Huber Ministat 240 CC3 Umwälzthermostat Refrigerated Circulator -40...200°C 4,5L

LAUDA ECO Heating thermostat LAUDA ECO stands out for its range of features and ease of use. ECO the (more)rmostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that the regulation of the flow between inside and outside is also possible during operation. - The circulation pump can be adjusted on six levels - The ECO heating thermostats line includes transparent baths up to 100°C and stainless steel baths up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230 V; 50 Hz are also available with natural refrigerants - Temperature graphs on display - Convenient operation with softkey cursor - Mini USB interface LAUDA thermostats with tub are equipped with a cooling coil as standard. A drain cock on the rear makes changing the heat transfer fluid easy and safe. Heating performance graph of Gold immersion thermostats with stainless steel tank. Performance graph of the pressure pump on the six levels.

LAUDA Proline immersion thermostat The LAUDA Proline bridge thermostats with vario flex pump are exc (more)ellent for thermostating in any tank. The PB models have a pressure / suction pump and are used in tanks of 200 mm. While the PBDs are equipped with pumps with more powerful pressure and used in tanks of 320 mm deep. Also available are a telescopic rod for tubs with a width of 310 to 550 mm, an ergonomic handle and attachments for side pumps. The LAUDA Proline bridge thermostats are available with two different control panels. The Master version (PB, PBD) is designed for all applications where the parameters are not changed very often. Models with the removable Command operating unit (PB C; PBD C) offer a graphic LCD screen for high ease of use and optimum functionality. The 'D' versions, 'PBD' and 'PBD C' models, are equipped with a max 1.1 bar pressure pump only, with a max. (pressure) of 32 L/min. The 'PB' and 'PB C' models are equipped with pressure and suction pumps, mac 0.7 bar and 0.4 bar respectively, with a max. (pressure) of 25 L/min. Notable features - PowerAdapt system for optimal adaptation of the max. Heat output. without interfering with the mains power supply - Low level protection and adjustable overtemperature protection with audible alarm. Levels measured with float Accessories included Fittings for pump connection, telescopic rod Specific characteristics of the Proline PBD C model - For tanks of 320 mm deep - State-of-the-art Command control panel, removable, for remote use; LCD display with the most advanced feature set in the LAUDA range - Pump pressure mx. 1.1 bar - Tank volume max. 80 L - Water-cooled temperature range from 20°C to 300°C - Operating temperature range from -30°C to 300°C - Pump connectors M16 x 1 - Fitting 13 Ø

Heating thermostat from 20 to 200°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Heating performance graph of ECO Silver immersion thermostats with stainless steel tank. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Cooling coil connections 2 - Pump connection: outflow and return (as standard only with E 4 S and ET 15 S) 3 - Four feet 1 - Mains connecting lead 2 - Rating label 3 - Bath draining tap 4 - Bath drain point

Calibration and regulation of temperatures from -25 to 200°C with LAUDA calibration thermostats The  (more)ECO calibration thermostat is designed for the specific needs of laboratories that carry out calibration and regulation work on a daily basis. The equipment was specially developed for the precise calibration of thermometers, such as industrial platinum resistance thermometers, temperature probes, thermocouples or electrical thermometers. Liquid calibration baths are considered the most stable temperature source and offer the greatest consistency for comparative calibration of temperature probes and sensors in a laboratory. LAUDA calibration thermostats are specially equipped for the calibration of glass thermometers or electric thermometers; they are an ideal solution compared to heat cabinets and metal block thermostats, as these thermostats transfer heat into the thermoregulation liquid 40 to 60 times better than through the air. The LAUDA ECO REJ 1225 G calibration thermostat is ideal for calibrating glass thermometers or electric thermometers. DISPLAY AND CONTROL The thermostat can be easily and flexibly integrated into your existing work processes thanks to a variety of interfaces, including Profibus, Ethernet or Pt100/LiBus. The large color TFT display offers a clear overview at a glance and allows you to program a variety of temperature curves, which are automatically processed by the thermostat to support your daily laboratory work. - Color TFT display for simultaneous indication of actual and set values ​​and temperature profile graph - Intuitive menu navigation in simple language - Simple entry via cursor and function keys. Additional Tmax button for overtemperature protection - Fully electronic stepless controller with PID action - USB interface as standard - Upgradeable with Pt 100/LiBus module for external control and remote control via command console - Programmer with 150 temperature/time segments separable into 5 programs CONSTRUCTION AND BATH - Thermostatic calibration bath with the latest microprocessor technology and integrated cooling system - Safety class III for operation with flammable and non-flammable liquids. - Too high temperature protection adjustable via menu - Pump with six adjustable power levels - Easy flow control between internal and external circulation - 2 separate chamber design for a constant level in the thermostating chamber - Vertical adjustment for calibration chamber overflow - Stainless steel bath with drain valve Why LAUDA thermostats? Calibration applications require thermostats that maintain a constant, temperature-independent liquid level. To achieve this, LAUDA uses a two-chamber tank, the temperature chamber and the operation chamber, also known as the usable space or buffer chamber. A unit pumps fluid from the heat chamber to the application chamber where, if it is overfilled, it has the potential to overflow back into the heat chamber. The cylindrical working chamber is height adjustable, which makes it possible to adjust the immersion height. The thermometers, completely immersed, can therefore be read directly at the point of immersion. Furthermore, the separate calibration chamber ensures constant immersion depth, regardless of liquid volume expansion, excellent temperature stability of ±0.02 K and homogeneous temperature distribution. Standard accessories - 2 screw caps, 2 closing caps - 1 bath cover Performance graph of the pressure pump on the six levels. GREEN TECHNOLOGY The LAUDA ECO calibration thermostat uses refrigerants compliant with the European regulation on fluorinated gases. Furthermore, the REJ 1225 G is optionally available with natural refrigerants.

