Labconco Dry Ice Benchtop Freeze Dryer -75°C, -103°F

Labconco 794001010 FreeZone 2.5L -85C Triad Benchtop Freeze Dryer 230V, 60Hz Collector Temperature  (more) -85°C Water Removal Over 24 Hours 1.84L Ice Holding Capacity 2.5L Features - Stainless steel collector coil capable of removing 1.84 L of water in 24 hours and holding 2.5 L of ice before defrosting - Two 1/3 HP HCFC/CFC-free refrigeration compressors cool the collector to -85°C (-121°F) and work in concert with a 1000-watt heater to cool and heat fluid medium circulating through channels in the shelf. Not for use with samples containing methanol or ethanol - Processing shelf, 12.4" w x 14.5" d (31.5 x 36.8 cm). Spacing between shelf and top of chamber accommodates containers with stoppers up to 148 mm maximum height - One probe for monitoring temperature of sample in chamber - Temperature ramp and hold programming from -55°C to +50°C (-67°F to +122°F) and -75°C (-103°F) during pre-freezing. Controls temperature to ±1°C of set point. Memory to store 30 programs with 16 segments each including number of steps, ramp rate, shelf temperature, hold time and vacuum level - Full color, 5" capacitive touchscreen featuring Lyo-Works™ OS with real time display of collector temperature and vacuum level - Manual start-up buttons for collector and shelf temperature control and vacuum pull down - Alerts, diagnostic tests, user manual and defrost control - Stoppering control knob, vacuum release control knob and 1/8" OD user-supplied sterile/inert gas backfill port - Four left side-mounted neoprene valves with molded plastic knobs and fittings that accommodate 1/2" and 3/4" flask adapters - USB port, ethernet connection, and electrical receptacle for vacuum pump - Hot gas defrost with stainless steel drain pan, silicone drain hose and auto shut off at +60°C (+140°F) - Clear acrylic door, 1" thick, with silicon gasket and latch 3/4" OD vacuum connection. 36" long, 3/4" ID vacuum hose with two clamps The Labconco 794001010 FreeZone 2.5L -85C Triad Benchtop Freeze Dryer is designed for multiple types of lyophilization: flask, bulk and stoppering vials. With the ability to freeze dry samples in so many different forms, the Triad's versatility and compact design make it perfect for busy labs. The upright stainless steel collector coil holds 2.5 liters of ice before defrosting. Two 1/3 hp HCFC/CFC-free refrigeration compressors cool the collector to -85°C (-121°F), suitable for aqueous or dilute acetonitrile samples. Temperature-controlled shelves range from -55°C to +50°C (-67°F to +122°F) and a maximum of -75°C (-103°F) during pre-freezing. The shelves provide pneumatic stoppering with a diaphragm, eliminating the need for compressed gas. Lyo-Works™ OS provides a real time display of collector temperature and vacuum level, shown on a 5" full color, capacitive touchscreen. A stoppering tray dryer and four valve ports are built in. INCLUDED: The Labconco 794001010 FreeZone 2.5L -85C Triad Benchtop Freeze Dryer 230V, 60Hz includes: - Vacuum Hose - 2 x Hose Clamps - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco 711211010 FreeZone 12L -84C Complete Freeze Dryer System Features - Patented moisture senso (more)rprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Bundle includes a multiport drying chamber comprised of 304 stainless steel. Drying Chambers provide a means to attach a flask to your freeze dryer or contain samples in bulk. Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. The included Edwards RV rotary vane pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. The Labconco 711211010 FreeZone 12L -84C Complete Freeze Dryer System includes the Labconco 711211010 FreeZone 12L -84C Complete Freeze Dryer with stainless steel coil and collector, Labconco 7522900 16-Port Drying Chamber, and an Edwards RV8 Vacuum Pump. The Labconco 711211010 FreeZone 12L -84C Complete Freeze Dryer with stainless steel coil and collector is designed for lyophilizing moderate to large sample loads or numerous small container batches. The console features a front viewing window, interior space for a vacuum pump, and accommodation for a large tray dryer such as the FreeZone Stoppering Tray Dryers (pump and tray dryer sold separately). These models offer the broadest range of built-in options including a shell freezer. The upright stainless steel collector coil holds 6 liters of ice before defrosting. A single 3/4 hp HCFC/CFC-free refrigeration system cools the collector to -84° C (-119F), suitable for aqueous samples. The Labconco 7522900 16-Port Drying Chamber includes 16 neoprene valves with plastic knobs that accommodate both 1/2" and 3/4" adapters for connection of flasks, a 3/4" thick arcylic lid with neoprene gasket, and one latching pin. Made of type 304 stainless steel. It is compatible with FreeZone 1, 2.5, 4.5, 6, 8, 12 or 18 Liter Freeze Dryers. Drying Chambers provide a means to attach flasks to your freeze dryer or contain samples in bulk. The Edwards RV8 rotary vane pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. INCLUDED: The Labconco 711211010 FreeZone 12L -84C Complete Freeze Dryer System includes: - Labconco 711211010 FreeZone 12L -84C Complete Freeze Dryer with Stainless Steel Coil and Collector - Labconco 7522900 16-Port Drying Chamber - Edwards RV8 Vacuum Pump - All Vacuum Tubing - Edwards EMF 20 Mist Filter - Pump Oil - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco FreeZone 6L -50C Console Freeze Dryer with Stoppering Tray Dryer and stainless steel coil a (more)nd collector Features - Patented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 6 Liter Console Freeze Dryers with Stoppering TrayDryers are designed for lyophilizing moderate to large loads and stopperingvials or serum bottles under vacuum. The console features a front viewingwindow and interior space for a vacuum pump (sold separately). The console'supright stainless steel collector coil holds 6 liters of ice before defrosting.A single 3/4 hp HCFC/CFC-free refrigeration system cools the collector to -50°C (-58F), suitable for aqueous samples. The Stoppering Tray Dryer featuresthree 16.5" x 12" processing shelves. A single 1 hp HCFC/CFC-freerefrigeration system and 1000-watt electric heater cool and heat the fluidmedium circulating through channels in the shelves. Lyo-Works™ OS provides areal time display of freeze dryer and tray dryer parameters on a 5" fullcolor, capacitive touch screen. Models with PTFE-coated collectors that canwithstand corrosive compounds are available.Features Upright stainless steel collector coil holds 6L of ice before defrosting Features include hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection. The console provides interior space for vacuum pump (sold separately) Lyo-Works OS provides real time display of collector temperature and vacuum level One-touch data logging and display provides information to maximize sample quality and minimize run time Customizable settings include language, time zone, temperature and vacuum FreeZone™ exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run. FreeZone™ Stoppering Tray Dryer provides precise control and program flexibility for consistent performance. INCLUDED: The Labconco 700621000 FreeZone 6L -50C Console Freeze Dryer with Stoppering Tray Dryer and stainless steel coil and collector 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco FreeZone 6L -50C Console Freeze Dryer with PTFE coil and collector, Purge Valve & Shell (more) FreezerFeatures - Patented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 6 Liter Console Freeze Dryers are designed forlyophilizing moderate to large sample loads or numerous small containerbatches. The console features a front viewing window, interior space for avacuum pump, and accommodation for a large tray dryer such as the FreeZoneStoppering Tray Dryers (pump and tray dryer sold separately). These modelsoffer the broadest range of built-in options including a shell freezer. Theupright stainless steel collector coil holds 6 liters of ice before defrosting.A single 3/4 hp HCFC/CFC-free refrigeration system cools the collector to -50°C (-58F), suitable for aqueous samples. Lyo-Works™ OS provides a real timedisplay of collector temperature, vacuum level and optional End-Zone™ end pointdetection system, shown on a 5" full color, capacitive touch screen.Models with PTFE-coated collectors that can withstand corrosive compounds areavailable.Features Upright stainless steel collector coil holds 6 liters of ice before defrosting Lyo-Works OS provides a real time display of collector temperature and vacuum level Flexible programming and control of optional drying accessories Optional End-Zone™ end point detection for flask freeze drying One-touch data logging and display provides information to maximize sample quality and minimize run time Front viewing window makes monitoring vacuum pump oil hassle free FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run INCLUDED: The Labconco 700612300 FreeZone 6L -50C Console Freeze Dryer with PTFE coil and collector, Purge Valve & Shell Freezer 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco FreeZone 6L -50C Console Freeze Dryer with stainless steel coil and collector, Purge Valve  (more)& Shell FreezerFeatures - Patented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 6 Liter Console Freeze Dryers are designed forlyophilizing moderate to large sample loads or numerous small containerbatches. The console features a front viewing window, interior space for avacuum pump, and accommodation for a large tray dryer such as the FreeZoneStoppering Tray Dryers (pump and tray dryer sold separately). These modelsoffer the broadest range of built-in options including a shell freezer. Theupright stainless steel collector coil holds 6 liters of ice before defrosting.A single 3/4 hp HCFC/CFC-free refrigeration system cools the collector to -50°C (-58F), suitable for aqueous samples. Lyo-Works™ OS provides a real timedisplay of collector temperature, vacuum level and optional End-Zone™ end pointdetection system, shown on a 5" full color, capacitive touch screen.Models with PTFE-coated collectors that can withstand corrosive compounds areavailable. Features Upright stainless steel collector coil holds 6 liters of ice before defrosting Lyo-Works OS provides a real time display of collector temperature and vacuum level Flexible programming and control of optional drying accessories Optional End-Zone™ end point detection for flask freeze drying One-touch data logging and display provides information to maximize sample quality and minimize run time Front viewing window makes monitoring vacuum pump oil hassle free FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run INCLUDED: The Labconco 700611300 FreeZone 6L -50C Console Freeze Dryer with stainless steel coil and collector, Purge Valve & Shell Freezer 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco FreeZone 6L -50C Console Freeze Dryer with stainless steel coil and collector, Purge Valve  (more)& Mini Chamber Features - Patented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 6 Liter Console Freeze Dryers are designed forlyophilizing moderate to large sample loads or numerous small containerbatches. The console features a front viewing window, interior space for avacuum pump, and accommodation for a large tray dryer such as the FreeZoneStoppering Tray Dryers (pump and tray dryer sold separately). These modelsoffer the broadest range of built-in options including a shell freezer. Theupright stainless steel collector coil holds 6 liters of ice before defrosting.A single 3/4 hp HCFC/CFC-free refrigeration system cools the collector to -50°C (-58F), suitable for aqueous samples. Lyo-Works™ OS provides a real timedisplay of collector temperature, vacuum level and optional End-Zone™ end pointdetection system, shown on a 5" full color, capacitive touch screen.Models with PTFE-coated collectors that can withstand corrosive compounds areavailable.INCLUDED: The Labconco 700611200 FreeZone 6L -50C Console Freeze Dryer with stainless steel coil and collector, Purge Valve & Mini Chamber 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

