Grant-bio PHMP

This Labcaire Recirculating Class II Microbiological Safety Cabinet Model SC12R was remove (more)d from a university lab where it was surplus to requirements. The unit was last used 3 years ago and the lab are confident it was working when least used. The unit powers up and both the fan and white light work. There is no UV light fitted. It is in reasonably good cosmetic condition with some marks from use. The last inspection record recommends that the Pre-Filter is replaced Inside dimensions - D58 W120 H62cm

This Nuaire Labgard Class II Biological Safety Cabinet NU-437-400E  Series 6 was removed from a (more) university lab where it was surplus to requirements. The item powers on with blowers and both Light & UV working. The blower will only work when the sash is at the correct working height. This is marked on the side of the unit. When it is dropped fully the blower switches off as it should. When it is raised above the mark the windows alarm goes off as it should, until the sash is dropped back to the correct working height. The unit starts up as it should and shows 'low' airflow initially until it builds up to the correct flow. It then raises above the correct flow and the 'HI' alarm sounds. We spoke to a service engineer and they suggested that it will just require calibrating upon installation. It will need commissioning upon installation anyway. The lab reported that the filter has been removed. Inside dimensions - D57.5 W118 H72cm

This BIOAIR Safeflow 2 Class 2 Biological Safety Cabinet was removed from a university lab where it  (more)was surplus to requirements. The unit powers up, but an Unsafe message appears on the screen. "Incorrect laminar flow & CPU alive." There is a black line through the screen. It may just need a service to rectify the issue, but we cannot guarantee this. It is in good cosmetic condition with minor marks from use. Internal dimensions are: L114cm x W40cm x H66cm.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Dimensions (HxWxD): 1380 x 1280 x 790 mm Internal dimensions (HxWxD): 655 x 1190 x 600 mm Height bas (more)e: 800 mm Air volume recirculation: 887 m3/h Air volume exhaust (at 0,45 m/s): 363 m3/h Air volume total: 1250 m3/h Standard lighting: 2 x 36 W Light level up to 2500 Weight including base: 240 kg Including new filters

Pre filter: G3 (EN 779), 1760 x 445 mm Donflow filter: Astrocell HEPA 18P6+, 610 x 1830 x 69 mm, H14 (more) acc. EN 1822 Exhaust filter: Astrocell HEPA 7P6, 762 x 610 x 69 mm, H14 acc. EN 1822 Average downflow speed (work mode): 0.36 m/s Average downflow speed (standby mode): 0.10 – 0.20 m/s Average inflow speed in whole front aperture: >0.5 m/s Exhaust airflow 600 m³/h Lighting: TL-high output and UV-C Front aperture (work mode) (HxW): 165 x 1800 mm Front aperture maximum height: 350 mm Interior dimensions (HxWxD): 725 x 1800 x 605 mm Exterior dimensions (HxWxD): 1552 x 1943 x 844 mm Support frame height: 745 mm Weight: 315 kg

The MULTI-TX5 Digital is the exclusive solution for all multi-tube stirring applications, even the m (more)ost complex ones. The instrument has various foam holders for different vortex tubes; this makes it extremely useful for emulsifying, disintegrating, mixing or homogenizing samples. Major applications include suspensions, genotyping, DNA and RNA testing. Thanks to the powerful brushless motor, MULTI-TX5 Digital is able to stir solutions from 100 up to 2500 rpm, for microbiology and R&D or quality control applications in various sectors such as pharmaceuticals, cosmetics, food & beverage and chemist. Ergonomics and simplified operation Switching between applications using different foam racks is quick and easy: - Loosen both screw knobs on the closure plate and lift up the plate. - Remove the plate or simply tighten it higher. - Place the rack with the tubes inside the foam holder, lower or insert the closure plate until you reach the tubes and tighten the knobs. - Done! Safety and ease of use The MULTI-TX5 Digital guarantees a high level of safety and protection as it is made of stainless steel. The digital control panel is designed to offer a superior level of ergonomics and high ease of use and with the comfortable knobs and the double ultra-bright digital display, setting and monitoring the stirring time and stirring speed is very simple. The structure is carefully designed to ensure maximum comfort, the best resistance and minimum space on the laboratory bench. Moreover? Press the center button for 3 seconds and activate the Safety Lock of the instrument to prevent inadvertent changes. Cutting-edge functionality Unique features ensure operational automation and optimize unattended operation. Very easy to use thanks to the intelligent interface of the new control panel: - Integrated timer - 1 min to 99 h 59 min (1 min steps) - Pulse mode that allows the instrument to shake the samples at maximum speed for 2 seconds and stop for 1 second, repeating the operation - Continuous working mode with time count shown on the display - Automatic rotation inversion that ensures better mixing capacity - from 5 s to 99 min 59 s (1 s steps) - Programs in intermittent mode for better scheduling of unattended operations - from 5 s to 99 min 59 s (1 s steps)

