Chiller LAUDA Variocool VC 7000

Jinan King Rabbit CNC Machine System PSU And Chiller This was removed from a university lab where it (more) was surplus to requirements. The system powers up but has not been tested further. Includes: -HPC PSU -Motion controllerS/N- 13920124 -S&A Industrial Chiller (no cap)Model number-CW3000AG Max RPM- 24000 Model number- RC 4040

This Julabo FL 1703 Recirculating Chiller Model: FL1703GB was removed from a university lab whe (more)re it was surplus to requirements. The item is in reasonable cosmetic condition. It has scratches and stains along its surface. The unit powers up but requires a replacement compressor. It is in good cosmetic condition with minor marks. It is sold for spares/repairs.

Polyscience BA05A1G3-110A1NC DuraChill Benchtop Chiller, -10C to 30C, 450W, 120V Flow Rate 15L/min  (more)(4 gpm) Temperature Range -10C to 30C Cooling Capacity 450W at 20C Features - Intuitive touchscreen display with 5 operating languages (Chinese, English, French, German, Spanish) - Full text messages and audible alarms - Continuous fluid level monitoring to prevent premature pump failure - Variable Fan Speed Technology for quieter operation - UV Light Biological Growth Inhibitor - Patented Self-diagnostic system - Low flow shutoff and alarm, high and low temperature alarms - Displayable temperature units in °C or °F The Polyscience BA06A1G3-110A1NC DuraChill Benchtop Chiller offers advanced cooling technology with a temperature range of -20C to 30C and a cooling capacity that varies from 150W at -20C to 900W at 20C. It features a microprocessor-based temperature controller with a high-resolution TFT LCD display, enabling temperature readouts in °C or °F and pressure display with an accuracy of ± 35% of full scale. The user-friendly interface includes a touch screen display, a multi-language interface, and touch keypad for precise temperature set-point adjustments. The chiller utilizes a Cool Command modulated refrigeration system to enhance temperature stability and extend compressor life, while the WhisperCool Environmental Control System optimizes noise reduction and energy efficiency. It comes equipped with a centrifugal (magnetic drive) pump capable of delivering a flow rate of 15L/min at 0 psi, with pressure up to 18 psi. Additional features include continuous level sensing in the standard reservoir (1.5L capacity) for pump protection, and an optional UV Anti-Growth Light to prevent biological growth in the process fluid. This makes the DuraChill Chiller a robust and efficient solution for demanding applications where tap water cooling systems fall short. Click Here to View Product Video INCLUDED: The PPolyscience BA05A1G3-110A1NC DuraChill Benchtop Chiller, -10C to 30C, 450W, 120V includes: - 1 Pair of 1/2" NPT x 3/8" Barbed Fittings - 1 Pair of 1/2" NPT x 1/2" Barbed Fittings - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

LAUDA Variocool: Versatile circulation chillers from 1200W to 10 kW used between -20°C and +80°C to  (more)dissipate process heat in laboratories, small plants or production. LAUDA Variocool circulation chillers convince with their space-saving design and the versatility offered by a wide variety of options. They are circulation thermostats suitable for use with non-flammable heat transfer liquids within a moderate temperature range. The new control panel design and color TFT display make making changes very simple and intuitive. Various options in power kW, pump pressure / flow rate and tank size offer a wide range of choice for the customer, adapting better to his needs. Contact us to understand the model that best suits your needs. All models (except VC 600) are available in the air-cooled or water-cooled (W) versions and equipped with fixed swivel castors. High performance circulation chillers starting with the VC 5000 are available with sound insulation or outdoor installation option. Cooling performance of the Variocool VC 7000 model (measured with ethanol): - a 20°C, 7.00 kW - a 10°C, 5.30 kW - a 0°C, 3.70 kW - a -10°C, 2.40 kW - a -20°C, 1.50 kW Notable features - Adjustable bypass for pressure limitation - Top filling opening, drain cock on the back - Integrated programmer with 150 segments, divisible into 5 programs - Electronic level indicator with low level alarm - SmartCool system for energy-saving digital control of cooling, including automatic compressor control - Temperature graphs on display Examples of specific applications - Refractometer - Polarimeter - Disposable bioreactors - Extruder for food production - Micro reactors - Reactive control in chemical / pharmaceutical environments - Climatic chambers - Spatial simulation - Electric mobility; battery test - Test benches - Stress test - Crystallization regulation - Lyophilization - Micro structures - Painting plants Accessories included Nozzles for pump connections; screw cap. Various options in power (kW), pump pressure/flow rate and tank size offer a wide range of choice for the customer, adapting better to his needs. Contact us to understand the model that best suits your needs. Simple control panel with large TFT display with lots of information. Front panel of the LAUDA Variocool easily removable for fast maintenance and modifications. Easily upgradeable with different interfaces (analog module, contact module, RS 232/485, Profibus, Ethernet-USB module). USB Type B Interface. Connections located on the back of the Variocool: inlet/outlet pump connection; bypass adjustments. Large frontal pressure display. Pump performance graph of LAUDA Variocool heating chillers. Overview of the technical characteristics of the Variocool LAUDA models. TECHNICAL VISUALIZATION 1 - Filler nozzle with cover 2 - Control panel 3 - Pressure gauge 4 - Mains switch 5 - Alarm output and module bays 6 - Front panel (ventilation openings only in case of air-cooled devices) 7 - Ventilation openings (on both sides) 8 - Four castors (front castors with locking brake) 1 - Pump connection, outflow 2 - Bypass adjusting wheel 3 - Pump connection, return flow 4 - Drain tap 5 - Connecting sleeve for water cooling outlet (only available for water- cooled devices) 6 - Connecting sleeve for water cooling intake (only available for water- cooled devices) 7 - Ventilation grid 8 - Rating label 9 - Power supply 10 - Fuses (up to and including VC 3000 (W)) 1 - Light sensor 2 - Pressure gauge 3 - Mains switch 4 - Entry key and arrow keys 5 - Soft keys (left and right) 6 - USB interface Type B (on the side of the control panel) 7 - TFT display

