2 x LKB Wallac 1291 Reagent Dispensers Lab

Thermo Scientific Spinnaker Robotic Arm F01981 Lab This item was removed from a university where it  (more)was surplus to requirement. It is in very good cosmetic condition, but we are unable to test it as it requires a connection to the full system to operate. This item also includes the following: - Emergency Stop Button - MicroPlate Mount

Interscience Spiral easySpiral Pro Automatic Spiral Plater This was removed from a university lab wh (more)ere it was surplus to requirements. The item powers on and appears to run through test sequences. The item is in a reasonable, used cosmetic condition with marks from use.

Demo device. Unused & in original packaging. 2022 model. Great condition. 6 months warranty. Technic (more)al specifications: - External dimensions (WxDxH): 780 x 970 x 945 mm - Internal dimensions (WxDxH): 607 x 670 x 629 mm - Internal volume: 255 l (usable: 162 l) - Rack dimensions: 560 x 500 mm (capacity: 12 pcs., scope of delivery: 3 pcs.) - Max. weight load per rack: 10 kg - Max. weight load per device: 30 kg - Device weight: 97.5 kg - Adjustable temperature: +3 °C - 55 °C - Ambient temperature: +18 °C - +34 °C - Temperature deviation: +/- 0.1 °C

MWMH series modules are not offered or distributed in the following countries: Germany, Switzerland, (more) Italy, Japan and the USA. Vast Max Capacity Range Magnetoelectric weighing modules MWMH are intended for mass measurement ranging from 1kg to 10kg. Minimum readability of 0.01g guarantees amazing accuracy for your measurement. Protection Against Challenging Conditions Hermetic versions of modules feature stainless steel housing with IP65 and IP69K. This allows operation even in the most challenging conditions. Mechanical design lacks sharp edges and gaps which ensures adherence to HACCP, GMP and FDA standards for safety and quality of operation. Fast and Precise Measurement High measurement accuracy with sd=1d* guarantees both readout of real weighing results and repeatability of indications. Cutting-edge design solutions provide fast measurement which is an asset allowing to install the module on automated production lines. Intended for fast and dynamic measuring processes the weighing module’s converter throughput is 3200 meas./s. Cooperation with terminals Connecting the module to a multifunctional weighing terminal expands communication interfaces range and increases usage in industrial applications. Mechanical design versions: MWMH xxx - 1 - model with Binder connectors (IP65), MWMH xxx - 2 - model with Binder connectors, (IP65), power supply and control of the transporter on a weighing pan, MWMH xxx - 3 - model with cable glands, (IP 69K), MWMH xxx - 4 - model with cable glands (IP69K), power supply and control of the transporter on a weighing pan MWMH xxx - TWD - model with cable glands (IP 69K).

MA X7.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Corepoint Scientific PRF102WWW-040 Solid Door Laboratory Combo 1C to 10C Refrigerator/-37C to -43C F (more)reezer Temperature Setpoint Range Refrigerator: 1C to 10C / Freezer: -37C to -43C Capacity 5.2 cu. ft. Refrigerator / 4 cu. ft. Freezer Defrost Method Refrigerator: Cycle / Freezer: Manual Features - Compact, space-saving design with a versatile 1°C to 10°C refrigerator and -15°C to -25°C freezer combo, ideal for maximizing facility floor space - Two solid, right-hinged, self-closing doors with recessed handles and magnetic gaskets ensure a secure, positive seal to maintain optimal temperatures - High-density urethane foam insulation in the cabinet and doors for superior temperature retention and energy efficiency - Three adjustable shelves in both the refrigerator and freezer, equipped with guard rails to prevent items from being pushed against the back wall - Advanced microprocessor temperature controllers and digital displays allow for precise temperature management and monitoring - Forced draft air circulation in the refrigerator ensures consistent cooling throughout the storage space The Corepoint Scientific PRF102WWW-040 is a compact, freestanding laboratory combo unit that includes a refrigerator and a manual defrost freezer. Designed to maximize facility floor space and efficiency, this unit features separate chambers for refrigeration and freezing, each with its own microprocessor temperature controller and digital display for precise temperature control and recovery. The refrigerator has a capacity of 5.2 cu. ft., maintaining temperatures between 2°C to 8°C, while the freezer has a capacity of 4 cu. ft., with an operating range of -37°C to -43°C. Both compartments are equipped with audible and visual high and low temperature alarms, two probes (one in air and one in a sample bottle), and remote alarm contacts to ensure the security of critical samples. The unit includes three adjustable shelves in each chamber, a bottom footed shelf for air circulation, and a back wall evaporator cover. Additional features include keyed door locks, magnetic door gaskets for a positive seal, recessed door handles, a stacking kit, leveling legs, LED interior lights, and a probe access port. The white cabinet and doors are insulated with high-density urethane foam, using HFC-free refrigerant (R600a) for the refrigerator and natural hydrocarbon refrigerant (R290) for the freezer, ensuring an environmentally friendly operation. INCLUDED: The Corepoint Scientific PRF102WWW-040 Solid Door Laboratory Combo 1C to 10C Refrigerator/-37C to -43C Freezer includes: - Stacking Kit - Leveling Legs - 3 x Adjustable Refrigerator Shelves - 3 x Adjustable Freezer Shelves - Key for Door Lock - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Boekel Scientific 25515016 Cement Autoclave The Cement Autoclave consists of a welded ASME certified (more) steel cylinder with a bolted cover mounted on a sturdy supporting frame and enclosed in a heat insulated metal housing. The unit is designed to handle pressure in the 60-350 psi (0.4 -2.4 MPa) range and consists of steam vessel, pressure regulator, pressure gauge (0-600psi), air vent valve, power switches, and a safety pop valve set at 350 psi. All components are pressure tested and designed to meet the highest safety standards. The autoclave consists of a welded steel cylinder with bolted cover, mounted on a sturdy supporting frame and enclosed in a heat insulated metal housing. The steel cylinder is fitted with a high temperature gasket and a heavy cover held in place by 16 cap screws bearing upon washers. A T-Handle wrench supplied with the autoclave may be used to tighten the nuts gradually and uniformly to make a leak-proof assembly. The cylinder assembly is designed for a safe working pressure of 525 PSIG, or one and one-half the maximum working pressure. A safety valve set to release at 350 PSIG is provided for protection and modification is not recommended for safe operation. A dial pressure gage indicates the steam pressure in PSIG. Temperature readings are taken with a No. NP22507 thermometer ASTM #2F, which is placed in the thermometer well provided in the cylinder cover. An air-vent valve allows the escape of entrapped air during the early part of the heating period and releases any steam pressure remaining at the end of the cooling period. The autoclave is heated by two electric heaters attached to the cylinder. The heating unit is controlled from a switch panel on the control box. The control box houses the pressureregulator. A main toggle switch controls the entire electrical circuit including the automatic regulator. Separate on-off toggle switches, in series with pilot lights, control the current to the two heating elements. Switch functions are indicated on the switch panel.INCLUDED: The Boekel Scientific 25515016 Cement Autoclave includes: - Wrench, Thermometer, and 5 Gaskets - Manufacturer's Documentation - 2 Year Manufacturer's Warranty