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. Included are; ITEM-06051 Glass Fiber FiltersITEM-06367 2 Boxes PP Deepwell PlatesITEM-06378 Box of Bio-Rad Rehydration TraysITEM-11176 2x Laboratory Glass Beakers Lab EquipmentITEM-11177 Corning 250 mL Polycarbonate Erlenmeyer Flask with Vent CapITEM-11929 Lot of Small Glass Sample BottlesITEM-15584 Desiccator & Spare LidITEM-37221 Thermo Scientific 8179 Rotor & BucketsITEM-37233 12 x Kendro Sorvall Tube bottle AdaptorsITEM-37234 Mix of Small GlasswareITEM-37235 Box of Hybaid Glass TubesITEM-37236 Box of Gilson consumablesITEM-37256 UVP Mineralight lampITEM-37257 3uv TransilluminatorITEM-37258 Sunavo Single burnerITEM-45225 Box of Generic white small packaging boxesITEM-45229 2x Tripp-lite IsobarITEM-45232 Mitsibishi P95 PrinterITEM-45246 Various carouselsITEM-45247 APC Back Ups ES 700ITEM-45250 tubesITEM-45253 2x LightboxesITEM-45386 ITESanyo ABC-VW24A Air PurifierITEM-45399 F-300 Impulse heat sealerITEM-45400 DarkReader TransilluminatorITEM-45401 MX-T6-S Roller MixerITEM-45402 Fisons WhirliMixerITEM-45563 Heidolph MR 3001 KITEM-45565 Fisher Scientific DP2000ITEM-45566 Capex 2DCITEM-45567 iBlot InvitrogenITEM-45568 Eppendorf Centrifuge 5415 DITEM-45569 AnalyTikjena UVP Visi-Blue TransilluminatorITEM-45570 Kodak Coldlight Illuminator Series 2ITEM-45572 Heraeus Biofuge FrescoITEM-45573 IKA KS501 Digital

Modify six standard preset and 10 user-defined (20 steps each) freezing profiles for custom protocol (more)s to meet application needs with Thermo Scientific CryoMed Controlled-Rate Freezers: complete, one-piece freezing systems. Assembling and connecting electrical components has been eliminated with an integrated control panel and thermal printer.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

Euromex MicroBlue MB.1051-LCD digital microscope with 5.6 inch fixed LED display. Achromatic objecti (more)ves 4/10 / S40x DIN 35 mm, mechanical stage and LED lighting. The modern MicroBlue are high-quality entry-level microscopes, especially suitable for beginners or education, capable of withstanding intensive use and manipulation by non-expert users. 5.6 inch LCD screen with 640 x 480 pixels with built-in SD card for saving of images in jpeg format. Video resolution of 640 x 480 pixels, saving in AVI format. Nosepiece for 4 objectives. Ball-bearing mechanism and click-stops Achromatic 4x N.A. 0.10, 10x N.A. 0.25 and S40x N.A. 0.65 DIN 35 mm parfocal objectives. The S40x objective is spring-mounted. Square stage 115 x 100 mm with 55 x 22 mm X-Y translation stage. Coaxial coarse and fine adjustments with 200 graduations. Precision 15 μm, 3 mm per rotation. Total travel approximately 15 mm. Friction adjustment. Friction of focus control can be adjusted. N.A. 1.25 condenser with iris diaphragm and filter holder. 1 W LED illumination with intensity control, rechargeable batteries with external power supply/charger. Supplied with USB-2 cable, manual and dust cover in styrofoam case.