Arctiko LF 650 -25 C / -10 C Upright Biomedical Freezer

LABORATORY FREEZER manufactured by B Medical Systems Design and comfort of use - 7” touchscreen with (more) easily accessible temperature display in the door handle - Minimal ice formation allowing for easy defrosting - NFC card/password protected door lock mechanism - USB port and SD card slot for easy export of -41°C setpoint data - Modular internal equipment - Easy access to lower drawers - High quality stainless steel and other materials for durability Accurate temperature control and 24/7 monitoring - Uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Intelligent automatic defrost technology that allows for a stable temperature during the defrost cycle - Automatic shutdown of the evaporator fans each time the door is opened to reduce heat transmission - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - °B Universal software option for remote monitoring; reporting in accordance with FDA 21 CFR Part 11 and long-term archiving in combination with a data communication unit Energy efficient and eco-friendly performance - High cooling efficiency thanks to natural refrigerants in compliance with US SNAP and EU F-Gas regulations - Insulated interior doors, sealed gaskets, improved frame to minimize cold air loss and heat conduction - Frost prevention which reduces the pressure on the compressor - High quality stainless steel structure with antibacterial coating and injected polyurethane foam that provides high thermal insulation and storage capacity The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical sheet in Italian or in English for all the details.

Dimensions (WxDxH): 140 x 140 x 745 mm Compartment dimensions (WxDxH): 135 x 135 x 55 (x13) mm

Liebherr Comfort Freestanding Freezer This item was removed from a university lab where it was surpl (more)us to requirements. Apart from the absence of its handle, this item is in fairly good cosmetic condition. The unit powers up and is in full working order. It was tested with a digital thermometer (not included).

*Description reads: Reasonable cosmetic condition - appears to be in very good condition other than  (more)one tape mark* Panasonic Model MDF-U443-PE Biomedical Freezer Lab This item was removed from a university where it was surplus to requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition. Features: 5 x Shelves: 53 x 61 cm

PHCBI Biomedical -30°C Freezer Model: MDF-MU539HL-PE Lab This item was removed from a university whe (more)re it was surplus to requirement. The unit powers up and is in good working order (thermometer not included). Last Service Date: 18-01-2024Service Engineer Email: [email protected]

Stirling Ultracold SU105UE Ultra-Low Undercounter FreezerFeatures - Advanced Stirling engine reliabi (more)lity maximizes sample storage in a compact footprint without sacrificing performance - Upright design can be stacked or placed undercounter for convenient access when space is limited - Perfect for controlled temperature transitioning within the widest range of set point temperatures, -20°C to -86°C - Lowest energy consumption in its class for greater operational savings, <4 kWh/day at -80°C - Universal power adaptation accepts electrical input from any outlet, around the world - Optional SenseAnywhere wireless temperature logging allows for remote monitoring via cloud-based software - Environmentally friendly design uses only 100% natural refrigerants - Designed for ultra-low power consumption and maximal energy savings - Virtually eliminates any need for maintenance with breakthrough Stirling free-piston engine - Uses 100% natural refrigerants for reduced climate impact for cooling The Stirling Ultracold SU105UE Ultra-Low Undercounter Freezer is a compact ultra-low temperature freezer that is ideal for personal storage and situations where larger volume ULT freezers might otherwise remain half empty. The SU105UE delivers full performance ultra-low storage for undercounter, benchtop or stacked installation. These undercounter freezers feature a 105L (3.7 cu. ft.) cabinet that delivers stable, uniform -20°C to -86°C storage at a fraction of the operating cost of conventional cascade refrigeration systems. The SU105UE combines the performance of a unique free-piston Stirling engine with an efficient, thin-wall, non-CFC urethane foam and vacuum insulated cabinet. This permits high-performance, ultra-low temperature storage capacity in an undercounter, benchtop, or stacked cabinet configuration. The Stirling integral control, alarm, and monitoring system includes an intuitive graphic user interface to display operating temperature, reserve cooling capacity, status functions, and performance metrics for field troubleshooting. Secure touchpad inputs permit access to and programming for all control functions and alarm setpoints. Using 100% natural refrigerants, the Stirling Ultracold SU105UE Undercounter Freezer stores more samples in a smaller footprint than comparable models. INCLUDED: The Stirling Ultracold SU105UE Ultra-Low Undercounter Freezer includes: - 1 Shelf - Power Cord - Operator's Manual - Full 6 Month Parts and Labor Warranty Stirling Ultracold SU105UE Ultra-Low Undercounter Freezer SpecificationsTemperature Range-20°C to -86°C, adjustable in 1°C incrementsVolume105L (3.7 cu. ft.)Cooling EngineHelium charged free-piston Stirling engine with continuous modulationHeat Transport SystemGravity driven thermosiphonRefrigerantR-170 (Ethane) 30-33 gramsEvaporatorCold wall (inner liner)Heat RejectionFinned heat exchanger with forced air coolingAir inlet: above freezer door, below mechanical compartmentAir outlet: underneath or rear right corner bottomDefrost MethodManualController TypeMicroprocessor with touchscreen input and displayWarm and Cold AlarmsFully adjustable by userTemperature Log30 days available graphicallyBattery Back-up12-hour control battery back-up for touchscreenEnergy Use4 kWh/day at -80°CPull Down from 25°C Ambient9 hours to -80°C (empty cabinet)Recovery from Door Opening40 minutes to -80°CWarm-up Profile2 hours to -60°C at -80°C (empty cabinet)5.2 hours to -40°C at -80°C (empty cabinet)Heat Dissipation563 BTU/hr (load to HVAC) at -80°C (empty cabinet)Interior Dimensions (H x D x W)21 x 17 x 18 in. (53.3 x 43.2 x 45.7 cm)Exterior Dimensions (H x D x W)34 x 28 x 27 in. (86.4 x 71.1 x 68.6 cm)Weight220 lb. (100 kg.)Electrical Requirements100 - 240V, 50/60Hz, 300W

