Sanyo MDF-U32V Ultra Low-Temperature Freezer Lab

*Previously sold item, recently found in the stock count.* This Sanyo MDF-U74V VIP Series Ultra Low  (more)Temperature Freezer was removed from a university lab where it was surplus to requirements. The unit powers up and achieved -80˚C in testing. We left it on overnight. It is in good cosmetic condition with some minor marks from use. Internal dimensions - D58.5 W87 H140cm3 Shelves - 53.5 x 85.5cm

LABORATORY FREEZER manufactured by B Medical Systems Design and comfort of use - 7” touchscreen with (more) easily accessible temperature display in the door handle - Minimal ice formation allowing for easy defrosting - NFC card/password protected door lock mechanism - USB port and SD card slot for easy export of -41°C setpoint data - Modular internal equipment - Easy access to lower drawers - High quality stainless steel and other materials for durability Accurate temperature control and 24/7 monitoring - Uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Intelligent automatic defrost technology that allows for a stable temperature during the defrost cycle - Automatic shutdown of the evaporator fans each time the door is opened to reduce heat transmission - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - °B Universal software option for remote monitoring; reporting in accordance with FDA 21 CFR Part 11 and long-term archiving in combination with a data communication unit Energy efficient and eco-friendly performance - High cooling efficiency thanks to natural refrigerants in compliance with US SNAP and EU F-Gas regulations - Insulated interior doors, sealed gaskets, improved frame to minimize cold air loss and heat conduction - Frost prevention which reduces the pressure on the compressor - High quality stainless steel structure with antibacterial coating and injected polyurethane foam that provides high thermal insulation and storage capacity The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical sheet in Italian or in English for all the details.

The Sanyo MDF-U33V upright ultra-low freezer has a capacity of 333 liters and a temperature range of (more) -40°C to -86°C. Its external dimensions are 650 x 855 x 1810 mm, and the internal dimensions are 490 x 600 x 1140 mm. Equipped with a high-efficiency compressor cooling system and digital microprocessor temperature control, it includes high/low temperature and power failure alarms. It has double thermal insulation seals on its doors and a stainless steel interior. Power supply: 220V/50Hz. User manual. The Sanyo MDF-U33V upright ultra-low freezer is perfect for laboratories requiring safe storage of samples at ultra-low temperatures. With a capacity of 333 litres and a range of -40°C to -86°C, it guarantees optimal and reliable storage. This high-quality, overhauled equipment offers excellent value for money, ensuring efficiency and durability. Its robust design and advanced digital control make it easy to manage and monitor internal conditions, optimising safety and efficiency in the laboratory. Visit our website and purchase the Sanyo MDF-U33V today!

Corepoint Scientific NSBF231WSWCR-0 -15C to -35C Single Solid Door Plasma Freezer with Chart Recorde (more)r Temperature Setpoint Range -15°C to -35°C Capacity 23 Cu. Ft. Defrost Method Cycle Optimized, Automatic Features - Provides a spacious 23 cubic feet of storage, ideal for storing a large volume of blood-based products in compliance with FDA and AABB standards. - Features a top-mounted, variable speed compressor with a temperature setpoint range of -15°C to -35°C. - Equipped with seven standard 304 stainless steel drawers that can each hold up to 65 lbs. - Utilizes high-density urethane foam for both cabinet and door, enhancing thermal efficiency and maintaining uniform temperature. - Proportional Integral Derivative (PID) microprocessor with a clear LCD display and °C/°F switchable settings, providing precise control and easy monitoring. - Includes a full suite of alarms such as power failure, temperature sensor failure, and door ajar notifications, ensuring safety and compliance. The Corepoint Scientific NSBF231WSWCR-0 Single Solid Door Plasma Freezer is engineered to meet the rigorous standards required for the storage of blood-based products, conforming to FDA Class II medical device guidelines and AABB requirements. This plasma freezer offers a 23 cubic feet capacity and operates within a temperature setpoint range of -15°C to -35°C, ensuring optimal conditions for the preservation of critical materials. It features seven 304 stainless steel drawers that facilitate organized storage and easy access. The unit is built with high-density urethane foam insulation for superior temperature stability (+/- 0.1°C) and uniformity (+/- 0.7°C), and the exterior is finished in white powder-coated steel for durability. Mobility is enhanced with four swivel casters, front casters locking for secure placement. The plasma freezer includes a keyed door lock for restricted access, ensuring content security. Notable features include a Proportional Integral Derivative (PID) controller for precise temperature management, and a chart recorder for continuous monitoring and recording of temperature data. The freezer uses eco-friendly R600a refrigerant, aligning with EPA SNAP compliance for environmental responsibility. The dimensions of this freezer are 27.8 inches wide, 36.3 inches deep, and 81.5 inches high, and it weighs 360 pounds, making it a robust and reliable solution for any medical or laboratory setting requiring stringent blood storage regulations. INCLUDED: The Corepoint Scientific NSBF231WSWCR-0 -15C to -35C Single Solid Door Plasma Freezer with Chart Recorder includes: - 7 Drawers - 4 Swivel Casters - Key for Door Lock - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Capacity: 243 L Dimensions: H 168 x W 60cm Content: 243 liters Colour White Voltage: 220

MEMMERT ICO150 Co2 incubator / oven Equipment in new condition, never used. MEMMERT reference: ICO15 (more)0 Year of manufacture: 2023 Forced convection Volume: 156 liters Stainless steel chamber Screen with large display Temperature: amb +5°C up to +50°C IR probe CO₂: 0 to 20% 1 stainless steel water tray included per incubator Visual and audible alarms Sterilization at 180°C without needing to remove probes Dimensions L x D x H int. : 719 x 591 x 1066 mm Dimensions L x D x H ext. : 560 x 400 x 700 mm Temperature: ambient +5 to 50°C Weight: 92 kg Gross weight: 116 kg Side sheet slightly deformed (see photo) This in no way hinders the proper functioning of this equipment.

