WTW OXI 3205 portable oximeter

This Varian VK 8000 Dissolution Sampling Station was removed from a university lab where it was surp (more)lus to requirements. This item is in good cosmetic condition and powered up, we are unable to test it further at our facility. The VK 7010 has the capacity to hold 8 vessels of 1 litre capacity and 8 stirring drive shafts but this unit is Missing all its vessels and only has 1 stirrer

WTW OXI 3205 portable oximeter Without probe Waterproof dissolved oxygen measuring instrument Batter (more)y type: 4 x 1.5 V AA rechargeable batteries or 4 x 1.2 V NiMH rechargeable batteries Compensation and correction of atmospheric pressure: Automatic from 500 to 1100 mbar Protection class: IP 67 Screen display: backlit graphic LCD Dissolved O2 measuring range: 0.00 to 90 mg/L Dissolved O2 accuracy: ±0.5% Dissolved O2 resolution: 0.01, 0.1mg/L Temperature precision/accuracy: ±0.1°C Working/Operating/Use Temperature: -5 to 50°C Net weight: 2KG

WTW OXI 3205 portable oximeter + Cellox 325 probe With Cellox 325 probe Waterproof dissolved oxygen  (more)measuring instrument Battery type: 4 x 1.5 V AA rechargeable batteries or 4 x 1.2 V NiMH rechargeable batteries Compensation and correction of atmospheric pressure: Automatic from 500 to 1100 mbar Protection class: IP 67 Screen display: backlit graphic LCD Dissolved O2 measuring range: 0.00 to 90 mg/L Dissolved O2 accuracy: ±0.5% Dissolved O2 resolution: 0.01, 0.1mg/L Temperature precision/accuracy: ±0.1°C Working/Operating/Use Temperature: -5 to 50°C Net weight: 2KG

WTW OXI 3205 portable oximeter Without probe Waterproof dissolved oxygen measuring instrument Batter (more)y type: 4 x 1.5 V AA rechargeable batteries or 4 x 1.2 V NiMH rechargeable batteries Compensation and correction of atmospheric pressure: Automatic from 500 to 1100 mbar Protection class: IP 67 Screen display: backlit graphic LCD Dissolved O2 measuring range: 0.00 to 90 mg/L Dissolved O2 accuracy: ±0.5% Dissolved O2 resolution: 0.01, 0.1mg/L Temperature precision/accuracy: ±0.1°C Working/Operating/Use Temperature: -5 to 50°C Net weight: 2KG

WTW OXI 3205 portable oximeter Without probe Waterproof dissolved oxygen measuring instrument Batter (more)y type: 4 x 1.5 V AA rechargeable batteries or 4 x 1.2 V NiMH rechargeable batteries Compensation and correction of atmospheric pressure: Automatic from 500 to 1100 mbar Protection class: IP 67 Screen display: backlit graphic LCD Dissolved O2 measuring range: 0.00 to 90 mg/L Dissolved O2 accuracy: ±0.5% Dissolved O2 resolution: 0.01, 0.1mg/L Temperature precision/accuracy: ±0.1°C Working/Operating/Use Temperature: -5 to 50°C Net weight: 2KG

Radwag AS60 / 220.R2 PLUS Analytical Balance. Capacity 220 g. Readability 0.01 / 0.1 mg. Linearity ± (more) 0.05 / 0.2 mg. Minimum capacity 1 mg. Diameter of the plate 90 mm. Internal calibration. LCD screen. Interfaces: 2 × RS 232, USB-A, USB-B. Leveling system. Power supply 100 ÷ 240 V AC 50/60 Hz. Radwag AS60 / 220.R2 PLUS Analytical Balance. The AS R2 PLUS series balance is a standard analytical weighing device from the SYNERGY LAB line. The AS R2 PLUS is exceptional due to a range of modern construction solutions and systems that guarantee the reliability, precision and accuracy of measurement, and make daily operation easy. New ergonomic design. The latest AS R2 PLUS analytical balances have a spacious weighing chamber, and the large free space of the open door allows free access to the weighing pan and the use of laboratory vessels of various sizes. The stability of the measuring system is ensured by a better balance base made of aluminum. Thanks to the DUAL-CLICK system, the disassembly and assembly of the weighing chamber is done without the use of tools, and the special construction of the weighing chamber glass guides (without edges) significantly facilitates the cleaning of the device. Innovative construction solutions increase the durability and reliability of the balance in long-term operations. Leveling system The standard series of AS R2 PLUS balances is equipped with a spirit level at the front of the chamber, which significantly facilitates continuous level control. Internal calibration The modernization of the internal calibration system guarantees the accuracy of the indications in extremely adverse conditions.

Water bath from 25°C to 99.9°C for the laboratory The shaking water baths of the LAUDA Hydro series  (more)stir laboratory samples with linear or orbital motion, depending on the model. They are reliable instruments, ideal for any laboratory application, be it biological, medical or biochemical, guaranteeing a homogeneous distribution of the temperature. The integrated speed controller enables a load-independent, continuously adjustable stirring movement with soft start. The H 20 SW and H 20 SOW shaking water baths are equipped with a cooling coil as standard. The temperature range can be extended to a minimum of +10°C by connecting them to the domestic water supply or commercially available circulating chillers. Qualitative characteristics - Digital regulation of the temperature and indication via LED display - Load-independent, continuously variable stirring with soft start - Electronic monitoring of the thermoregulator functions, with two fuses for under/over temperature protection - Tank, frame, cover with condensation channel, shaking basket and heater in stainless steel - No dripping condensation – arched insulating lid to reduce heat loss and prevent condensation from dripping onto samples Operation All water baths come standard with a perforated pan and no racks are required. Flasks and containers can be placed directly on the bottom. The drain valve is located on the rear side. Controllers The control panel consists of a large, high-contrast TFT display and a membrane keyboard with four softkeys, protected against dirt and water drops. The menu will guide you on how to use the bain-marie correctly. Esempi applicativi - Bacteriological tests - Molecular biology - Demulsivity studies - Processing of chemical reactions - Thawing - Metallurgical analyses - Incubation of microbiological assays - heating reagents - Environmental studies - Food Processing (QC) - Water quality research - Cytochemistry Accessories available Water level regulator. The heating element is located directly under the sieve plate for even temperature distribution in the tank. Electronic monitoring of the temperature regulator. Two independently operating temperature fuses. Improved visual and audible alarms for increased sample safety. Control elements tilted back for increased splash protection and improved operating comfort. - Perforated plate to place the glassware directly on the bottom. - Fill mark max. to prevent overflows. - Easy removal of sieve plate for cleaning. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Limescale deposits inside the water bath can be removed with normal commercial descalers. The internal tray can be easily disassembled and lifted for quick and thorough cleaning. Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