Hybaid Maxi 14 Rotisserie Shaking Hybridisation Oven This was removed from a university lab where it (more) was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks. Shaking platform 33 x 33cmInternal dimensions 35 x 32 x 51cmRotisserie 10 x 35mm bottles

HRP EX Platform Wherever high readability and precision are important. Wherever good repeatability i (more)n harsh industrial conditions matters. HRP EX Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others HRP EX Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment HRP EX Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential HRP EX Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

E2-class mass standards represent an exceptional standard of precision in mass measurement. Classed  (more)as E2 metrology class, they are characterized not only by their high accuracy, but also by their versatility for use in laboratories, industry or scientific research. Key features: High precision measurements Stability over Time Calibration and Strict Quality Control Versatility of Applications Cylindrical shape Nominal value: 2 g

It is the ideal solution for laboratories and institutions requiring the highest precision. The cyli (more)ndrical mass standards are made from the highest quality materials, ensuring their stability and resistance to changes in environmental conditions. This makes them perfect for the calibration of precise measuring instruments. Product Features: Highest Class of Accuracy: Class E1 is the highest standard of accuracy, making these standards ideal for calibrating precision measuring instruments. Cylindrical Shape: The cylindrical shape of the standards ensures ease of handling and precise placement on weighing platforms. Wooden Packaging: The standards are delivered in an elegant wooden box, which ensures their safe storage and transport. Set Includes: 16 mass standards, 2 pairs of tweezers, 2 brushes and 1 pair of gloves. Applications E1 class standards are ideal for the calibration and verification of precise analytical and laboratory balances, indispensable in metrology laboratories, as well as in research and industrial institutions where maintaining the highest standards of accuracy is necessary. By choosing the E1 class mass standard set from RADWAG, you invest in reliability, precision, and durability, which translates to excellent quality in your laboratory work.

KNF SIMDOS 10 IP65 UFEM 1.10 FT.18RC2 Diaphragm Liquid Dosing Pump Flow Rate Range 1 to 100 ml/min  (more)Programmable Dosing 1 to 999 ml Maximum Suction Height 3 mWg Features - Small footprint - Simple, intuitive operation - Manual, analog control - Self-priming, can run dry - Consistent, reliable flow rate - Simple calibration - Cycle mode - Adaptable to fluid characteristics - Start/Stop through logic control (TTL) - Reset/Prime through logic control (TTL) - Output signal fault alarm The KNF SIMDOS 10 IP65 UFEM 1.10 FT.18RC2 Diaphragm Liquid Dosing Pump is liquid dosing/metering diaphragm pump. Offers wetted material combinations for optimal chemical resistance. Equipped with manual, analog, and RS-232 controls with LCD graphic display. INCLUDED: The KNF SIMDOS 10 IP65 UFEM 1.10 FT.18RC2 Diaphragm Liquid Dosing Pump includes: - Connection Kit (Hose and Screw-in Fittings) - Remote Control Cable - Filter - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Accuris Analytical Balance, 210 Grams Accuris Analytical balances incorporate electromagnetic sensor (more) technology and precision mechanical components to offer superior weight determinations to a fraction of a milligram. Two capacity ranges are available in the Analytical Balance line to weigh samples up to 120g or 210g. Readability for both ranges is 0.0001g (0.1mg), with accuracy and linearity specifications that match up with the top brands in the industry. The W3100 balances tare and stabilize quickly to provide immediate results. Both ranges offer an optional “Quick-Cal” internal calibration feature that allows quick and convenient calibration without the need for a calibration standard weight. The glass draft shield enclosing the weighing chamber has sliding doors on the sides and top for easy access to the weigh pan. Leveling feet on the rear of the balance extend laterally to provide stability, and a sensitive leveling bubble aids in the leveling process. The Accuris analytical balances have feature-rich software with different modes available for basic weighing in grams, ounces or carats, piece count weighing, determining percent deviation, and also check weighing for component inspection. The large, backlit LCD control panel is easy to see and easy to use. INCLUDED: The Accuris Analytical Balance, 210 Grams includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty