Varian SPS-5 Autosampler

This Thermo Finnigan Trace GC System was removed from a university laboratory where it was surplus t (more)o requirements. All the units are in good, used cosmetic condition, and all power up. We were unable to test them further than this, however. The system comes supplied without a detector. The ECD one that was inside has been retained by the lab. The system consists of: 1 x Finnigan Trace GC Ultra With TriPlus AS Autosampler.1 x Thermo TP100 Sampler Supply It also comes with some spares and cables.

Beckman Coulter Biomek FXp Laboratory Automation Workstation w/ PC and Software This item was remove (more)d from a university lab where it was surplus to requirements. The system powered on with stable status lights. The previous client stated it was in working order when last used on: 24.05.24. The system comprises: - Beckman Coulter FX Device Controller - Cat No.: 719366 - 3 x Inheco Single TEC Control - Part Nos.: 8900031 - Serial Nos.: 2549, 2564, 2537 - Inheco Thermoshake Plate Shaker & Cooler/Heater - Part No.: 7100146-B - Serial No.: 3080 - Year: 2018 - Thermo Scientific Masterflex P/S Easy-Load ll Pump - Model: 1400-1320 - Serial No.: B13001697 - Pump heads model: 956-0025 - Lenovo ThinkCentre M83 with Windows 7 PRO - Model: S11DOO - Serial No.: MJ03JHRD - Lenovo ThinkVision Monitor - Serial No.: V6-D1101 - Year: 2010 - Lenovo Keyboard and Mouse Software and Manuals Included:- Beckman Coulter install disks - Masterflex P/S 1400 series operating manual - Biomek Tutorials and setup guides Also Included:- Various adapters, injector pump plungers, nozzle sets, plastic bottles, holding plates, etc. Specifications:- Model: FXp Workstation - Serial No.: A318440537

This Applied Biosystems MagMAX Express 96 Particle Processor was removed from a university lab where (more) it was surplus to requirements. The item powers on and is in good cosmetic condition with some marks from use. The table Rotation works, but we were unable to test it further without software. Ambion MagMAX 96 Total RNA Isolation Kit Instruction Manual12 x Processing Plate & Lid (PN-10038GA1)

Beckman Coulter Biomek NXp Automated Liquid Handler with PC & Software Lab This was removed from (more) a university lab where it was surplus to requirements. The unit is in reasonable cosmetic condition. It does have various marks and signs of general use.The robot is able to be 'homed' fine and it responds to commands via manual control. The Tiploader also works as it should. This and the gripper require an air compressor which is not included. We used one from stock to test it. The system consists of: 1 x Beckman Coulter Biomek NXp Robot.s/n A318410173.Cat No A31841.96 Well head. 1 x Beckman Coulter Tiploader. 1 x Beckman Coulter AccuFrame. 1 x Microscan MS-3 Laser (Barcode Reader) 1 x Dell Optiplex 380 PC with monitor, keyboard & mouse.This PC is fitted with the HDD from the original Lenovo PC. The PC has the Biomek NX software installed. Version 3.3 build 14.

Perkin Elmer PYRIS Diamond DSC Differential Scanning Calorimeter & Autosampler This was removed  (more)from a university lab where it was surplus to requirements. The unit runs and communicates with the software but has not been recalibrated. This requires the use of gas, which we are not permitted to do on our site. The unit has been partially serviced. A report is available on request. The dongle for the software is not included. The chiller unit has not been serviced. Included are; Perkin Elmer PYRIS Diamond DSC Differential Scanning Calorimeter & AutosamplerPart no. N5360025SN - 536N2011101 Perkin Elmer Intracooler 2P Cooling AccessoryModel no. FC100PED1SN - 18256 Dell Optiplex 380