This listing is for a Velp Scientific ZX3 Advanced Vortex Mixer.  Variable speed operation, electron (more)ically controlled up to 3000 rpmAutomatic start in touch mode or continuous operationUniversal voltage / frequency modelAccessories fit by simple pressureOptimum resistance to chemicals from technopolymer casingExcellent stability with zinc alloy baseLarge, anti-slip rubber feet for staying in required positionIP 42 protection against particles and liquids

Thermal shaker with Ohaus incubator OHAUS thermal agitators are designed for applications that requi (more)re constant and precise high-speed shaking, with heating or cooling. The temperature control allows to reach 17°C below the ambient temperature (for the model with cooling) up to 100°C. In case of high accuracy, the temperature can be calibrated by the user. Thanks to interchangeable blocks it is possible to customize the instrument for different applications, housing test tubes or microplates. The intuitive touchscreen allows the operator to view all program steps and monitor the entire process with a simple glance. - Best-in-class thermal performance thanks to advanced electronics and software. Up to 17°C below ambient temperature. - The intuitive touchscreen simplifies use and programming, with complete functions and help screens in six different languages, to assist the operator while using the unit - Easy creation of programs for repetitive applications. Memory for five different five-step programs. The USB port allows you to transfer test data to a flash drive for data collection and program storage Applications DNA, RNA, cell cultures, hybridizations, protein studies Display 4.3-inch (10.9 cm) color liquid crystal touchscreen (LCD) display, programmable in six languages Operation Detachable three-wire cable and plug (included). The unit requires a lock. Compatible with Eppendorf Thermomixer® R blocks Communication The USB port guarantees great flexibility in data collection and transfer Structure Cold-touch Valox construction, removable plastic rack, cover and screwdriver for block removal (included) Construction features Hot Cover Indicator, Audible Alarm, Maximum Temperature Limitation Function, Temperature Priority Function, Pulse / Fast Mix Mode, Temperature Calibration Mode, Temperature Rise Rate Function Technical Characteristics Specifications of the ISTHBLHTS model - Orbital movement, 3mm - Temperature calibration - USB - Brushless DC Motor Transmission - Heating rate (/min): 5°C/min - Safety Certification: CE; TUV - Speed ​​Accuracy: ±2% - Temperature accuracy (±): +/- 0.5°C between 20°C and 45°C; +/-2°C between 20°C and 45°C - Timer: from 1 second to 99 hours and 59 minutes

The ramps are used to easily place the trolleys containing loads onto the 4-load-cell platform scale (more)s. They enable placing the scale into the production line as a measuring or control workstation. Uncomplicated loading and unloading of the weighing platform allows smooth control over the loads and is time saving.

Suitable for volumes up to 10 liters (H2O) Temperature range up to 300°C Stirring speed: 0 – 1100 rp (more)m Plate diameter: 125 mm Dimensions (LxWxH): 240 x 150 x 120 mm