Agilent 6890N with FID 7683 autoinjector and tray

Perkin Elmer Chemagic 360 DNA Extractor Magnetic Separator System This system was removed from a uni (more)versity where it was surplus to requirement. It is in good cosmetic condition and powers on. We tested the system with a security key taken from another Chemagic we had in stock, although the system booted up it displayed a 'Door Open' error that prevented the system from initializing.Due to this, this system is listed as Spares/Repair. Security Key not included. This system also includes the following: - Chemagic 96-rod head - Instruction manual - Touch-screen monitor - 5 x 96 well microplates/holders - 1 x Newland wired scanners with stand - table

This item has just arrived in our stock. Please enquire for further details.

This CTC Analytics HTC PAL MXY 04-01A Autosampler System was removed from a university lab where it  (more)was surplus to requirements. The system powers up and is in good cosmetic condition. Any issues with the individual modules are listed below. Included in the system are; 1x CTC Leap Technologies AutosamplerModel MXY 04-01A 1x CTC Injection UnitModel No. MZ 01-00F 1x CTC Stack Cooler DWModel MC 04-01 Rev. GThe drawer doors have come away (plastic screws snapped) 1x CTC Power SupplyPart No. MN 01-00 1x CTC Pelter ThermostatPart No. MN 03-00 1x CTC TerminalModel No. 01-00A 1x CTC Injection Valve Drive unitModel No. MV 02-01A 1x CTC Arm PlatformModel No. MR 034-02B 1x Motor Assembly Syringe PalModel No. MM 01-01F 1x Active Reverse Rinse UnitSer No. SDS1208007 1x XP power supplyModel AED45US24 1x Syringe Holder:Model No. MSU 014-00A The unit is in good cosmetic condition. 1x Citation High Performance Sample LoaderThe PC powers on and is in good cosmetic condition. There is a Leap Technologies program on the Sample loader Other Control Programs:• Solvent Conditioner Control 2.16•One Minute NMR 2.18.43•Citation Control 2.4 1x Protasis Desgasser 1x Reloatable Power TapModel PDU20BHVIEC 10R 8x IEC ports Accessories: 2x PAL System X Type Syringes:Part No. 20452/01 • 100µl Hamilton Gas tight glass Syringes2x 5.0ml 1x 1000µl 1x 0.25µl The units are in good cosmetic condition. 1x L-Mark glass Syringe:F/N 0.72(G22s)b51•50µl The unit is in good cosmetic condition (with needle) 100ml Wheaton Glass bottles: 3x with lids2x without lids The units are in good cosmetic condition. 500ml Glass bottles1x Simax (with lid) 1x Boro 3.3 (without lid) The units are in good cosmetic condition.

Varian 450-GC GC Gas Chromatograph This was removed from a university lab where it was surplus to re (more)quirements. The unit powers up and is in good cosmetic condition with minor marks. Filters:1x Moisture Filter CP17911x Oxygen Filter CP17970

This was removed from a university lab where it was surplus to requirements. Included are; Gilson 26 (more)8 PipetmaxModel no. 32100001SN - 321D6A042Unit dimensions - L63 W52 H70cmThe item powers on and is in reasonable used cosmetic condition, there are a few cracks around the unit on the perspex covers. Windows TabletModel no. 32000321SN - 66MCV22The tablet automatically starts up Gilson Trilution Software. We have the password available on purchase. Gilson Model GCP Dell DocSN - G00M-A00 3 x Gilson Dongles:-LT3204USB PIPETMAX Docs v2 Reference Docs 1.1LT3203USB TRILUTION micro V2 Documentation v1.2Blue Dongle labelled Trilution Gilson 5mm Allen Wrench (4320502)AC Power Adaptor Consumables:-6 x Boxes of Eppendorf epT.I.PS. Motion 1 - 50μl (15 x 96 Tips in Racks) Full & Sealed inside1 x Box of Eppendorf epT.I.PS. Motion 1 - 50μl (10 x 96 Tips in Racks) 9 Sealed inside6 x Boxes of Eppendorf epT.I.PS. Motion 1 - 20-300μl (15 x 96 Tips in Racks) Full & Sealed inside1 x Box of Eppendorf epT.I.PS. Motion 1 - 20-300μl (11 x 96 Tips in Racks) Sealed inside16 x Boxes of Gilson DL10 Diamond Reload Packs (960 Tips per box Volume Range 0.1 - 20μl)1 x Box of Gilson DL10 Diamond Reload Packs (257 Tips in box Volume Range 0.1 - 20μl)18 x Boxes of Gilson DL200 Diamond Reload Packs (960 Tips per box Volume Range 2 - 200μl)1 x Box of Gilson DL200 Diamond Reload Packs ( 192 Tips in box Volume Range 2 - 200μl)