Refrigeration thermostat KT 18-42 FRYKA Main features: - Electronic temperature control with LED dis (more)play - Interchangeable circulation pump - Refrigeration unit: silent, fully hermetic, sealed, air cooled, low maintenance - Stainless steel tank - Easy to clean: Interior without frames, rounded corners - No electronic controls exposed to vapors - Ram protection ring - Four mounting clamps (M8 threads) at the corners of the tub for attaching support rods - Bathtubs in 18/10 stainless steel

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Eppendorf Vacufuge Plus Vacuum Concentrator Complete System with Built-in Diaphragm Pump The Eppendo (more)rf Vacufuge Plus Vacuum Concentrator Complete System with Built-in Diaphragm Pump (catalog number 022820168) was designed with the customer in mind to deliver an ergonomic, intuitive and durable solution that fits comfortably right on the lab bench. The advanced heating technology provides best treatment for your sample which assures quick, efficient and gentle vacuum concentration of DNA/RNA, nucleotides, proteins and other liquid or wet samples. Our new coated lid provides superior chemical resistance against aggressive acids and organic solvents . INCLUDED: The Eppendorf Vacufuge Plus Vacuum Concentrator Complete System with Built-in Diaphragm Pump includes: - Power Cord - Operator's Guide - Full 6 Month Parts and Labor Warranty Eppendorf Vacufuge Plus Vacuum Concentrator Complete System with Built-in Diaphragm Pump SpecificationsVacuum20 hPa (20 mbar)Sample Capacitymax. 144 vessels/2 microplatesFixed Speed1,400 rpmTube Volume0.2-50mlVolume Range72mlPower Supply120 V, 50-60HzMax. Power Consumption350WDimensions (W x D x H)33 x 58 x 29cmWeight w/o accessories31.5kg

Detection method: DELFIA

Do you need a moisture analyzer that not only determines moisture or dry matter content with impress (more)ive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of moisture analyzers: It Dries in 4 Ways The MA 5Y Moisture Analyzer offers you four drying profiles: standard, mild, fast and step. The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content. The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather. You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent. The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally. What Drying Temperature Should I Set? The drying temperature determines the duration of the process. Its value depends on the type of material. If the temperature is too low, it will under-dry the sample and, consequently, unnecessarily increase the measurement time, while if it is too high, it will cause a burning effect on the material. The drying temperature for the traditional (oven) method is determined by industry or factory standards. If there are no standards, you will select the temperature experimentally. The maximum drying temperature on the MA 5Y Moisture Analyzer is 160°C. How Do I Finish the Drying? In 4 Ways The MA 5Y Moisture Analyzer has four finish modes: automatic, manual, time-defined and user-defined. Automatic mode You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. Manual mode You terminate the measurement yourself by pressing the STOP button. Time-defined mode The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! User-defined mode When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure. Digital Weighing Auditor Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the moisture analyzer will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the moisture analyzer on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the moisture analyzer which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. Full data security Electronic signatures Validations Electronic records Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13.56 MHz