LAUDA ECO RE 2025 S Cooling Thermostat

SCILOGEX SCIP5-Mini LED Recirculating Chiller, -20°C to ambient, 110V, 60Hz.SCILOGEX SCIP5-Mini LED  (more)Recirculating Chiller, -20°C to ambient, 110V, 60Hz.Features & Advantages: - Temperature range: -20C to room temperature - Employs PID temperature control with built-in PT1000 temperature sensor that provides high accuracy of temperature control - A crystal-clear LED display that switches between display of set temperature and that of actual temperature - The entire unit is capable of protection against short circuit, over-current, overload and delayed start - Integrated design of drain outlet and water outlet that allows easy drainage - The compressor employs state-of-the-art R290 environment-friendly refrigerant - The liquid pathway is made of stainless steel or high-quality corrosion-resistant material - User-friendly operating panel for easy operation - A large-volume open reservoir allows easy filling and supports cold trap experiments INCLUDED: The SCILOGEX SCIP5-Mini LED Recirculating Chiller, -20°C to ambient, 110V, 60Hz. includes: - Power Cord - One Year Manufacturer's Warranty

Polyscience MM71GX1A110C MM7 Benchtop Chiller with Centrifugal Pump, 120V, 60Hz3D Visualization of t (more)he Polyscience Benchtop ChillerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. LM-Series and MM-Series Compact Chillers provide cooling power for demanding applications and serve as economical alternatives to tap water cooling systems. They feature a microprocessor-based controller, digital temperature display (C or °F), and simple operation and maintenance. To optimize cooling efficiency and performance, these sophisticated Chillers also feature a modulated refrigeration system. As a result, temperature stability is greatly enhanced and compressor life extended. LM-Series and MM-Series Chillers are equipped with a magnetic drive centrifugal pump. Wetted parts within the recirculation system are brass, copper, stainless steel, EPDM rubber, Alcryn, nylon, PVC, and polyethylene. Features Precise and stable temperature control at low temperatures Large, easy to read LED display Space-saving, benchtop design Cooling at ambient temperatures as high as 35C Low flow shutoff and alarm, high and low temperature alarms Simple setup, operation, and maintenance Choice of two different centrifugal pumps Fluid level indicator RS232 communication and external water filter optional INCLUDED: The Polyscience MM71GX1A110C MM7 Benchtop Chiller , -5°C to 50°C, 460W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Polyscience CA02A1T1-41AA1N Durachill Chiller with Turbine Pump, -10 to 70°C, 700 to 2900W, 120VACFe (more)atures - Large, full-color touchscreen display with intuitive interface and support for five different languages - Compact, portable design takes up less floor space - Cooling at ambient temperatures as high as 30°C - Choice of pumps and compressor size - DynamicFilter™ self-cleaning filter system - Front fill reservoir - Liquid level monitoring to prevent pump failure - Ultraviolet anti-biological light system - User-adjustable temperature, pressure, and flow rate alarms - Heat up to 70°C, without additional options; ideal for applications, such as lasers, that must be brought to a temperature above ambient before operation can begin - External temperature tracking and communications capability (optional) - Cool Command™, WhisperCool® Your browser does not support iframes.*3D model is solely for visualization and may not depict the actual appearance of your product. DuraChill® is preprogrammed to change its own air filter once a month for a two year period and can be adjusted to suit your operating environment. DuraChill Chillers offer a conveniently located front fill reservoir. You no longer have to go to the back of the chiller top open to fill the reservoir. These high-performance chillers utilize Polyscience's exclusive patent-pending Whispercool noise reduction system. Stableand reliable cooling for many common heat removal applications, including laseretching, AA furnaces, ICP, rotary evaporators, vacuum systems, reactionvessels, plasma etching, and condenser cooling. Click Here to View Product Video INCLUDED: The Polyscience CA02A1T1-41AA1N Durachill Chiller , -10°C to 70°C, 850W; 120V is brand-new . Includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - Full 2 Year Parts and Labor Warranty - Two sets of Inlet/Outlet Adapters: ½ inch male NPT x ½ inch hose barb and ½ inch male NPT x 5/8 inch hose barb Polyscience CA02A1P1-41AA1N Durachill Chiller with Turbine Pump, -10 to 70°C, 700 to 2900W, 120VAC Specifications Part NumberCA02A1T1-41AA1NCooling Capacity @ 20°C0.85 kWCooling Capacity @ 10°C0.6 kWCooling Capacity @ 0°C0.4 kWFluid Temperature Range-10 to 70°C / 14 to 158°FTemperature Stability±0.1°CTemperature Display Units°C or °FDisplayable Pressure UnitsPSI or kPaPump Inlet and Outlet½ inch female NPTConnectivityRS-232, USB Serial Port Emulation, USB TMC, Dry Contact On/Off/StatusPump Pressure Range20 to 90 psi / 138 to 689 kPaMaximum Pump Flow Rate3.5 gpm / 13.2 lpmPower Requirements120V, 60Hz, 13.7AShipping Weight169 lbs / 76.7 kgShipping Dimensions33 x 22 x 33 in / 84 x 56 x 84 cmComparison of ModelsSpecificationPolyscience CA02A1P1-41AA1NPolyscience CA02A1T1-41AA1NPolyscience CA03A1P1-41AA1NPolyscience CA03A1T1-41AA1NPolyscience CA05A1P1-41AA1NPolyscience CA05A1T1-41AA1NPolyscience CA10A3P2-41AA1NPolyscience CA10A3T1-41AA1NCooling Capacity @ 20°C (kW)0.85 kW0.85 kW1.4 kW1.4 kW1.74 kW1.74 kW2.9 kW2.9 kWCooling Capacity @ 10°C (kW)0.6 kW0.6 kW0.99 kW0.99 kW1.29 kW1.29 kW1.93 kW1.93 kWCooling Capacity @ 0°C (kW)0.4 kW0.4 kW0.53 kW0.53 kW0.77 kW0.77 kW1.0 kW1.0 kWFluid Temperature Range (°C/°F)-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°FPump Pressure Range (psi/kPa)45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPaMaximum Pump Flow Rate (gpm/lpm)2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpmPower Requirements (Voltage/Hz)120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz230V, 60Hz230V, 60Hz.comparison-table tr td:nth-child(3) { background-color: #fffacd; }

Polyscience CA02A1P1-41AA1N Durachill Chiller with Positive Displacement Pump, 1/4HP, 120V, 60HzFeat (more)ures - Large, full-color touchscreen display with intuitive interface and support for five different languages - Compact, portable design takes up less floor space - Cooling at ambient temperatures as high as 30°C - Choice of pumps and compressor size - DynamicFilter™ self-cleaning filter system - Front fill reservoir - Liquid level monitoring to prevent pump failure - Ultraviolet anti-biological light system - User-adjustable temperature, pressure, and flow rate alarms - Heat up to 70°C, without additional options; ideal for applications, such as lasers, that must be brought to a temperature above ambient before operation can begin - External temperature tracking and communications capability (optional) - Cool Command™, WhisperCool® Your browser does not support iframes.*3D model is solely for visualization and may not depict the actual appearance of your product. DuraChill® is preprogrammed to change its own air filter once a month for a two year period and can be adjusted to suit your operating environment. DuraChill Chillers offer a conveniently located front fill reservoir. You no longer have to go to the back of the chiller top open to fill the reservoir. These high-performance chillers utilize Polyscience's exclusive patent-pending Whispercool noise reduction system. Stableand reliable cooling for many common heat removal applications, including laseretching, AA furnaces, ICP, rotary evaporators, vacuum systems, reactionvessels, plasma etching, and condenser cooling. Click Here to View Product Video INCLUDED: The Polyscience CA02A1P1-41AA1N Durachill Chiller with Positive Displacement Pump, 1/4HP, 120V, 60Hz is brand-new . Includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - Full 2 Year Parts and Labor Warranty - Two sets of Inlet/Outlet Adapters: ½ inch male NPT x ½ inch hose barb and ½ inch male NPT x 5/8 inch hose barb Polyscience CA02A1P1-41AA1N Durachill Chiller with Positive Displacement Pump, 1/4HP, 120V, 60Hz Specifications Part NumberCA02A1P1-41AA1NCooling Capacity @ 20°C0.85 kWCooling Capacity @ 10°C0.6 kWCooling Capacity @ 0°C0.4 kWFluid Temperature Range-10 to 70°C / 14 to 158°FTemperature Stability±0.1°CTemperature Display Units°C or °FDisplayable Pressure UnitsPSI or kPaPump Inlet and Outlet½ inch female NPTConnectivityRS-232, USB Serial Port Emulation, USB TMC, Dry Contact On/Off/StatusPump Pressure Range45 to 100 psi / 310 to 689 kPaMaximum Pump Flow Rate2.6 gpm / 9.8 lpmPower Requirements120V, 60Hz, 13.6AShipping Weight169 lbs / 76.7 kgShipping Dimensions33 x 22 x 33 in / 84 x 56 x 84 cmComparison of ModelsSpecificationPolyscience CA02A1P1-41AA1NPolyscience CA02A1T1-41AA1NPolyscience CA03A1P1-41AA1NPolyscience CA03A1T1-41AA1NPolyscience CA05A1P1-41AA1NPolyscience CA05A1T1-41AA1NPolyscience CA10A3P2-41AA1NPolyscience CA10A3T1-41AA1NCooling Capacity @ 20°C (kW)0.85 kW0.85 kW1.4 kW1.4 kW1.74 kW1.74 kW2.9 kW2.9 kWCooling Capacity @ 10°C (kW)0.6 kW0.6 kW0.99 kW0.99 kW1.29 kW1.29 kW1.93 kW1.93 kWCooling Capacity @ 0°C (kW)0.4 kW0.4 kW0.53 kW0.53 kW0.77 kW0.77 kW1.0 kW1.0 kWFluid Temperature Range (°C/°F)-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°FPump Pressure Range (psi/kPa)45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPaMaximum Pump Flow Rate (gpm/lpm)2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpmPower Requirements (Voltage/Hz)120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz230V, 60Hz230V, 60Hz.comparison-table tr td:nth-child(2) { background-color: #fffacd; }

Polyscience 6860T56A270D Durachill Chiller with Turbine Pump, Air-Cooled, 5° - 35°C, 5200W, 230V 60H (more)zDuraChill Chillers provide cooling power for demanding applications and serve as an economical alternative to tap water cooling systems. All models feature a microprocessor-based controller, digital Temperature Display (°C or °F), one-touch set point display, and digital Pressure/Flow Rate Display (PSI, kPa, GPM, LPM) with push-Button selection. To optimize cooling efficiency and performance, these sophisticated Chillers also feature a modulated refrigeration system. As a result, temperature stability is greatly enhanced and compressor life extended.Features High capacity cooling for lasers, electron microscopes, and other laboratory applications Small footprint conserves floor space Displays temperature and pressure or flow rate simultaneously User-adjustable temperature, pressure, and flow rate alarms Simple operation and maintenance Air- or water-cooled Positive displacement (PD) or turbine (T) pump; other pump options also available INCLUDED: The Polyscience 6860T56A270D Durachill Chiller with Turbine Pump, Air-Cooled, 5° - 35°C, 5200W, 230V 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Scale WLY for statistic control Scale WLY is intended to fast and precise determination of mass in l (more)aboratory and industrial conditions. The model line is the response for growing market demands concerning simple operation and maximum automation of the weighing process. The scales enables cooperation with barcode scanner, printer, label printer, RFID readers and standard PC devices (mouse, keyboard, USB storage device). Design and functionality All WLY scales is equipped with stainless weighing pan, TFT 5,7'' colourful touch screen and membrane keyboard. As an option the scale enables connection of an additional weighing platform to the terminal. The following functions are available: programmable proximity sensors, programmable printout templates, programmable text information for scale's operation, printouts. Scale WLY/PGC is equipped with modules that put packaged products control into practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scales program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Scale requires two staged verification process. Due to the influence of gravitational acceleration force the scale has to be adjusted on use site. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for pre-packaged products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

Specifications table: Dimensions table (H x W x D): 850 x 1435 x 710 mm

Hersteller: Molecular Devices Modell: SpectraMax M2e Beschreibung: Die SpectraMax® M2 und M2e System (more)e von Molecular Devices sind Multidetektions-Mikroplatten-Reader mit Doppelmonochromatoren, Dual-Mode-Küvettenanschlüssen und Top- und Bottom-Reading-Fähigkeit (Top-Reading nur beim M2). Detektion Modalitäten umfassen Absorption (UV-Vis Abs) und Fluoreszenzintensität (FI). Endpunkt, kinetisches, Spektrum- und Area-Well-Scanning Lesearten und der PathCheck® Sensor ermöglichen die Durchführung homogener und heterogener Mikroplatten-Assays in einem flexiblen System einem flexiblen System durchzuführen. SpectraMax M2 Reader ermöglichen eine einfache Umstellung und Optimierung von Assays mit sehr niedrigem Durchsatz auf Assays mit mittlerem bis hohem Durchsatz, schnellere, präzisere Ergebnisse und Einsparungen bei den Reagenzien. Darüber hinaus können kombinierte Absorptions- und Fluoreszenzintensitäts-Assays mit einem einzigen Lesebefehl durchgeführt werden. Kernmerkmale: - Multi-Detektions-Fähigkeit - Top- und Bottom-Read (nur M2e) - Dual-Mode-Küvettenanschluss - Zwei Monochromatoren - PathCheck und Well-Volumen-Sensor - Validierung von Gerät und Software - Roboter-kompatibel Technische Daten: Absorptionsphotometrische Leistung   Wellenlängenauswahl: Monochromator durchstimmbar in 1-nm-Schritten Wellenlängenbereich: 200-1000 nm Wellenlängenbandbreite: ≤ 4,0 nm Wellenlängengenauigkeit: ±2,0 nm Wiederholbarkeit der Wellenlänge: ±0,2 nm Photometrischer Bereich: 0-4,0 OD Photometrische Auflösung: 0,001 OD Photometrische Genauigkeit (Mikroplatte): < ±0,006 OD ±1,0%, 0-2 OD Photometrische Genauigkeit (Küvette): < ±0,005 OD ±1,0%, 0-2 OD Photometrische Genauigkeit: < ±0,003 OD ±1,0%, 0-2 OD Ebenheit der Grundlinie: < 0,001 OD Streulicht: < 0,05% bei 230 nm Fluoreszenzphotometrische Leistung   Duale Monochromatoren: Schrittweite von 1 nm EX Wellenlängenbereich: 250-850 nm EM Wellenlängenbereich: 360-850 nm Wellenlängenbandbreite (EX, EM): 9 nm Optimierte Top-Read-Empfindlichkeit: 5 pM (Fluorescein) in 96 Vertiefungen Top-Read garantierte* Empfindlichkeit: 15 pM (Fluorescein) in 96 Kavitäten Zeitaufgelöste Fluoreszenz (Sekundärmodus)   EX Wellenlängenbereich: 250-850 nm EM Wellenlängenbereich: 360-850 nm Datenerfassung: 50-1450 µsec. in 200 µsec.-Schritten Garantierte Empfindlichkeit: 7 pM Eu-Chelat Lumineszenz (sekundärer Modus)  Wellenlängenbereich (M2): 360-850 nm Garantierte Empfindlichkeit: 50 fM alkalische Phosphatase Allgemeine photometrische Leistung  Plattenformate: 6, 12, 24, 48, 96, 384 Vertiefungen Lichtquelle: Xenon-Blitzlampe (1 Joule/Blitz) Detektor: Photomultiplier-Röhre (PMT) Lesezeit** 96 Vertiefungen: 384 Vertiefungen: Abs 18 Sek., FI 15 Sek. Abs 49 Sek., FI 45 Sek. Schüttelzeit: 0 bis 999 Sekunden Temperaturkontrolle: Umgebungstemperatur +4°C bis 45°C Temperaturgleichmäßigkeit: < 1°C bei 37°C Sollwert Temperaturgenauigkeit: ±1°C bei 37°C Sollwert Allgemeine Spezifikationen   Leistungsaufnahme: < 125 Watt Leistung: 100-240 Vac, 3 A, 50/60 Hz Abmessungen: 23x16x9 cm Gewicht: 35lbs Lieferumfang: - SpectraMax M2e - Bedienungsanleitung als PDF via E-Mail Das Gerät befindet sich in einem absoluten Top Zustand und wurde 100%  auf Funktion geprüft.