Deep freezer U201 B-Medical-Systems

Manufacturer: Binder Model: UF V500 Ultra Low Freezer (-40..-90°C) P/N: 9020-0347 Description: The  (more)BINDER ultra low temperature freezer ensures the safe storage of samples at -90 °C. It combines outstanding environmental friendliness with low energy consumption, convenient operation and an individual safety concept. Benefits - Lowest energy consumption in its class- Environmentally friendly refrigerant- Multi-level safety concept Important characteristics - Range of temperature controller: -90 °C to -40 °C- Lowest energy consumption in its class- Powerful cascade compressor cooling unit- Environmentally friendly refrigerants R-290 and R-170- Efficient thermal insulation with vacuum insulation panels- Innovative door gasket concept reduces buildup of ice- Ergonomic door handle- Rust-proof interior made completely of stainless steel- Detachable inner doors made of stainless steel- 3 stainless-steel shelves providing flexible placement- Water cooling (depending on version)- Zero-voltage alarm contact for in-house alarm system- Ethernet interface- Elapsed time indicato- 2 access ports, Ø 28 mm, rear Specifications:Performance Data Temperature Cooling down time from 22 °C to -80 °C: 360 minTemperature fluctuation at -80 °C: 1.5°CTemperature range: -90…-40Temperature variation at -80 °C: 2.5 °CWarm-up time during power failure from -80 °C / -122 °F to -60 °C / -76 °F: 230 minElectrical data Nominal power: 1.6 kWPhase (Nominal voltage): 1~Power frequency: 50 Hz Rated Voltage: 230 VUnit fuse: 10 AUnit doors: 1 Housing dimensions not incl. fittings and connections Exterior dimensions: (WxHxD) 938 x 1966 x 826 mm Interior dimensions: (WxHxD) 605 x 1300 x 606 mm  Interior volume: 477LNet weight of the unit (empty): 247kgPermitted load: 200kgPermitted load of individual compartment: 50kgWall clearance back: 100 mmWall clearance sidewise: 250 mmEnvironment-specific data Energy consumption at set-point -80 °C and ambient temperature = 21 °C: 7.9kWh/dSound-pressure level: 47dB(A) Number of shelves (std./max.): 3 / 13Load-variants Cryoboxes, 50 mm: 352Freezer racks per compartment: 4 Itemds delivered: - Binder UF V500 Ultra Low Freezer  - Instruction Manual The Binder UF V500 Freezer is new and has never been used in lab environment.Ready for it's first duty.

Refurbished - 6 months warranty. Features: - Natural refrigerant - Touchscreen user interface - Whis (more)per-quiet operation - Less footprint - Particularly high temperature accuracy Technical specifications: - Volume: 949 liters - Temperature range: -50°C to -86°C - External dimensions (WxDxH): 1148 x 955 x 1981 mm - Internal dimensions (WxDxH): 1016 x 719 x 1301 mm - Weight: 353 kg

- Storage capacity (cryobox): 150 - Storage capacity (2ml vials): 15,000 - 350 ml plasma bags: 150 - (more) Preset temperature: -82°C - Cold/hot temperature alarm limit: -87°C / -77°C Ultra low freezers, or deep freezers, are devices intended for storing blood and plasma components, human cells, tissues and other laboratory samples at temperatures as low as -86°C. "U" models reflect the highest and most uncompromising requirements with state-of-the-art technology. The cooling system is optimally designed to allow very low consumption and little heat production. Medical device in accordance with MDR (EU) 2017/745, Class IIa directive THE CONTROL PANEL Extremely easy control of all parameters: - 7" color touchscreen display at eye level - Locking mechanism protected by card reader and password - Audio-visual alarm system with remote transmission in case of unexpected temperature changes and power failure - B Universal connected software for remote monitoring, recording and long-term archiving - USB port for easy data export - Alarm memory and history on the monitor with indication of the type - Ethernet interface for data management, via B software, to a PC - Backup battery (duration of at least 48 hours) - Optionally, the possibility of passing data to a db through the network. - Monitor indication of: time, input Volt, login status (user level) SAFETY AND TRANQUILITY Accurate temperature and 24-hour storage: The safety standards developed by B Medical Systems define unique technical features, ensuring the safe storage of preparations and setting the highest safety standards for the user. - Controlled air cooling system for a uniform and stable temperature distribution - Automatic defrost while maintaining a stable temperature - Rapid temperature recovery even after numerous door openings - Safety thermostat to prevent freezing - Long range in case of power failure - Audible and visual alarms with remote alert via SMS or email - °B Connected universal software for remote archive, report (according to FDA 21 CFR Part 1) More than certified tools - European regulation on medical devices: MDR (EU) 2017/745, Class IIa (models: 220-240 V - 50/60 Hz and 230 V - 50 Hz) - EMC Directive: 2014/30 / EU (models: 220-240 V - 50/60 Hz and 230 V - 50 Hz) - Low voltage directive: 2014/35 / UE (models: 220-240 V - 50/60 Hz and 230 V - 50 Hz) - FDA-Medical Device Regulations: 21CFR Part 864.9700, Class II (models: 115-127 V - 60 Hz and 220 V - 60 Hz) - CCSAus certified: Yes (models: 115-127V - 60Hz and 220V - 60Hz) - GMP - Clean room classification: ISO class 6 / EC GMP B ISO class 5 / EC GMP A The 'PREMIUM' line provides you with the most advanced tool you can find. The maximum of technology that you will be able to receive in your laboratory or research center, as well as for the pharmacy and hospital. These models will not serve you best today, but for decades they will remain advanced and modern tools. Tens of years of experience in the design, construction and use, in all conditions, have allowed B Medical Systems to be able to create some of the best instruments on the market. By purchasing this instrument manufactured in Luxembourg, you will save energy each day on the time used for your applications, without risking losing your precious samples. Optimized design for energy efficiency - Often polypropylene insulation, without corrosion and with perfect thermal insulation, 100% recyclable - Minimized cold air loss - Ecological refrigerant R290 - Ecological footprint reduced to a minimum Improved structure and built for everlasting durability - Anti-corrosion structure guaranteed for life - Constructed by rotational molding, in high quality polypropylene for better insulation and strength - No sharp edges for easier maintenance and cleaning - Ergonomic design for safe use at all times - Double internal door RTMD | DATI SEMPRE ONLINE WANT EVEN MORE CONTROL? As an option, you can connect your B-Medical-Systems devices to the °B CONNECTED online software. Through this software, via PC or smartphone, you will be able to have a complete overview and management of all your B-Medical-Systems instruments. - Real-time data: temperature, set point, component status, compressor data - All recorded data: alarms, temperatures, exceptional events that occurred during refrigeration - Display and settings of all parameters - Graphic display of temperature curves - Easy graphics to monitor all the devices you own - Incredibly interactive - Customizable data printing - Easy setting of specific alarms, via email or SMS alerts - Data export for third party software - Important advantage in terms of costs compared to a traditional circular paper recorder FEATURES OF VALUE EFFICIENCY - High efficiency natural gas compliant with US SNAP and F-GAS - High performance and low consumption compressor - One-piece printed polypropylene chassis guaranteed for life against corrosion and fully recyclable - Superior insulation - Ergonomic handle with special valve to open the instrument with minimum effort. CONVENIENCE AND COMFORT - Easy access to parameters via 7 'touch-screen - Card reader for reserved entrance or with password - Data export via USB or card reader - Anti-bacterial coating for better cleaning - Low noise - Low heat emission - Modular interior equipment - Easy access to the internal drawers-trays - Highest quality stainless steel - Minimal ice formation to allow easy defrosting MULTIFUNCTION ELECTRONICS - Maximum reliability - Audio-visual alarm system with remote transmission in case of unexpected temperature changes and power failure - Compatible with universal '° B Software' connected for remote monitoring, recording and long-term archiving - Electronic temperature recorder - USB port for easy export of recorded data - Data backup battery Versatile and modular - Full compatibility of internal modules and rails - no need to buy new racks, you can keep previously used racks in different U models - Cryo racks optional ... and much more. Download the data sheet for the data of each model, the standard and optional accessories.

'F' Series - B Medical Systems The 'F' PREMIUM series plasma freezers are instruments of the highest (more) quality and with state-of-the-art functionality. The safety standards developed by B Medical Systems define unique technical characteristics, guaranteeing the safe storage of preparations and establishing the highest safety standards for the user. ACCURATE TEMPERATURE AND GUARDED 24 HOURS - Controlled air cooling system for uniform and stable temperature distribution - Automatic defrost with stable temperature maintenance - Rapid recovery of the temperature even after numerous door openings - Safety thermostat to prevent freezing - Long autonomy in case of power failure - Acoustic and visual alarms with remote notification via SMS or email - °B Connected universal software for remote archive, report (FDA 21 CFR Part 1 compliant EFFICIENCY - US SNAP and F-GAS compliant high efficiency natural gas - High performance and low consumption compressor - Polypropylene chassis with one-piece print guaranteed for life against corrosion and fully recyclable CONVENIENCE - Easy access to parameters via 7' touch-screen - Card reader for reserved entrance or with password - Data export via USB or card reader - Anti-bacterial coating for the best cleaning - Low noise - Low heat emission - Modular internal equipment - Easy access to internal drawers-trays - Highest quality stainless steel - Set Point -41°C F701 plasma freezer - Storage capacity (350ml plasma bags): 575 - Cold/hot temperature alarm limit: -46°C / -32°C - Medical Device according to MDR (EU) 2017/745, Class IIa - Multifunction electronics with 0.1°C touchscreen display and monitoring software - Wide range of functions and accessories MULTIFUNCTION ELECTRONICS FOR MAXIMUM RELIABILITY - Multi-function electronics - Audiovisual alarm system with remote transmission in case of unexpected temperature changes and power failure - Compatible with universal connected '°B Software' for remote monitoring, logging and long-term archiving - Electronic temperature recorder - USB port for easy export of logged data - Data backup battery OPTIMIZED DESIGN FOR ENERGY EFFICIENCY - Thick polypropylene insulation, without corrosion and with perfect thermal insulation, 100% recyclable - Minimized cold air loss - Ecological refrigerant R290 - Ecological footprint reduced to a minimum STRUCTURE IMPROVED AND BUILT FOR EVERLASTING DURABILITY - Corrosion resistant structure guaranteed for life - Built by rotational molding, in high quality polypropylene for better insulation and robustness - No sharp edges for easier maintenance and cleaning - Ergonomic design for safe use at all times The whole line dedicated to the preservation of blood and derivatives: According to: - European Medical Device Regulation: MDR (EU) 2017/745, Class IIa(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - EMC directive: 2014 / 30 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - Low voltage directive: 2014 / 35 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - FDA regulation-Medical Device: 21CFR Part 864.9700, Class II(models: 115-127 V - 60 Hz & 220 V - 60 Hz) - cCSAus certificate: Yes (models: 115-127 V - 60 Hz & 220 V - 60 Hz) - GMP - Clean room classification: Class ISO 6 / EC GMP B Class ISO 5 / EC GMP A

PRECISION LABORATORY REFRIGERATOR manufactured by B Medical System PRECISION REFRIGERATOR FOR PHARMA (more)CIES (glass door) produced by B Medical System SECURITY AND PEACE OF MIND - Forced air cooling system for uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Safety thermostat that prevents the internal temperature from going below zero - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - Optional °B Connected universal software for remote monitoring, reporting (in compliance with FDA 21 CFR Part 11) and archiving long term in combination with a data communication unit CONSTRUCTION AND TECHNOLOGY TO INCREASE THE EFFICIENCY OF THE REFRIGERATOR - Natural refrigerant with high cooling efficiency compliant with US SNAP and EU F-Gas regulations - Polypropylene structure injected with polyurethane foam that provides strong thermal insulation - 4-layer PMMA organic glass door offering maximum insulation, combined with weight reduction to reduce door closing efforts - Automatic internal LED lighting for lower energy consumption - Monobloc structure made with the exclusive rotational molding technique COMFORT OF USE AND DURABILITY - Smooth cleanable surfaces - Silent device - Low heat emission - Modular internal equipment - Easy data export to USB - Electronics with easily accessible temperature display - Heated gasket to minimize condensation - Corrosion resistant construction with lifetime warranty The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical data sheet in Italian or in English for all the details.

'F' Series - B Medical Systems The 'F' PREMIUM series plasma freezers are instruments of the highest (more) quality and with state-of-the-art functionality. The safety standards developed by B Medical Systems define unique technical characteristics, guaranteeing the safe storage of preparations and establishing the highest safety standards for the user. ACCURATE TEMPERATURE AND GUARDED 24 HOURS - Controlled air cooling system for uniform and stable temperature distribution - Automatic defrost with stable temperature maintenance - Rapid recovery of the temperature even after numerous door openings - Safety thermostat to prevent freezing - Long autonomy in case of power failure - Acoustic and visual alarms with remote notification via SMS or email - °B Connected universal software for remote archive, report (FDA 21 CFR Part 1 compliant EFFICIENCY - US SNAP and F-GAS compliant high efficiency natural gas - High performance and low consumption compressor - Polypropylene chassis with one-piece print guaranteed for life against corrosion and fully recyclable CONVENIENCE - Easy access to parameters via 7' touch-screen - Card reader for reserved entrance or with password - Data export via USB or card reader - Anti-bacterial coating for the best cleaning - Low noise - Low heat emission - Modular internal equipment - Easy access to internal drawers-trays - Highest quality stainless steel - Set Point -41°C F501 plasma freezer - Storage capacity (350ml plasma bags): 460 - Cold/hot temperature alarm limit: -46°C / -32°C - Medical Device according to MDR (EU) 2017/745, Class IIa - Multifunction electronics with 0.1°C touchscreen display and monitoring software - Wide range of functions and accessories MULTIFUNCTION ELECTRONICS FOR MAXIMUM RELIABILITY - Multi-function electronics - Audiovisual alarm system with remote transmission in case of unexpected temperature changes and power failure - Compatible with universal connected '°B Software' for remote monitoring, logging and long-term archiving - Electronic temperature recorder - USB port for easy export of logged data - Data backup battery OPTIMIZED DESIGN FOR ENERGY EFFICIENCY - Thick polypropylene insulation, without corrosion and with perfect thermal insulation, 100% recyclable - Minimized cold air loss - Ecological refrigerant R290 - Ecological footprint reduced to a minimum STRUCTURE IMPROVED AND BUILT FOR EVERLASTING DURABILITY - Corrosion resistant structure guaranteed for life - Built by rotational molding, in high quality polypropylene for better insulation and robustness - No sharp edges for easier maintenance and cleaning - Ergonomic design for safe use at all times The whole line dedicated to the preservation of blood and derivatives: According to: - European Medical Device Regulation: MDR (EU) 2017/745, Class IIa(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - EMC directive: 2014 / 30 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - Low voltage directive: 2014 / 35 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - FDA regulation-Medical Device: 21CFR Part 864.9700, Class II(models: 115-127 V - 60 Hz & 220 V - 60 Hz) - cCSAus certificate: Yes (models: 115-127 V - 60 Hz & 220 V - 60 Hz) - GMP - Clean room classification: Class ISO 6 / EC GMP B Class ISO 5 / EC GMP A