This Turner BioSystems Modulus II Microplate Multimode Reader was removed from a university lab wher (more)e it was surplus to requirements. Included are; 1 x Turner BioSystems Modulus II Microplate Multimode ReaderModel - 9300-011 1 x Injector SystemModel - 9300-062 Fluorescence Optical Kit with:EX 365EX 525EX 490EX 625 It comes with a power supply & a pump module cable. The item powers on and is in good, used cosmetic condition. The absorbance module is not included.

IKA R 3003 Spiral stirrer Maximum Speed ≤ 800 rpm Flow Type Axial Material Stainless Steel Features  (more)- Constructed from AISI 316L / 1.4571 stainless steel for exceptional durability - Suitable for a broad ambient temperature range of 5 - 40 °C - Generates axial flow, moving medium from the bottom upwards for effective mixing - Ideal for homogeneous mixing and heat exchange in medium to high viscosity media - Designed for use at low to medium speeds, with a maximum speed of ≤ 800 rpm - Stirrer diameter: 50 mm for optimal mixing efficiency This stirrer is equipped with a 50 mm diameter and a 350 mm shaft length, designed to create an axial flow that moves media from the bottom upwards, suitable for mixing and heat exchange in medium to high viscosity substances. Constructed from AISI 316L / 1.4571 stainless steel, it offers durability and resistance to corrosion. With a weight of 0.2256 kg and an overall height of 87.7 mm, it is built for stability and ease of integration into various lab environments. The stirrer is intended for low to medium speed applications, with a maximum operational speed of ≤ 800 rpm and can be used within an ambient temperature range of 5 - 40 °C.INCLUDED: The IKA R 3003 Spiral stirrer includes: - IKA R 3003 Spiral stirrer - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

MWMH series modules are not offered or distributed in the following countries: Germany, Switzerland, (more) Italy, Japan and the USA. Vast Max Capacity Range Magnetoelectric weighing modules MWMH are intended for mass measurement ranging from 1kg to 10kg. Minimum readability of 0.01g guarantees amazing accuracy for your measurement. Protection Against Challenging Conditions Hermetic versions of modules feature stainless steel housing with IP65 and IP69K. This allows operation even in the most challenging conditions. Mechanical design lacks sharp edges and gaps which ensures adherence to HACCP, GMP and FDA standards for safety and quality of operation. Fast and Precise Measurement High measurement accuracy with sd=1d* guarantees both readout of real weighing results and repeatability of indications. Cutting-edge design solutions provide fast measurement which is an asset allowing to install the module on automated production lines. Intended for fast and dynamic measuring processes the weighing module’s converter throughput is 3200 meas./s. Cooperation with terminals Connecting the module to a multifunctional weighing terminal expands communication interfaces range and increases usage in industrial applications. Mechanical design versions: MWMH xxx - 1 - model with Binder connectors (IP65), MWMH xxx - 2 - model with Binder connectors, (IP65), power supply and control of the transporter on a weighing pan, MWMH xxx - 3 - model with cable glands, (IP 69K), MWMH xxx - 4 - model with cable glands (IP69K), power supply and control of the transporter on a weighing pan MWMH xxx - TWD - model with cable glands (IP 69K).

Model: Noise Reduction Soundproof Box for Ultrasonic Baths Schallschutzgehäuse für Ultraschallbad D (more)escription: This soundproof box is an acoustic enclosure for the noise reduction and insulation of ultrasonic baths in the laboratory.Although ultrasound is above the audible range of the human ear, mechanical noise occurs when liquids are treated ultrasonically.The noise may be disturbing in a room with low ambient noise level if exposed for prolonged periods of time.The soundproof enclosure can minimize mechanical noise produced by ultrasonic processing. The sturdy cabinet is lined with sound-absorbing material.Thick polyurethane acoustic foam material covers the interior part of the box.The foam has open cell construction that delivers very good noise absorption.The wavy form factor of the foam multiplies absorption capacity by increasing the surface area for sound reception. Openings at the sides of enclosure make it easy for the access.This soundproof box for ultrasonic baths allows operation of ultrasonic cleaning units in sensitive work areas such as chemical and dental laboratories, medical practices or even workshops. Features: - Low maintenance- High demand- Robust and easy cleanable surface- Cushioned opening mechanism for smooth handling- The cover can be wide opened, so it is very easy to handle Specifications: - This noise protection box reduces the typical cavitation noise of an operating ultrasonic unit to a tolerable level - noise reduction by approx. 20dBA- Dimensions: H58 x W40 x D40 cm (external)- Dimensions: H53 x W29,5 x D35 cm (internal)- Weight: 15 kg Condition: The noise reduction soundproof box is in a very good cosmetical and functional condition. It is ready for your application.