NEW! Cytiva GE 28-9564-02 Cassette for fraction collection in 50 mL tubes

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This LDC Analytical Solvent Delivery System Consta Metric 3200 was removed from a university lab whe (more)re it was surplus to requirements. The unit powers on and is in good cosmetic condition. There are some light scuffs and scratches around the unit from general use. We were unable to test ti further at our facility.

Amersham Biosciences ATKA FPLC System, P-920, UPC-900, Frac-950, M-925 Lab This system was removed f (more)rom a university lab, where it was surplus to requirements. All included units are in good cosmetic condition and power on, we are unable to test them further as a system at our facility. This system consists of the following: - 1 x Amersham Biosciences ATKA P-920 - 1 x Amersham Biosciences ATKA UPC-900 - 1 x Amersham Biosciences ATKA Frac-950 with 2 x Tube holders. - 1 x Amersham Biosciences ATKA M-925 - 1 x Amersham Biosciences ATKA INV-907 - 1 x Amersham Biosciences ATKA IV-908 - 1 x Lamp.

Applied Biosystems/MDS SCIEX Pro ID Software V1.1 This was removed from a university lab where it w (more)as surplus to requirements. The item is in reasonable cosmetic condition. There are some minor marks on the disc. The case has some signs of wear. Also included are the following:1x Pro ID Software 1.1 Release Notes1x Validation Certificate, dated 05/01/2005

Food scale Valor 4000 Ohaus The OHAUS Valor 4000 Water Resistant Food Scale is an exceptional tool t (more)hat will enhance your workplace beyond your expectations thanks to the winning combination of touchless operation, speed and durability. Valor 4000 has been designed for wet and dry environments, offers two large LED displays, one front and one rear, food safety, trade clearances and anti-puncture keypads. Perfect. - NSF certified, USDA-AMS approved and supports HACCP certified systems: for the most complex food processing applications. - Touchless tare sensor, half second stabilization time, weight control and percentage weighing with colored LED indicators: increased productivity and less stress. - Cut-resistant keyboard and IP68 protection for extreme and wet working conditions. - The unique cut-resistant keyboard and IP68 protection ensure durability and safety, in both extreme and wet working conditions. - Increase productivity thanks to the touchless tare sensor, half second stabilization time, checkweighing and percentage weighing mode with colored LED indicators. - The Valor 4000 model for food applications is NSF certified, USDA-AMS approved and supports HACCP certified systems making it suitable for the most demanding food processing applications. Applications Weighing, percentage weighing, weight control, summation Display LED display Operation AC adapter (included) or rechargeable battery (included) Communication N / A Structure ABS construction with stainless steel platform, front illuminated level indicator, rear touchless sensor Construction features Self-closing power socket cover, menus and messages for navigation in configuration mode on keys, carrying handle

A homogenizer is a laboratory or industrial instrument used for the homogenization of various types  (more)of materials, such as fabrics, plants, food, soil and many others. The OV 625 Digital laboratory disperser guarantees the highest level of reproducibility for a wide range of laboratory applications. Cutting-edge technology and engineering, like all Velp scientific products, guarantee precision and high shear force for rapid homogenization, emulsification, suspensions and high-speed mixing of biological tissues, pharmaceuticals, cosmetics and food products. Excellent mechanical properties and high chemical resistance make it suitable for even the most demanding laboratory challenges. DISPLAY AND CONTROL Bright, intuitive LED display and rotary knobs allow you to fine-tune the speed between 3,000 and 25,000 rpm. Clear speed information on a black background aids visibility in all conditions. SAFE AND RESISTANT Safety features ensure maximum operator protection. For example, once the set point speed has been set, the OV 625 Digital will reach it gradually. In addition, various alarms warn the user in case of overload and overtemperature. The resistant and hermetic structure allows correct operation even in the most difficult conditions. Warranty up to 3 years. For maximum comfort, choose the model with the double pole stand. CHOOSE THE SUITABLE ACCESSORY Choosing the right dispersing tool is essential to achieve maximum performance and high reproducibility. VELP dispersion tools are made of stainless steel (316L) and equipped with a PTFE seal, to be compatible with different types of samples and reagents. To handle different fluids, different dispersion tools are required. In some applications it is necessary to use two dispersing tools in order to achieve a final fineness level from coarse to fine. Thanks to a knob and a quick fastening system, inserting and changing the dispersion tool is simple and fast: in seconds you can switch from one application to the next. FOCUS ON THE PRODUCT What is a disperser? The disperser can be called in several different ways: homogenizer; Cell Lysor, High Shear Mixer, Polytron, Stator Rotor Homogenizer, Sonicizer or Tissue Tear. The various nomenclatures are due to the various uses of this tool and you have different results that can be obtained through the accessories. Essentially, a disperser is used to create a uniform mixture by forcing the sample through a narrow, confined space. Blade homogenizers, such as Velp's OV 625 Digital, use the blades as a rotor for dispersing. How does it work? The dispersing tool consists of a rotor rotating at high speed inside a stationary stator. The area between the rotor tip and the stator slot is called the shear gap. Thanks to the high circumferential velocity, the fluid is drawn axially into the dispersion head and forced radially through the cutting gap, breaking up the particles.

