Thermo Dispenser Multidrop Combi Reagenzienspender Reagent Dispenser

Beckman Coulter Biomek 4000 Automated Laboratory Workstation This was removed from a university lab  (more)where it was surplus to requirements. The unit powers up and is in good working order. It was serviced in 2022 and has not been used since. It is in excellent cosmetic condition with marks from use. PC & Accessories:-Lenovo ThinkCentre PCViewSonic 21.5" MonitorDell Keyboard & Mouse PC has Biomek Software Version 4.1 Comes with a box of spare parts including cables, blocks and adaptor plates.

This Beckman Coulter Biomek NXp Laboratory Automation Workstation was removed from a university lab  (more)where it was surplus to requirements. Everything powers up and the system is in good cosmetic condition with some marks from use. There appears to be an issue with at least one of the injectors. When we attempt to 'home' the robot head it will start to home the various parts, then stall and with an error code 'error homing: Y2 Axis error: Motion error; the axis was unable to perform the specified move. (0100) We believe the issue is with the #2 injector side-to-side motor. The up-and-down motor appears to run well. This error makes it impossible to home the system. So it could not be tested any further. The system comprises of; 1 x Beckman Coulter Biomek NXp Laboratory Automation WorkstationCat no. A31840Unit dimensions - W77 L92 H98cm 1 x IBM ThinkCentre PCMT-M 8113-DA1Biomek Software Version 3.3 installed. 1 x Lenovo MonitorType - 9227-AC1 1 x Lenovo Keyboard 1 x IBM Mouse 2 x Nalgene 2 Gallon Waste/Supply Bottles Box of Accessories:-Beckman Coulter AccuFrameBeckman Coulter Vacuum Valve UnitPower AdaptorVarious cables8 x 2ml Tube holders (24 tube slots in each)94 x 2ml tubesVacuum Manifold Base23mm Spacer Collar PN 71975136mm Collar3 x Thermo Scientific 96 well 0.2ml plates.

This was removed from a university lab where it was surplus to requirements. The unit powers up but  (more)has not been tested further. It is in good cosmetic condition with minor marks.

Beckman Coulter Biomek NX S8 Laboratory Automation Workstation This was removed from a university la (more)b where it was surplus to requirements. The system powers up, communicates with the PC and is in good working order. It is in good cosmetic condition with minor marks from use. Included are; Model - Biomek NX S8SN - 9898860170 Beckman Coulter Biomek Valve unitCat no. 719657SN - 5080667 PC Accessories include:Lenovo ThinkCentre PC - Has Biomek software version 4.1AMW 17" LCD MonitorLenovo keyboard & mouse Box of accessories/consumables includes:-CablesBeckman Coulter Tube Rack (Boxed)Beckman Coulter Image MORBM33A Recovery DVDAcronis True Image 2016 #1 Backup Solution DVDBeckman Coulter Biomek Seal & Sample Aluminum Foil LidsBeckman Coulter SPAN-8 P250 COND.N/S Tips (1 Rack)2 x Beckman Coulter Modular Reservoir Quarter Module 19ml (Cat-372788)Beckman Coulter Modular Reservoir Full Module 150ml (Cat-372784)Beckman Reservoir holder (Cat-372795)Beckman Capstrip (267002)3 x Packs Blue 13mm Inserts (5 Per Pack)3 x Packs Red 12mm Inserts (5 Per Pack)3 x Packs Black 10mm Inserts (5 Per Pack)1 x Pack White 11mm Inserts (5 In Pack)Bag of mixed Tecan syringesBack of 4 gaugesLead Screw with nut (Ref-989458)Elektroden EL8/4V (B-3204021)

A Simple Western size assay is an automated Western – no gels, no transfer devices, no blots, no fil (more)m and no manual analysis. Simple Westerns take place in a capillary. Wes automates all steps of the process for you including sample loading, protein separation, immunoprobing or labeling, washing, detection and data analysis. Up to 25 samples can be processed in a single run. Wes performs Simple Western size-based assays: Immunoassay and Total Protein assay. All you have to do is pipette your samples and immunoreagents into Wes’s pre-filled plate, load the capillary cartridge and press start. Sample Required Total Protein: 0.3-1.2 µg lysate Sample Required Immunoassay Charge: 0.6-1.2 µg Volume Required Total Protein: 3 µL/well Volume Required Immunoassay Charge: 3 µL/well Size or pI Range Total Protein: Molecular weight (MW) ladders range from 2-440 kDa Size or pI Range Immunoassay Charge: Molecular weight (MW) ladders range from 2-440 kDa Sizing CV Total Protein: <10% Sizing CV Immunoassay Charge: <10% Intra-assay CV Total Protein: <15% Intra-assay CV Immunoassay Charge: <15% Resolution (± percent difference in MW) Total Protein: ± 15-20% for MW <20 kDa, ±10 % for MW > 20 kDa Resolution (± percent difference in MW) Immunoassay Charge: ± 15-20% for MW <20 kDa, ±10 % for MW > 20 kDa Quantitation CV Total Protein: <20% Quantitation CV Immunoassay Charge: <20% Dynamic Range Total Protein: 2-3 logs Dynamic Range Immunoassay Charge: 3 logs Sensitivity Total Protein: ng Sensitivity Immunoassay Charge: Low pg Capillary: 5 cm, 100 µm, 400 nL Dimensions (HxWxD): 360 x 360 x 570 mm Weight: 23 kg

The Waters 2707 Autosampler is a compact, versatile module for highly precise and reproducible injec (more)tions into am LC or LC/MS system. Perfect for automated, routine LC requirements, this easy-to-use and rugged autosampler meets a wide varierty of sampling needs in pharmaceutical, chemical, and environmental laboratories.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

PS R2.H series balances redefine the level of standard precision balances. Not only do they share al (more)l the features of R series balances, but can also work in adverse operating conditions (condensed dust, drops of water falling down at different angles typical for IP 54). LCD display These balances are equipped with innovative LCD display allowing for clear and legible presentation of a measurement result. Moreover, it offers new text line which supplies the user with some additional messages and information, e.g. product name or tare value. Interfaces Additional asset of PS R2.H balances are their interfaces build-in a hermetic closed housing which is separated from the balance. The interfaces include 2&times;RS 232, USB type A, USB type B, and Wireless Connection optionally. Balance housing is made of plastic, whereas its pan of stainless steel. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

M1 Mass Standard - knob weights. Nominal value - 100 g.

Speed I: 25 – 250 rpm Speed II: 200 – 2000 rpm Dimensions (DxHxW): 280 x 280 x 100 mm