Application: Mass comparator AKM-2 series featuring automatic mass loader enables automatic determin (more)ation of mass deviations of a single weight in a single cycle. The system of automatic mass comparator is commonly applicable in mass measuring laboratories, and particularly in certification units for weights classes E, F and M. Design and functionality: The supervising part of a mass comparator is a digital module which cooperates with a controller of instrument’s mechanical components. The automatic mass loader features a basis with self-centring fields, a robot and a steel body. The digital module and the robot are located in mass comparator’s weighing chamber. The loading robot is controlled by the computer’s controller. The instrument is operated by means of digital display which is plugged to mass comparator’s controller. Lengthwise shift of the loading robot with weights is carried out automatically using solenoid actuators. Additional software functions enable loading and taking off the weights, data processing and storing, and data export to instrument’s memory.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Getinge 46-series washer-disinfectors combine hygienic and ergonomic solutions with well-proven tech (more)nology for maximum user safety. Getinge 46-series Washer-Disinfectors offer a large chamber size with a minimal external footprint. Thanks to the built-in heat exchanger, the 46-series dries items effectively on both the inside and outside. Drying time and temperature can be preset for each program via the control panel. The display uses plain language to explain what’s happening in every stage of the washing and disinfecting processes. Simply select one of the six preset programs and press the start button. Wash levels (up to): 4 pcs Chamber volume: 201 L Internal dimensions (WxDxH): 550 x 620 x 590 mm Dimensions (WxDxH): 650 x 690 x 1860 mm

Hersteller: Beckman Coulter Modell: J-26S XP BioSafe Three-Phase Beschreibung: Das J-26S X setzt Maß (more)stäbe in Sachen Leistung, einschließlich hoher Geschwindigkeit, geringer Wärmeabgabe, Unwuchttoleranz und niedrigem Geräuschpegel, und sein breites Spektrum an Trennmöglichkeiten wird noch erweitert, jetzt auch mit dreiphasiger Filtration, die das Schleusenmaterial noch weiter in Feststoffe, Flüssigkeiten und Gase trennt. Der zusätzliche HEPA-Filtersatz (High Efficiency Particle Arrestance) macht das Gerät bio-sicher. Die Zentrifuge J-26S XP verfügt über einen schlagfesteren Deckel, eine vollständige Containment-Barriere und eine automatische Rotorerkennung. Das ergonomische Design - mit niedrigerer Gerätehöhe und freihändiger Türbedienung - bleibt unverändert. Die J-265 XP kann sechs Liter Fermentorleistung in weniger als 10 Minuten verarbeiten, eine subzelluläre Fraktion bei 82.000 x g liefern und 24 Mikrotiterplatten gleichzeitig betreiben. Das Gerät erkennt automatisch, welcher Rotor installiert ist, und verhindert, dass der Rotor seine maximale Drehzahl überschreitet. Es ermöglicht einen schnelleren, leiseren und energieeffizienteren Betrieb mit besserer Temperaturkontrolle. Der exklusive, drehmomentstarke SR-Antrieb (Switched Reluctance) verkürzt die Zykluszeiten. Kernmerkmale: • Verarbeitung von sechs Litern Fermenterleistung in weniger als 10 Minuten • Lieferung einer subzellulären Fraktion bei 82.000 x g • 24 Mikrotiterplatten auf einmal ausführen • Trennen Sie lebende Zellpopulationen mit Elutriation • Sterilfilter verhindern den Austritt von infektiösem Material Technische Daten: Maximale Geschwindigkeit: 26,000 rpm Beschleunigung: Maximal, langsam oder zeitgesteuert (1-10 Minuten, 0-500 U/min) Abbremsung: Maximal, Langsam, Zeitgesteuert (1-10 Minuten von 500-0 U/min) oder Aus Maximale Kapazität Volumenbereich: 1 - 6 L Kältesystem: FCKW-freies, nicht Ozon abbauendes Kältemittel Temperaturbereich(e): 10°C - 40°C in 1-Grad-Schritten Gewicht: 290kg Maße (B x H x T): 71cm x 86cm x 86cm Leistungsanforderungen: 220/380 VAC, 50 Hz, 3 Phasen Luftfeuchtigkeitsbeschränkungen:< 95% (nicht kondensierend) Lieferumfang: - J-26S XP BioSafe Three-Phase ohne Rotor - Bedienungsanleitung als PDF via E-Mail Bei Bedarf eines passenden Roters, helfen wir gerne! Das Gerät befindet sich in einem absoluten Top Zustand und wurde 100%  auf Funktion geprüft.