The first hot plate stirrer with embedded Wi-Fi technology Wherever you are, VELP Ermes allows the r (more)eduction of routine operations thanks to the real-time control of your AREX-6 Connect PRO. Access your analyzes from PC, Pad or smartphone, to maximize the productivity and reproducibility of your reactions. Immediate notifications and alerts will allow you to always be informed and thanks to the remote interruption you will have total control of your processes. SAFETY FIRST AREX-6 Digital PRO is equipped with 2 independent temperature reading circuits that protect the instrument in the event of a malfunction of one of the two. If the probe is not inserted into the sample being analyzed, the instrument stops heating, showing a safety message on the display. AREX-6 Digital PRO is equipped with the most advanced technology and allows you to set the maximum temperature limit required for analyzes with specific temperatures. The Lock function prevents inadvertent changes to settings by locking the instrument. CerAlTop™, High Resistance The CerAlTop™ plate, made of aluminum alloy covered with a ceramic layer, guarantees a homogeneous and fast heat transfer over the entire surface. Furthermore, the thin ceramic layer protects the straightener from scratches and chemicals. CUTTING-EDGE THERMOREGULATION AREX-6 Digital PRO offers the best thermoregulation available. The PID thermoregulation system guarantees stable, fast temperature control with minimal overshoot. VTF and Pt100 probe allow accurate and precise temperature control. It is possible to choose between 2 different thermoregulation modes: - FAST: The set temperature is reached quickly. - FINE: The set temperature is reached slowly, minimizing overshoot. UNPRECEDENTED PERFORMANCE The brushless motor allows you to shake up to 20 liters at an adjustable speed from 30 to 1700 rpm. Thanks to the SpeedServo™ system, the speed is kept constant even when the viscosity varies. The Alnico magnet guarantees homogeneous agitation, even in the peripheral areas of the plate and a powerful magnetic coupling between motor and stir bar, a very important aspect when using accessories. MAXIMUM INSTRUMENT PROTECTION AREX-6 Digital PRO is an IP42 product designed to guarantee years of use and resistance in the laboratory. The structure and materials protect the internal parts of the instrument from possible damage. AREX-6 Digital PRO is guaranteed for 3 years. The silicone cover ensures further protection of the instrument from possible spills or splashes. Technical characteristics - Speed ​​regulation precision: 5 rpm. - Temperature regulation resolution: 1°C. - Connection for digital thermoregulators: VTF / VTF EVO. - Probe connection: Pt100. - Sample thermoregulation: ±0.5°C (VTF / VTF EVO) ±1°C (PT100). - Automatic reverse rotation: yes. - Probe detector: yes. - Lock function: yes. - Hot surface warning: on display. - Heating activation button: yes. NEW INTERFACE - EASY USE Bright LED display and intuitive icons. The icons will show you: probe or thermoregulator connection, heating activation, reaching the set temperature, timer activation and rotation reversal. The speed and temperature are set by the sensitive knobs, and are activated only after they are pressed. AREX-6 Digital PRO is equipped with an advanced menu that allows you to configure the instrument with the features that best suit the needs of the individual laboratory. INTEGRATED TIMER AND ROTATION REVERSE The central button allows you to set the timer from 1min to 99h59min. You can set the timer in 2 different modes: - Snap: The timer starts counting down as soon as a function is activated (stirring or heating). - SetP: The timer starts counting down as soon as the set temperature is reached. Furthermore, it is possible to set the rotation reversal at time intervals. ACCESSORIES OIL BATH AND HEATING MANTELS REPLACED WITH SPHERICAL CAPS The new Spherical Caps are the perfect solution for replacing oil baths and heating mantles. Furthermore, they adapt perfectly to both the 135 mm plate diameter and the shape of the tubes allowing a fast heat transfer from the plate to the tube. To increase protection and reduce thermal dispersion, VELP has designed the new PTFE Covers. GREATER VERSATILITY The MultiAlublock™ and the new MonoAlublock™ made of aluminium, are ideal for carrying out numerous stirring and heating analyses, reducing time and space in the laboratory. - MonoAlublock™ are the ideal solution for all those applications that require analysis in tubes of the same size. - MultiAlublock™ are modular and of different types to support various tube sizes. Thanks to their modularity, it is possible to choose the mix that best suits your needs.

Demo centrifuge. Unused - original packaging. Warranty until 08/2024. Technical data: - Temperature  (more)range: -10 °C to +40 °C - Max. rotational speed: 15200 rpm - Min. rotational speed: 300 rpm - Dimensions (WxDxH): 550 x 670 x 840 mm Delivery scope: - Thermo Scientific SL 40FR refrigerated centrifuge, Mfr. PN: 75004543 - TX-750 rotor, anti-friction layer, Mfr. PN: 75003180 - TX-750 cups (4 piece Set), Mfr. PN: 75003608 - Adapter, 50 ml conical, Mfr. PN: 75003638

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Thermo Dionex ASRS 300 2 mm Self-Regenerating Suppressor Dionex reference: 064555 Year of manufactur (more)e: 2012 Never used