The ASP2000 is a precision micro-stepping, high torque drive “workhorse” liquid handler Autosampler  (more)that delivers robust performance for fast and accurate sample preparation and direct injection into UV and HPLC systems. The ASP2000 is suitable for a wide variety of applications with the ability to pierce multiple septa with very high accuracy and repeatability. It also has the ability to inject into tiny injection ports. This unique, near-perfect design of hardware and software performs sample processing tasks effortlessly with seamless integration with the IDIS data management system configurations. Including a Icalis DXi-50 pump and a Icalis RS8 remote serial controller.

LABORATORY INCUBATORS CLN SMART POL-EKO CLN - NATURAL AIR CONVECTION CLN Series incubators maintain  (more)a constant temperature from 5°C above room temperature to a maximum of 100°C. Large touch display, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading, you will be surprised! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The CLN SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Powder coated sheet metal structure (graphite front panel) - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +37°C) CLN SMART SERIES The six models of the CLN series cover most of your needs: from mini stoves to the 245 liter internal volume model. For larger volumes, look at the SLW series stoves. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for CL models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - Door with viewing window - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20 / 60 / 100 mm access door - Additional 30 mm access door - Castors - Table with castors

Memmert IF450plus Forced Circulation Incubator 449L, 115V Working Temperature Range Min. 10°C above (more) ambient up to +80°C Convection Type Forced Air Chamber Volume 449 L (15.9 cu.ft.) Features - Setting temperature range from +20°C to +80°C with 0.1°C accuracy - Volume of 449 L (15.9 cu.ft.) with easy-to-clean stainless steel interior - Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring - TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture - AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB - Function SetpointWAIT ensures the process begins only after the set temperature is reached - Sterilization program for chamber cleaning at 160°C for 4 hours The Memmert IF450plus Forced Circulation Incubator 449L, 115V provides precise temperature control with a working range from Min. 10°C above ambient up to +80°C and 0.1°C accuracy, making it an ideal solution for sensitive laboratory applications. With a large 449 L (15.9 cu.ft.) stainless steel chamber, this incubator offers ample space and is designed for durability and easy cleaning. The TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller features dual high-definition TFT-color displays, enabling precise adjustments of temperature, fan speed, and other critical parameters. Equipped with AutoSAFETY features, the IF450plus offers over- and undertemperature monitoring along with a mechanical temperature limiter TB for enhanced safety. The forced air circulation system allows for fan speed adjustments in 10% increments and includes a pre-heated fresh air admixture for consistent performance. The Function SetpointWAIT ensures that the process only begins when the set temperature is reached, ensuring reliable outcomes. Additionally, the fixed sterilization program provides thorough chamber cleaning at 160°C for 4 hours, ensuring a hygienic environment for sensitive experiments. INCLUDED: The Memmert IF450plus Forced Circulation Incubator 449L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

KNF IP65 FEM 1.02 FT.18S Liquid PumpKNF SIMDOS diaphragm pumps offer a variety of options to suit mo (more)st laboratory liquid metering and dosing needs. The FEM 1.02 ST.18S version has a liquid transfer flow rate of 0.03 – 200 mL/min and discreet dosing volumes of 0.03 – 999 mL. It is constructed with the following chemically-resistant flow path materials: stainless steel head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 02 pumps are self-priming up to 6.6 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue.INCLUDED: The KNF IP65 FEM 1.02 FT.18S Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Boekel Scientific 270200 Orbital Shaker (platform required), 115V/230V The Boekel Scientific Orbital (more) Platform Shaker is optimal for mixing bottles, flasks and beakers due to the smooth horizontal motion. The unit is versatile and has a small footprint ideal for any lab. Orbital shakers move at a slow speed in a circular motion to slowly shake cultures, mix, and in a laboratory setting. Orbital shakers do not vibrate on countertops and do not produce heat, making them perfect for culturing sensitive microbes. Boekel orbital shakers have are designed to save space and even fit inside incubators. Features: •Small foot print, reciprocating/orbital shaker •Smooth horizontal orbital motion for mixing in bottles, flasks, and beakers •Soft start and noise-free operation •Platform not included. See interchangeable platforms. •Power Pack is CSA, UL, CE approved •Can be used in an incubator 4°C to 40°C INCLUDED: The Boekel Scientific 270200 Orbital Shaker (platform required), 115V/230V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty