Selecta Prebatem

PSM / ESCO AIRSTREAM PLUS (AC2-5E8-TU) 1.5m microbiological safety cabinet New equipment in its orig (more)inal packaging Complete pack including: PSM ESCO Airstrem plus class II AC2-5E8-TU length 150cm (1.5m) A UV-30A UV lamp A fixed support with leveling feet Height: 71cm SAL-5A0 GEN2 2 internal sockets TüV NORD EN 12469 certified model Automatic regulation and malfunction alarm and dry contact for alarm report Dual economical motors ensuring permanent and stable flow control Removable stainless steel worktop, with a large work surface and inclined underplane for liquid retention LED lighting Control panel with clear flow display, window position Silent operation The PSMs are equipped with 2 electrical sockets and a UV lamp Depth without armrests: 767 mm / with armrest: 823 mm Motorized front window, stops at the working position External stainless steel armrest on the entire front part Nominal size: 1.5 m External dimensions: 1645 x 767 x 1400 mm (L x D* x H) Internal dimensions: 1525 x 580 x 654 mm (L x D x H) External depth without / with armrest: 767 / 823 mm Weight: 293 kg Model: AC2-5E8-TU Gross weight: 309 kg Gross dimensions: 172 x 90 x 174 cm The sheet metal slide covers are slightly deformed at the bottom, but this does not hinder the proper operation of the PSM or the opening and closing of the window Year of manufacture: 2016

This Labcaire Class II Biological Safety Cabinet Model - BH12 was removed from a university lab (more) where it was surplus to requirements. It was last used 3 years ago and the lab were confident it was working. The unit powers up and both the fans and the white lights are working. There is no UV light fitted. It is in reasonably good cosmetic condition but the metal cover for the bottom is missing its latches and won't quite fit. Inside dimensions - D62.5 W120 H70cm Hours - 14001.4

This Bigneat F3-XIT-D Powder Weighing and Handling Cabinet was removed from a university lab where i (more)t was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with some marks and paint chips/rust from use.

Nuaire Class 2 Biological Safety Cabinet NU-437-400S This was removed from a university lab where it (more) was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

Selecta PREBATEM TFT refrigerated incubator. Digital. 36 L capacity. Temperature range from 5 ºC to  (more)60 ºC. Stability ±0.1°C, homogeneity ±0.3ºC. Forced ventilation. Microprocessor control. Two shelves. RS 232 output. Safety thermostat. Dimensions (W*H*D): external 650*600*490 mm; internal 400*300*300 mm. 54 kg. User manual. The Selecta PREBATEM TFT refrigerated oven for adjustable temperatures from 5°C to 60°C is used in thermal treatments of samples for drying, curing, cultivation or conservation at constant temperature. It is suitable for applications in biotechnology, bacteriology, plasma fractions, biology, enzymatic test, metrology, cosmetics, water analysis, among others.

Integra Vacusafe aspiration system for cell culture with integrated pump with vacuum control, 4 L sa (more)fety coated glass bottle with lid with quick coupling, self-closing connectors, tubing setting and Vacuboy manual vacuum operator and tips. Hydrophobic filter for vacuum source protection. VACUSAFE is a compact laboratory aspiration system providing a safe and efficient way to collect and contain biological liquid waste. Vacuum systems are widely used for aspiration of liquids and their subsequent disposal. Protecting the vacuum source from contamination by liquids and aerosols with an overflow trap and a filter is not only good laboratory practice, but also imperative as a personal protection measure when working with biological, chemical or radioactive liquids.

LITHIUMSAFE SAFETY CABINETS Certifications: EN 14470-1 EN 16121 The line of LITHIUMSAFE safety cabin (more)ets consists of innovative high quality products, built in Italy and specifically built for the safe storage of lithium batteries. These cabinets are designed according to current standards and can be equipped with numerous accessories for further levels of safety. COSTRUCTION Completely built in electro-galvanized steel sheet, cold pressed with removable external structure; thicknesses of 1/1.5/2 millimeters and painting with anti-acid epoxy powders and passage in a thermal tunnel at 200°C. Particular insulation on the panels for high temperatures (800°C): calcium silicate and mineral fiber (fibroceramic free) at high density 300 Kg/m3 fixed with ceramic adhesives. Fireproof melamine laminate panels with high resistance to even aggressive vapours. Certification according to EN 14470-1 and EN 16121 standards. CHARACTERISTICS - AUTOMATIC CLOSING of the door in the event of temperatures exceeding 47°C - LOCK AND LOCK OF THE DOORS WITH KEY - Certified automatic closing SYSTEM (70/100 °C) of the air inlet and outlet ducts, maintenance-free, placed on the back of the cabinet. - Ejection HOLE diam. 100mm. at the back of the wardrobe - Anti-spark hinge in natural iron with brass pin. - 1 shelf perforated at the base - 3 cm thermo expanding GASKET. (DIN 4102) - 'Earth' CLAMP to prevent electrostatic charges. AUTOMATIC FIRE EXTINGUISHER The automatic fire extinguishing system works by detecting the presence of fire and controlling the discharge of extinguishing media so that the damage caused by the fire is minimized. The automatic extinguishing system includes a fire detection system, an extinguishing control unit and condensed aerosol generators. Information on the front panel display facilitates programming and simplified use. The possibility of programming the delayed activation of the sirens, or the time and duration of the extinguishing system make the unit very efficient and flexible. HOW DOES IT WORK? In the event of a lithium battery fire, the automatic fire extinguisher suppresses the fire and neutralizes the decomposition products of the electrolyte such as Hydrogen fluoride (HF), forming stable products such as KF and KHF2. The neutralizing action prevents the formation of highly flammable gases, such as hydrogen (H2), bringing the internal temperature down below the threshold necessary for a new fire to break out. Constituent parts of the fire fighting system: - LPCB certified according to EN 12094-1 and EN54.2 and 4 - Fire detection and automatic extinguishing - Graphic display 128 x 64 pixels - Fire extinguisher button on front of unit - Key switch for switching off mode selection: manual only or manual and automatic - 3 siren outputs - Power supply with 3A - Low absorption at rest: only 40mA - Inputs and outputs for remote function control - Extinguishment stop button and extinguishing cancel button - Storing of data events - RS-485 for remote connection In the image, the focus on the internal FBN fire extinguisher, in the double door model. Recommended accessories: - Charging points: 4x6 sockets. Contact us for more information.

MA X7.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Motic Panthera C2 Binocular Compound Microscope Your Personal Lab Solution If it is about stained se (more)ctions with cover glass protection, about native smears, fine needle biopsies, blood smears that wanted to be treated with or without cover glass: Panthera C2 with its selection of specified optics is your solution. The new Ultra Contrast (UC) objectives with additional glass elements to reach a 22mm Field of View, working perfectly together with neutral eyepieces (thanks to CCIS a fully corrected intermediate image for digital access is granted) guarantee the best performance in terms of color fidelity and contrast. Microscope hardware, illumination, handling: Simply convincing. Functionality is Always Related to the Sample Bright Field is the standard, Phase Contrast, Pol Contrast, objectives with/without cover glass correction, optional LED Fluorescence modules with variable filter combinations: Within Panthera C2 module kit everything is possible for your lab, for your application. The microscope hardware suits to almost any physics of the user, no need to talk about interpupillary distance, viewing angle, or seating position. New UC Optics for New Insights No doubt. The new Plan UC Achromatic objectives, from 2X to 100X magnification range, show significantly improved image contrast. For your individual application: The new 100X/0.8 "Dry objective" is especially favorable in environments where the time-consuming immersion procedure may be considered too complicated. Test it, you are easily convinced. A Field of View of 22mm indicates one more step closer to the High-End level of overview: Your horizon will be enlarged. Flexibility in Illumination The Panthera C2 offers flexibility in light sources. A 30W Halogen bulb can be replaced by a 3W LED of different color temperatures. A Full-Koehler setup for transmitted light is self-evident. Seamless Integration into your Workflow For maximum use of accessories, the Panthera C2 is deeply integrated into Motic's Upright microscope system. The universal turret condenser with all Phase rings and a Darkfield stop, the combination of Polarizer/Analyzer for birefringent samples, LED Fluorescence modules for Epi-Fluorescence: design your workplace according to your demands. We will help you. Click Here to View Product Video INCLUDED: The Motic Panthera C2 Binocular Compound Microscope includes: - Widefield UC-WF10x/20 Eye Piece - 4X/0.10 (WD 30.5mm) Objective - 10X/0.25 (WD 17.4mm) Objective - 40X/0.65/S (WD 0.6mm) Objective - 100X/1.25/S-Oil (WD 0.16mm) Objective - Dust Cover - Power Cord - Allen Key - Immersion Oil (5ml) - Blue Filter - Halogen Bulb - LED Module - 5 Year Manufacturer's Warranty