Liebherr GG 4060 ProfiLine Labor-Gefrierschrank Lab Freezer 348L -9...-26°C

'F' Series - B Medical Systems The 'F' PREMIUM series plasma freezers are instruments of the highest (more) quality and with state-of-the-art functionality. The safety standards developed by B Medical Systems define unique technical characteristics, guaranteeing the safe storage of preparations and establishing the highest safety standards for the user. ACCURATE TEMPERATURE AND GUARDED 24 HOURS - Controlled air cooling system for uniform and stable temperature distribution - Automatic defrost with stable temperature maintenance - Rapid recovery of the temperature even after numerous door openings - Safety thermostat to prevent freezing - Long autonomy in case of power failure - Acoustic and visual alarms with remote notification via SMS or email - °B Connected universal software for remote archive, report (FDA 21 CFR Part 1 compliant EFFICIENCY - US SNAP and F-GAS compliant high efficiency natural gas - High performance and low consumption compressor - Polypropylene chassis with one-piece print guaranteed for life against corrosion and fully recyclable CONVENIENCE - Easy access to parameters via 7' touch-screen - Card reader for reserved entrance or with password - Data export via USB or card reader - Anti-bacterial coating for the best cleaning - Low noise - Low heat emission - Modular internal equipment - Easy access to internal drawers-trays - Highest quality stainless steel - Set Point -41°C F701 plasma freezer - Storage capacity (350ml plasma bags): 575 - Cold/hot temperature alarm limit: -46°C / -32°C - Medical Device according to MDR (EU) 2017/745, Class IIa - Multifunction electronics with 0.1°C touchscreen display and monitoring software - Wide range of functions and accessories MULTIFUNCTION ELECTRONICS FOR MAXIMUM RELIABILITY - Multi-function electronics - Audiovisual alarm system with remote transmission in case of unexpected temperature changes and power failure - Compatible with universal connected '°B Software' for remote monitoring, logging and long-term archiving - Electronic temperature recorder - USB port for easy export of logged data - Data backup battery OPTIMIZED DESIGN FOR ENERGY EFFICIENCY - Thick polypropylene insulation, without corrosion and with perfect thermal insulation, 100% recyclable - Minimized cold air loss - Ecological refrigerant R290 - Ecological footprint reduced to a minimum STRUCTURE IMPROVED AND BUILT FOR EVERLASTING DURABILITY - Corrosion resistant structure guaranteed for life - Built by rotational molding, in high quality polypropylene for better insulation and robustness - No sharp edges for easier maintenance and cleaning - Ergonomic design for safe use at all times The whole line dedicated to the preservation of blood and derivatives: According to: - European Medical Device Regulation: MDR (EU) 2017/745, Class IIa(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - EMC directive: 2014 / 30 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - Low voltage directive: 2014 / 35 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - FDA regulation-Medical Device: 21CFR Part 864.9700, Class II(models: 115-127 V - 60 Hz & 220 V - 60 Hz) - cCSAus certificate: Yes (models: 115-127 V - 60 Hz & 220 V - 60 Hz) - GMP - Clean room classification: Class ISO 6 / EC GMP B Class ISO 5 / EC GMP A

Temperature range: -9°C to -30°C Maximum fluctuation: 4.2°C Maximum gradient: 6.8°C Defrost system:  (more)Manual defrost system Cooling system: Static Capacity: 284 L Dimensions (HxWxD): 1840 x 597 x 615 mm Internal dimensions (HxWxD): 1587 x 420 x 400 mm Weight: 86 kg

Dimensions (HxWxD): 1841 x 660 x 683 mm Internal dimensions drawer (HxWxD): 190 x 465 x 400 mm Capac (more)ity: 305 L

Refrigerator capacity: 142 l Freezer capacity: 54 l Dimensions (H x W x D): 1360 x 550 x 629 mm

Temperature range: -9°C to -30°C Dimensions (HxWxD): 1835 x 590 x 605 mm Internal drawer dimensions  (more)(HxWxD): 170 x 430 x 400 mm Capacity: 284 L

The Frontier 5306 minimizes noise and interruptions in the laboratory: low input voltage power, sile (more)nt brushless motor and a rubber base that absorbs vibrations. Operator safety: rotor imbalance sensor and two safety switches that immediately stop the rotors if the lid remains open during use. Unprecedented ease of use: just place the sample in the centrifuge, close the lid and the centrifuge will start spinning without pressing any buttons. Operation AC power (included) Structure Silent brushless motor, small footprint Construction features Easy to install design Technical features Speed ​​range: 0 rpm – 6.000 rpm Maximum relative centrifugal force: 2.000 g Maximum flow rate (rotor): 8 x 1,5/2,0 ml Program memories: 0 Acceleration gear: 1 Deceleration gear: 2 Lid lock: mechanic Noise level: ≤60 ± 2 dB (A) Rotor Compatibility: Angled 8 x 1.5 / 2.0ml; Angled 4 x 8 PCR strips Execution time: continuous Safety certification: CE; FCC; TUV The Ohaus Frontier 5306 minimizes noise and interruptions in the lab: low input voltage power, a quiet brushless motor, and a vibration-absorbing rubber base. Operator safety: rotor imbalance sensor and two safety switches that stop the rotors immediately if the lid is left open during use. Unprecedented ease of use: just place the sample in the centrifuge, close the lid and the centrifuge will start spinning without the need to press any buttons. The KIT includes two rotors, described below. Maximum relative centrifugal force (x g) at 2,560 g; top speed at 6,000 rpm; tube diameter without adapter 12mm / 2.0ml, 1.5ml; outer/inner radius 45 mm. Maximum relative centrifugal force (x g) at 2,260 g; top speed at 6,000 rpm; tube diameter without adapter 12mm / 2.0ml, 1.5ml; outer/inner radius 32 mm. TECHNICAL FEATURES Speed ​​range: 0rpm – 6,000rpm. Maximum relative centrifugal force: 2,000 g. Maximum flow rate (rotor): 8 x 1.5/2.0ml. Program memories: 0. Rotor Pack: 8 x 1.5ml/2.0ml Angled Rotor; angled rotor 4 x 8 PCR strips. Accelerator gear: 1. Deceleration gear: 2. Screen (2): without display. Lid lock: mechanical. Net weight: 1.1kg. Noise level: ≤60 ±2 dB(A). Rotor Compatibility: Angled 8 x 1.5/2.0ml; angled 4 x 8 PCR strips. Rotor recognition method: not applicable. Runtime: Continuous. Safety Certification: CE; FCC; TUV.

The Bruker LUMOS is a fully automated stand-alone FTIR microscope with an 8x objective and can be us (more)ed in transmission, reflection and ATR mode. The measurement results in a single file including visible images, spectral data and sample information. For evaluation and visualization of the microscopic data the software provides powerful and intuitive Chemical Imaging functionality. The LUMOS is a stand-alone FT-IR microscope with an integrated FT-IR spectrometer perfectly matched into its optical design. All components are motorized and electronically coded. The innovation of a motorized ATR-crystal allows the system to switch from transmission or reflection to ATR mode without interaction of the operator, and to measure fully automated sample and background spectra even in ATR mode. The heart of each FT-IR spectrometer is the interferometer. The LUMOS uses a patented, permanently aligned RockSolid interferometer being extremely insensitive against mirror tilts, vibrations and thermal effects. 8x objective for automated measurements in transmission, reflection and ATR Magnification can be increased to 32x by digital zooming Image capture by highly resolving digital CCD camera Motorized Germanium ATR crystal with internal pressure control Motorized sample stage Motorized z-drive All IR-transparent windows and the IR beam splitter are made of ZnSe providing robustness even against high humidity High sensitive photoconductive MCT detector Including PC with software

Dimensions (LxD): 1500 x 900 mm