Thermo-Cryostat RA 8 LAUDA

ECO Silver Lauda - Cooling Thermostat LAUDA ECO with reliable technology and modern design for tempe (more)rature ranges from -50°C to 200°C depending of the models. Microprocessor management and integrated cooling system. Silver (monochromatic LCD graphic display), both equipped with mini USB interface. They are distinguished by their range of functions, ease of use and clarity of the display, allowing maximum comfort of use for the operator. These models offer the highest performance conveyed by the LAUDA SmartCool intelligent system, for maximum energy savings. The circulation pump can be adjusted to six levels and the comprehensive range of ECO devices offers cooling capacities from 180 to 700 watts. Refrigerated thermostats comes standard with tank lid, pump connections and are available with air and water cooling. A drain cock on the back of the device makes changing the liquid in the tank easy and safe.Thermostatic bath/circulator with latest microprocessor technology and integrated cooling system MAIN FEATURE • Monochrome grafic LCD display for simultaneous indication of actual and set value • User friendly menu navigation in plain language • Easy input via cursor and soft keys. Additional Tmax key for overtemperature protection • Fully electronic continuous controller with PID action • Safety class III for operation with flammable and non-flammable liquids. Overtemperature cut-out adjustable via menu • Vario pump with six adjustable performance levels • Easy control of the flow rate between internal and external circulation during operation without contact with the bath • USB interface as standard • Upgradeable with an interface module (analogue module, contact module, RS 232/485 module, Profibus, Ethernet-USB module) • Upgradeable with Pt 100/LiBus module for external control and remote control via Command console • Integrated programmer, 1 programme with max. 20 segments • Pump connectors with plastic nipples 13 mm as standard • Bath vessel made from stainless steel with drain valve • Condenser cooling Air • Utilizes natural refrigerants Graph of cooling performance of ECO Silver LAUDA cryostats. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Pump connection: Outflow and return with fittings 13 mm diameter (plastic) 2 - Bath cover 3 - Front grip recess 4 - Ventilation grill (both sides) 5 - Front panel (removable without tools) 6 - Four feet 1 - Rating label 2 - Control cable of cooling underpart (only with RE 1050 S) 3 - Rear grip recess 4 - Connecting lead between the control head and cooling underpart 5 - Bath draining tap 6 - Bath drain point 7 - Ventilation grill

This Huber Minichiller Refrigerated Laboratory Water Bath was removed from a university lab where it (more) was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). When set to -20˚C it dropped to -12˚C after running for 5 hours. It is not designed to heat. It is in good cosmetic condition with some marks from use.

Fisher Scientific Isotemp 3016S Recirculating Water Chiller and Heating Unit This item was removed f (more)rom a university where it was surplus to requirement. The unit powers up and is in good working order (thermometer not included). Specifications: - Temperature range -20 to +150˚C - Reservoir volume 6 litres - Pumping capacity 12 litres per minute

This Julabo FL 1703 Recirculating Chiller Model: FL1703GB was removed from a university lab whe (more)re it was surplus to requirements. The item is in reasonable cosmetic condition. It has scratches and stains along its surface. The unit powers up but requires a replacement compressor. It is in good cosmetic condition with minor marks. It is sold for spares/repairs.

LAUDA Variocool: Versatile circulation chillers from 1200W to 10 kW used between -20°C and +80°C to  (more)dissipate process heat in laboratories, small plants or production. LAUDA Variocool circulation chillers convince with their space-saving design and the versatility offered by a wide variety of options. They are circulation thermostats suitable for use with non-flammable heat transfer liquids within a moderate temperature range. The new control panel design and color TFT display make making changes very simple and intuitive. Various options in power kW, pump pressure / flow rate and tank size offer a wide range of choice for the customer, adapting better to his needs. Contact us to understand the model that best suits your needs. All models (except VC 600) are available in the air-cooled or water-cooled (W) versions and equipped with fixed swivel castors. High performance circulation chillers starting with the VC 5000 are available with sound insulation or outdoor installation option. Cooling performance of the Variocool VC 3000 model (measured with ethanol): - at 20°C, 3.00 kW - at 10°C, 2.40 kW - at 0°C, 1.68 kW - at -10°C, 1.03 kW - at -20°C, 0.60 kW Notable features - Adjustable bypass for pressure limitation - Top filling opening, drain cock on the back - Integrated programmer with 150 segments, divisible into 5 programs - Electronic level indicator with low level alarm - SmartCool system for energy-saving digital control of cooling, including automatic compressor control - Temperature graphs on display Examples of specific applications - Refractometer - Polarimeter - Disposable bioreactors - Extruder for food production - Micro reactors - Reactive control in chemical / pharmaceutical environments - Climatic chambers - Spatial simulation - Electric mobility; battery test - Test benches - Stress test - Crystallization regulation - Lyophilization - Micro structures - Painting plants Accessories included Nozzles for pump connections; screw cap. Various options in power (kW), pump pressure/flow rate and tank size offer a wide range of choice for the customer, adapting better to his needs. Contact us to understand the model that best suits your needs. Simple control panel with large TFT display with lots of information. Front panel of the LAUDA Variocool easily removable for fast maintenance and modifications. Easily upgradeable with different interfaces (analog module, contact module, RS 232/485, Profibus, Ethernet-USB module). USB Type B Interface. Connections located on the back of the Variocool: inlet/outlet pump connection; bypass adjustments. Large frontal pressure display. Pump performance graph of LAUDA Variocool heating chillers. Overview of the technical characteristics of the Variocool LAUDA models. TECHNICAL VISUALIZATION 1 - Filler nozzle with cover 2 - Control panel 3 - Pressure gauge 4 - Mains switch 5 - Alarm output and module bays 6 - Front panel (ventilation openings only in case of air-cooled devices) 7 - Ventilation openings (on both sides) 8 - Four castors (front castors with locking brake) 1 - Pump connection, outflow 2 - Bypass adjusting wheel 3 - Pump connection, return flow 4 - Drain tap 5 - Connecting sleeve for water cooling outlet (only available for water- cooled devices) 6 - Connecting sleeve for water cooling intake (only available for water- cooled devices) 7 - Ventilation grid 8 - Rating label 9 - Power supply 10 - Fuses (up to and including VC 3000 (W)) 1 - Light sensor 2 - Pressure gauge 3 - Mains switch 4 - Entry key and arrow keys 5 - Soft keys (left and right) 6 - USB interface Type B (on the side of the control panel) 7 - TFT display

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Maximum Temperature Homogeneity The particular CerAlTop ™ plate, in aluminum alloy coated with a cer (more)amic layer, ensures a formidable temperature homogeneity over the entire surface of the plate itself, up to 370°C and at the same time excellent resistance to chemical agents and ease of cleaning. Fontal panel The control panel is extremely intuitive. By turning the left knob it is possible to adjust the temperature (up to 370°C), while with the right one you can act on the agitation (up to 1500 rpm). Maximum Protection, IP 42 AREX magnetic stirrers guarantee a high level of safety and protection for the user, also thanks to the raised control panel and the special channel for conveying liquids (in case of spills). The control panel is easily accessible, away from heat sources that are dangerous for the operator and protected from any liquid leaks by means of a special conveyor channel. The particular geometry prevents accidental overflows of liquid being processed from entering the internal parts of the instrument. Thermoregulation of the liquid being processed For unmatched performance, AREX supports the VTF Fuzzy Logic digital temperature controller. VTF ensures perfect thermoregulations up to 300°C, given the very high level of accuracy of ±0.5°C. In addition, with VTF it is also possible to set the operating time, to better program the temperature control. Low Profile, Attractive Design AREX offers an innovative low profile and a highly attractive design for greater comfort for the user. Even the inclination of the front panel has been carefully studied to facilitate its use. AluBlocks ™, Greater Versatility AluBlocks ™ allow you to perform different heating and stirring experiments with unprecedented flexibility, acting on different types and sizes of tubes. Being modular, they are ideal for creating a workstation that is always customized, capable of supporting tubes of different formats. Made entirely of aluminum, they can be easily placed on the round head heating stirrers for excellent heat transmission and temperature homogeneity. A huge leap forward in productivity, while also saving time, money and counter space.

Binder CB-S 170 CO2 Incubator Double Stack Lab This was removed from a university lab where it was s (more)urplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. This unit has been professionally serviced and is in full working order. The service report is available on request.

Eppendorf 1 x 5ml Adapters for F-34-6-38, Cat # 5804777000 Eppendorf 1 x 5ml Adapters for F-34-6-38, (more) Cat # 5804777000. New in packaging, the 1 x 5mL tube adapter for the Eppendorf F-34-6-38 is for use in the Eppendorf 5804/5804R and 5810/5810R centrifuges. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 1 x 5ml Adapters for F-34-6-38, Cat # 5804777000 includes: - Full 6 Month Parts and Labor Warranty

Hermle 500ml insert for Z496-1000-RBUK 2/pk The Hermle 500ml insert is a specially designed accessor (more)y for use with the Hermle Z496-1000-RBUK rectangular buckets. This insert comes in a pack of 2 and is capable of accommodating tubes with a maximum diameter of 99mm and length of 152mm. With a maximum capacity of 500ml per adapter, this insert allows for efficient processing of large sample volumes. The compatibility with Hermle Z496-1000-RBUK rectangular buckets makes this insert a versatile addition to any laboratory looking to improve their sample processing workflow. The use of this insert ensures that tubes are securely held in place during centrifugation, preventing any sample loss or contamination. INCLUDED: The Hermle 500ml insert for Z496-1000-RBUK 2/pk includes: - Set of 2 Adapters - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scilogex MicroPette Plus 12-Channel Autoclavable Pipettor, 50-300μlThe MicroPette Plus pipettes are  (more)fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function.CalibrationAll SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C.Product Features - Lightweight and ergonomic design - Fully autoclavable - Clear digital display - Staggered tip ejector for easy tip ejection - Head rotates 360° for user comfort. - Easy to calibrate with tool supplied. - Used with 'universal' pipette tips. - Dispensing head rotates for effortless pipetting convenience. - Individual piston and tip cone assembly allow for easy repair and maintenance - Compound material-made tip cone secures high sealing performance - Compatible with most universal tip brands INCLUDED: The Scilogex MicroPette Plus 12-Channel Autoclavable Pipettor, 50-300μl includes: - Two Year Manufacturer's Warranty

Temperature range: 3°C to 16°C Maximum fluctuation: 3.6 °C Maximum gradient: 4.1 °C Defrosting syste (more)m: Automatic defrosting system Cooling system: Dynamic Capacity: 336 L Dimensions (HxWxD): 1840 x 597 x 615 mm Internal dimensions (HxWxD): 1635 x 440 x 435 mm Weight: 65 kg