Memmert UF260TS Forced Circulation Pass-Through Oven 256L, 115V Working Temperature Range At least  (more)10°C above ambient to +250°C Setting Resolution (Temperature) Up to 99.9°C: 0.1°C / From 100°C: 0.5°C Chamber Volume 256L (9.04 Cu. Ft.) Features - Working temperature range from at least 10°C above ambient to +250°C - Volume capacity of 256L (9.04 Cu. Ft.) with stainless steel interior - TwinDISPLAY with adaptive multifunctional digital PID-microprocessor controller and dual high-definition TFT-color displays - Forced air circulation adjustable in 10% steps, with pre-heated fresh air admixture - AutoSAFETY system with integrated over- and undertemperature protection - Supports up to 9 shelves with a maximum chamber load of 661 lbs - Three freely selectable temperature calibration points - Function SetpointWAIT ensures process begins only once set temperature is reached The Memmert UF260TS Forced Circulation Pass-Through Oven 256L, 115V is designed to provide exceptional precision and reliability for temperature-sensitive processes. With a working temperature range of 10°C above ambient to +250°C and a spacious 256-liter stainless steel interior, this oven is perfect for demanding laboratory and industrial applications. The TwinDISPLAY system, featuring two high-definition TFT-color displays, allows for precise control, while the adaptive multifunctional PID-microprocessor controller ensures accurate and uniform temperature management. Forced air circulation can be adjusted in 10% increments, with a pre-heated fresh air admixture, enhancing efficiency and temperature stability. This pass-through oven offers advanced safety features, including the AutoSAFETY system with integrated over- and undertemperature protection, along with visual and acoustic alarms. With support for up to nine shelves and a maximum chamber load of 661 lbs, the UF260TS can accommodate large samples or multiple smaller items with ease. Additional features such as the SetpointWAIT function, which ensures the process begins only after the set temperature is reached, and the HeatBALANCE function, which optimizes heating performance, make this oven a valuable asset for any lab or production environment. INCLUDED: The Memmert UF260TS Forced Circulation Pass-Through Oven 256L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - Base Cladding with Screw Connection - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

HRP EX Platform Wherever high readability and precision are important. Wherever good repeatability i (more)n harsh industrial conditions matters. HRP EX Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others HRP EX Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment HRP EX Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential HRP EX Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

Stainless steel platform scale with four sensors No matter where you place the load on the platform, (more) the result will always be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The membrane keyboard is another argument in the discussion of the water resistance of this scale. If you need a dual-range scale, we can make one for you at an extra cost.

IKA Tube Mill 100 control Speed Range 5000 - 25000 rpm Feed hardness max. 5 Mohs Process type Batch  (more)Features - Transparent grinding chamber and cover for real-time observation of grinding tests - Suitable for hard (up to 5 Mohs hardness), dry, and brittle materials, ideal for seeds like corn and wheat - Mill safety feature: starts only when the hood is closed - Clear OLED display with multilingual support and error code visibility - Timer adjustable from 5 seconds to 3 minutes for controlled operations - USB interface for controlling and documenting all operational parameters - Optional interval operation for versatile processing - Infinitely variable speed from 5,000 to 25,000 rpm for precise control - Programmable and storable test conditions for repeatability The world’s first patented Tube Mill 100 control is a batch mill with disposable grinding chambers. Eliminates possibility of cross-contamination and the effort of cleaning. The Tube Mill 100 control accommodates larger grinding chambers with a maximum volume of 100 ml (MT 100) The grinding chamber and cover are made of a transparent material so grinding tests can be observed at any time. The mill can be used for hard (Mohs hardness up to 5), dry and brittle materials. It is especially suitable for grinding seeds, such as corn and wheat.INCLUDED: The IKA Tube Mill 100 control includes: - MT 100 milling tube - MT 40 milling tube - MMT 40.1 Multi-use milling tube - Coupling extractor - USB A-B Cable - Manufacturer's Documentation - 2 Year Manufacturer's Warranty