CyBio CyBi Well Vario Pipetting Robot System - 96-Head & 384-Head This is being sold on behalf o (more)f a university lab. It is surplus to requirements. The unit is in excellent cosmetic condition. It has not been serviced or used for several years but was in good working order prior to this. It also has incorporated a small robotic arm that can pick up racks/plates and a capper/decapper for microtubes (FluidX or Matrix) with septum seals. We have installed a new HDD with Windows 7 on the PC.The CyBio Composer V2.10 software is included and also installed on the PC.The software will require setting up before use. The system includes the following: CyBio CyBi Well Vario Pipetting Robot System Right:-CyBi - Well vario 384/40OL3381 1 1011 Right Right Stacker - 0027 1 8014Right Left Stacker - 0027 1 8011 CyBi - Well vario 96/250OL3381 1 1010 Left:-Left Right Stacker - 0027 1 8006Left Left Stacker - 0027 1 8007 Comes on 2 x trepsa tablesTable dimensions - L180 W90 H84cm PC - Dell Precision T1650Comes with Dell 17" Monitor, keyboard & mouse Other parts incuded:- Fluid X Xdc-96proModel - HT112E/MISN - 40.165 4 x 6L Nalgene Water Containers Moxa UPort 1610-16 USB to 16 Port RS-232 Serial HubSN - TABF01136349 CyBio Power Supply0L3901 1 4003 CyBio Power Supply3402 5 8135 CyBio Expansion Module0026 4 4103 CyBio Expansion Module with 2 x easy-load MasterFlex 7518-000026 3 7210 CyBio Expansion Module with 2 x easy-load MasterFlex 7518-000026 3 7206 2 x Gilson Tube Rack holders Voyager Barcode Scanner 2 x Boxes of Eppendorf 384 PCR Plates (300 PER BOX)1 x Box CyBi TipTrays 384 - 25ul 6 x 4 Trays1 x Box CyBi - TipTrays 96 - 250ul 6 x 3 Trays Tables not included.

PHCBI Cooled Incubator Model Type MIR-154 Labs This item was removed from a university where it was  (more)surplus to requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition internally and externally. This item requires a passcode to operate, which is available on request.

Multi-risk cabinet 120 liters sliding door A1T TRIONYX Safety cabinet for chemical products With 4 r (more)etention tanks With a key Type: Drawer door Number of doors: 1 Width (cm): 56 cm Depth (cm): 50 cm Height (cm): 182.5 cm Maximum load (kg): 120 kg Material: STEEL Color: WHITE RAL: 9010 With some traces of rust

Are you overwhelmed by the number of production processes? What about having them all under control? (more) To be able to analyse and correct them in real time? After all, it is the key to increasing the efficiency of the production line! Our clients, the factory owners, were the ones who told us about their problems and needs. Our answer is simple: the E2R System. This software is designed to make your work easier. The E2R System consists of six independent modules: 1. E2R Weighing, 2. E2R Weighing Records, 3. E2R Formulations, 4. E2R PGC, 5. E2R Checkweigher, 6. E2R Moisture Analyzer. Choose the best module for your company. With the E2R Formulations module, you can: create formulations; manage formulations; create simple reports of the carried out formulations; support E2R System databases such as “Products” and “Operators”; exchange data with external programs via the Data Synchronisation Module; change the application’s skins. And with the E2R Formulations module compatible with PUE HY10, PUE 7.1 and PUE 5 terminals, you can: preview the carried out measurements, carry out formulations based on production orders, determine the amount of each formulation ingredient, determine the tolerance of the weighed ingredient, dose the formulation up to a specified mass, integrate with the Data Synchronisation Module, carry out production orders, define the permission levels for specific operators, carry out production orders with batches, weigh remains of each batch portion, perform multiple weighing procedures of one ingredient, weigh each ingredient of the formulation on a different scale or platform, enter the batch number after each weighing, carry out formulation with the dosing function, carry out production orders on several scales, repeatedly carry out formulations, manage the “Formulations” and “Orders” databases, carry out production orders divided into phases, hold up formulations and production orders performance, operate receipt and label printers, label directly from the PUE 5 terminal.