.FC automatic weighing system is a first-class solution for professional mass measurement. Dynamic control and correction of mass indications both ensure fast and stable weighing regardless of the weighed filter type. The UMA weighing systems, due to the elimination of the human factor, temperature changes and air drafts, guarantee excellent measurement repeatability. Effective Weighing Analysis Full automation of the weighing cycle, thanks to the elimination of the ‚human factor’, is a guarantee of measurement repeatability impossible to be obtained in case of manual weighing. Remote programming of measurement processes significantly increases operation efficiency. Dedicated Software The RMCS Filters software allows to manage time and comparison test plans of each filter or filter series. Summary reports and report components are defined by the system administrator. Metrological Control Periodically, correctness of weighing system operation is verified via a certified mass standard or a reference filter. Stable Mechanical Design The UMA 2.5Y.FC automatic weighing system is equipped with an integrated anti-vibration table ensuring the greatest stability of mass measurements. Ambient Conditions Module The ambient conditions module is housed inside the bottom part of the weighing system. This results with a laminar air flow that does not disturb the ongoing filter mass measurement. The range of temperature and humidity changes is automatically forced in accordance with the values programmed via device terminal. Climate Chamber The integrated climatic chamber guarantees constant ambient conditions in the chamber, ensuring proper filter conditioning in accordance with the PN-EN 12341:2014 standard: stability of operating temperature: ± 1oC, stability of relative humidity: ± 2.5%, the operating humidity in the climate chamber during the process: 30–60%, the room temperature during operation must remain within the range of 19-25°C, and the relative humidity should oscillate between 40–60%.

Polyscience 6260MXCRY10C Cryoprecipitate Bath (Fixed at 4 Degree C), 120V, 60Hz3D Visualization of t (more)he Polyscience Cryoprecipitate BathThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. The PolyScience Cryoprecipitate Bath is a self-contained, custom-designed Recirculating Chiller designed for the safe, reliable thawing of Fresh Frozen Plasma (FFP) for the recovery of Cryoprecipitated Antihemophilic Factor (AHF). It is capable of thawing up to 24 units of FFP or whole blood (WB) simultaneously. Features - 13.8 gallon (52.24 liter) reservoir - Removable, center-hinged reservoir cover - 4°C preset thawing temperature - Bright temperature and elapsed time displays - Calibration capability - Removable, high-efficiency fluid filter - Reservoir drain - Over-temperature and flow alarms INCLUDED: The Polyscience 6260MXCRY10C Cryoprecipitate Bath (Fixed at 4 Degree C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco FreeZone Bulk Tray Dryer 115V,50/60Hz FreeZone Bulk Tray Dryers lyophilize moderate to larg (more)e bulksample loads or numerous small batches of vials or serum bottles. The Bulk TrayDryers have three large, 12.7” x 16.6” shelves that heat up to +60C. Optionsinclude a 6-port manifold, isolation valve, additional heated shelves andsample trays. Lyo-Works™ OS lets the user set up to 30 programs, with up to 16steps each; record, chart and store data; and receive email alerts. The traydryer connects to a FreeZone Console Freeze Dryer that provides a real timedisplay of the tray dryer’s parameters on a large capacitive touch screen. Features Chamber may accommodate two additional shelves (sold separately). 200-watt heater on each shelf for heating to +60C (+140F). A microprocessor maintains system temperature within 3C of set point. (Shelves are not cooled by the Bulk Tray Dryer. Samples must be pre-frozen.) Three sensor probes for monitoring sample temperature. Connections for two additional sensors are provided (additional sensors sold separately). System programming that is displayed on the FreeZone 6, 12 or 18 Liter Freeze Dryer (freeze dryer sold separately): Manual or Program mode; probe temperatures in C or F, vacuum in mBar, Pa or Torr; segment of the program that is in progress; time remaining in present segment; alarms for power failure; shelf temperature variation >±3C; failure to reach shelf set point temperature ±3C; and program completed. Data logging and storage, when enabled, that stores and displays data in table or chart on the FreeZone 6, 12 or 18 Liter Freeze Dryer (freeze dryer sold separately). Data logging may be exported via USB or Ethernet from the FreeZone Freeze Dryer. Vacuum release valve with knob for venting the chamber so the chamber door may be opened. Side-mounted power switch. Integral support stand with attachment port for connection to FreeZone 6, 12 or 18 Liter Console Freeze INCLUDED: The Labconco 780601000 FreeZone Bulk Tray Dryer 115V,50/60Hz includes: - Communication Cable - Hardware (Screws x 4, Nuts x 4, Washers x 8) - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Boekel Scientific FS100 XL Platelet Incubator w/built in Agitator The Boekel Scientific FS100 is a f (more)loor standing platelet incubator / agitation system. The unit has 25 shelves and can hold up to 100 units of platelets. Boekel Scientific pioneered the use of thermoelectric heating and cooling for the storage of platelets and has implemented this technology on the FS100. Thermoelectric heating and cooling is efficient and does not require refrigerant gas or compressors, which can be prone to failure. The system has a 7” industrial color touch screen and an alarm indicator light that can be viewed from across a large room. The large indicator light is illuminated when the unit is powered on and blinks when the unit enters an alarm condition. This indicator light allows for quick identification of a unit that requires attention. Boekel platelet incubation / agitation systems have an advanced control system with many automated processes including high low temperature alarm testing, unit temperature calibration and the patented inventory management system. The inventory management allows for platelet expiration tracking using color coded icons. This easy-to-use tool was designed to decrease loss of platelets due to time expiration. These systems also have an integrated thermal printer for printing temperature and event reports. This service free device replaces the old-style chart recorders that are difficult to read and require monthly maintenance. The control systems also have a USB port for downloading unit data and an ethernet port for connection the equipment to a network. All systems also have a battery backup system that will log data in the event of a power failure. The FS100 has smooth rolling, lockable casters making it easily to install and relocatable. If a blood bank uses a secondary temperature monitoring system they can easily attach a probe using the FS100 probe port and mounting hardware. Features: - 25 Removable shelves to store up to 100 units of platelets - Massive 7” industrial touch screen with intuitive icons - Gas-less/Compressor less heating and cooling design - Locking Casters for easy unit placement - Patented Inventory Management System to decrease wastage - Alarm and Standard Operation Indicator Light - Onboard thermal printer for keeping records of temperature data - Downloadable event log - Battery backup in the event of a power failure - Two-year Warranty - Extended Warranty Available Click Here to View Product Video INCLUDED: The Boekel Scientific FS100 XL Platelet Incubator w/built in Agitator includes: - 25 Removable shelves to store up to 100 units of platelets - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Beckman Coulter 15ml Conical Adapters, Cat. #: 359472 The Beckman Coulter 15ml Conical Adapters, Cat (more). #: 359472 are for use with the Beckman GH 3.8 Swing Bucket Rotor and Beckman SX4750/A Swing Bucket Rotor. These adapters feature a capacity for 14 x 15ml conical tubes each with a maximum tube diameter of 18 mm. INCLUDED: The Beckman Coulter 15ml Conical Adapters, Cat. #: 359472 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Beckman Coulter 15ml Conical Adapters, Cat. #: 359472Bottom ShapeConicalRotor CompatibilityBeckman Coulter GH 3.8 and SX4750/A Swing Bucket Rotors