LAUDA Variocool: Versatile circulation chillers from 1200W to 10 kW used between -20°C and +80°C to  (more)dissipate process heat in laboratories, small plants or production. LAUDA Variocool circulation chillers convince with their space-saving design and the versatility offered by a wide variety of options. They are circulation thermostats suitable for use with non-flammable heat transfer liquids within a moderate temperature range. The new control panel design and color TFT display make making changes very simple and intuitive. Various options in power kW, pump pressure / flow rate and tank size offer a wide range of choice for the customer, adapting better to his needs. Contact us to understand the model that best suits your needs. All models (except VC 600) are available in the air-cooled or water-cooled (W) versions and equipped with fixed swivel castors. High performance circulation chillers starting with the VC 5000 are available with sound insulation or outdoor installation option. Cooling performance of the Variocool VC 1200 model (measured with ethanol): - a 20°C, 1.20 kW - a 10°C, 1.00 kW - a 0°C, 0.70 kW - a -10°C, 0.40 kW - a -20°C, 0.18 kW Notable features - Adjustable bypass for pressure limitation - Top filling opening, drain cock on the back - Integrated programmer with 150 segments, divisible into 5 programs - Electronic level indicator with low level alarm - SmartCool system for energy-saving digital control of cooling, including automatic compressor control - Temperature graphs on display Examples of specific applications - Refractometer - Polarimeter - Disposable bioreactors - Extruder for food production - Micro reactors - Reactive control in chemical / pharmaceutical environments - Climatic chambers - Spatial simulation - Electric mobility; battery test - Test benches - Stress test - Crystallization regulation - Lyophilization - Micro structures - Painting plants Accessories included Nozzles for pump connections; screw cap. Various options in power (kW), pump pressure/flow rate and tank size offer a wide range of choice for the customer, adapting better to his needs. Contact us to understand the model that best suits your needs. Simple control panel with large TFT display with lots of information. Front panel of the LAUDA Variocool easily removable for fast maintenance and modifications. Easily upgradeable with different interfaces (analog module, contact module, RS 232/485, Profibus, Ethernet-USB module). USB Type B Interface. Connections located on the back of the Variocool: inlet/outlet pump connection; bypass adjustments. Large frontal pressure display. Pump performance graph of LAUDA Variocool heating chillers. Overview of the technical characteristics of the Variocool LAUDA models. TECHNICAL VISUALIZATION 1 - Filler nozzle with cover 2 - Control panel 3 - Pressure gauge 4 - Mains switch 5 - Alarm output and module bays 6 - Front panel (ventilation openings only in case of air-cooled devices) 7 - Ventilation openings (on both sides) 8 - Four castors (front castors with locking brake) 1 - Pump connection, outflow 2 - Bypass adjusting wheel 3 - Pump connection, return flow 4 - Drain tap 5 - Connecting sleeve for water cooling outlet (only available for water- cooled devices) 6 - Connecting sleeve for water cooling intake (only available for water- cooled devices) 7 - Ventilation grid 8 - Rating label 9 - Power supply 10 - Fuses (up to and including VC 3000 (W)) 1 - Light sensor 2 - Pressure gauge 3 - Mains switch 4 - Entry key and arrow keys 5 - Soft keys (left and right) 6 - USB interface Type B (on the side of the control panel) 7 - TFT display

Minimum temperature: -10˚C Temperature resolution: ±0.1˚C Pump type: Turbine Compressor: 1HP Heating (more): No (refrigeration only) Flow rate: 11 L/min Pump pressure: up to 5 bar Reservoir capacity: 4.2 L Cooling capacity: 2.7kW (at 20˚C) Dimensions (LxWxH): 370 x 700 x 580 mm Weight: 90 kg

This item has just arrived in our stock. Please enquire for further details.

Labconco FreeZone 6L -50C Console Freeze Dryer with stainless steel coil and collector, Purge Valve  (more)& Mini Chamber Features - Patented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 6 Liter Console Freeze Dryers are designed forlyophilizing moderate to large sample loads or numerous small containerbatches. The console features a front viewing window, interior space for avacuum pump, and accommodation for a large tray dryer such as the FreeZoneStoppering Tray Dryers (pump and tray dryer sold separately). These modelsoffer the broadest range of built-in options including a shell freezer. Theupright stainless steel collector coil holds 6 liters of ice before defrosting.A single 3/4 hp HCFC/CFC-free refrigeration system cools the collector to -50°C (-58F), suitable for aqueous samples. Lyo-Works™ OS provides a real timedisplay of collector temperature, vacuum level and optional End-Zone™ end pointdetection system, shown on a 5" full color, capacitive touch screen.Models with PTFE-coated collectors that can withstand corrosive compounds areavailable.INCLUDED: The Labconco 700611200 FreeZone 6L -50C Console Freeze Dryer with stainless steel coil and collector, Purge Valve & Mini Chamber 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Ohaus MB120 Moisture Analyzer MB120 allows you to run more samples, access saved data and spend less (more) time preparing and more time working with results. Smart, futuristic features that allow you to work at full potential: - Get started with SmartGuide ™ right away. This revolutionary feature automatically analyzes a sample and creates a method, thus eliminating any uncertainty from the initial setup. - The MB120 is able to produce fast and accurate results thanks to features such as a halogen heating system, customizable shutdown criteria and four integrated drying profiles. - The MB120 allows you to store up to 100 methods and 1,000 measurement results. Stored results can be exported and methods can be shared across multiple devices. Applications Determination of percentage humidity, determination of the recovery of percentage humidity, determination of solids in percentage, weighing Display 4.3 inch TFT color touchscreen display Operation Power cord (included) Communication RS232 with GLP / GMP data output, USB host and USB device (included) Structure Metal base, ABS top housing, halogen heat source, stainless steel plate holder, stainless steel plate manipulator, protective hood Construction features Seven shutdown criteria (manual, timed, custom automatic% / s, custom automatic mg / s, A30, A60 and A90), four drying profiles (standard, fast, ramp and step), storage up to 100 methods and 1,000 results for all methods, user guide, heating temperature range from 40 to 230 ° C (in 1°C increments), 14 languages ​​of operation Technical features Resolution for moisture content: 1mg/0.01%. Heater type: halogen lamp. Heat profiles: Standard; Fast; Ramp; Step. Recommended humidity range: 0% - 100%. Sample size: 0.5g – 1290g. Shutdown criteria: Manual; Timed; Automatic - Preset weight / time loss; Custom - User configurable weight / time loss; Custom: User configurable% moisture / time loss. Test library: 2. Additional features - MB90 Upper housing in ABS, weighing pan support in stainless steel, pan holder in stainless steel, protective hood, 3 shutdown criteria (manual, timed or automatic), 2 heating profiles (standard and fast), storage of up to 2 methods and 100 test results for each method, user guide, heating temperature range 40–200°C (in 1°C increments), 13 operating languages ​​(display only, no typing). Drying profiles Two pre-set profiles for drying in one step: just set the temperature and the timer. FAST: reaching the temperature in the shortest possible time. STANDARD: reduces overheating to a minimum while still reaching the temperature quickly. The simplest control panel • Icon driven menu navigation; no training is required. • 4 mechanical keys for fast one-step operation: Tare, Start/Stop, Print, On/Off. • Simplified moisture analysis; in just 3 steps, routine testing on samples: 1. Tare the empty sample dish. 2. Add sample according to best practices. 3. Press start and see your results! Halogen heating dries samples in seconds and is 40% faster than traditional infrared methods. Large, bright touchscreen display and quick and easy menu navigation for precise moisture analysis. Versatile connectivity options to handle data collection and transfer needs: improve user experience. • USB and RS232 ports - quick connections to a PC or flash drive. • Data collection and transfer directly to a USB stick.

Embossed foil keypad for simple operation Short-spin function with pre-selected rotational speed rpm (more) or rcf settings as required (from 500 rpm in steps of 100 rpm) Timer up to 99 min or continuous run Soft key for gentle acceleration and deceleration Automatic imbalance detection Equipped with a Eppendorf F-45-30-11 fixed angle rotor. Rotor has a 30x 3,75 g capacity and a max rpm of 14000. Max. rotational speed: 14,000 rpm Max. load: 30 x 2.0 ml Safe-Lock Microcentrifuge Tubes Max. density of material to be centrifuged: 1.2 g/ml Max. kinetic energy: 6,100 Nm Dimensions (HxWxD): 228 x 310 x 430 mm Weight: 17 kg

pulse dampener

Pallet scales is stable and proved 4 load cell construction designed for weighing pallets. The load  (more)to be weighed can be placed on the platform by a standard fork-lift truck. Pallet scales H315/4P/H series is manufactured in stainless steel technology. The H315/4P/H series features wheels and handles for easy transporting the scales to its place of use. The scales comes standard with an indicator PUE H315 series featuring backlit LCD display and function buttons. The indicator is installed on a long cable. The scale is powered from mains 230V AC, RS 232 interface comes standard. Scales is available in dual range version on surcharge.