Eppendorf ThermoStat plus Heating Block

Heating thermostat from 20 to 100°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - Transparent polycarbonate bath up to 100°C - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Graph of heating performance of ECO Silver immersion thermostats with polycarbonate bath. Performance graph of the pump pressing on the six levels.

LAUDA Proline immersion thermostat The LAUDA Proline bridge thermostats with vario flex pump are exc (more)ellent for thermostating in any tank. The PB models have a pressure / suction pump and are used in tanks of 200 mm. While the PBDs are equipped with pumps with more powerful pressure and used in tanks of 320 mm deep. Also available are a telescopic rod for tubs with a width of 310 to 550 mm, an ergonomic handle and attachments for side pumps. The LAUDA Proline bridge thermostats are available with two different control panels. The Master version (PB, PBD) is designed for all applications where the parameters are not changed very often. Models with the removable Command operating unit (PB C; PBD C) offer a graphic LCD screen for high ease of use and optimum functionality. The 'D' versions, 'PBD' and 'PBD C' models, are equipped with a max 1.1 bar pressure pump only, with a max. (pressure) of 32 L/min. The 'PB' and 'PB C' models are equipped with pressure and suction pumps, mac 0.7 bar and 0.4 bar respectively, with a max. (pressure) of 25 L/min. Notable features - PowerAdapt system for optimal adaptation of the max. Heat output. without interfering with the mains power supply - Low level protection and adjustable overtemperature protection with audible alarm. Levels measured with float Accessories included Fittings for pump connection, telescopic rod Specific characteristics of the Proline PB model - For tanks of 200 mm deep - Master control panel; calibration point, timer, under / over temperature alarms, digital indicators - Tank volume max. 80 L - Water-cooled temperature range from 20°C to 300°C - Operating temperature range from -30°C to 300°C - Pump connectors M16 x 1 - Fitting 13 Ø

Heating thermostat from 30°C to 250°C for professional thermostats LAUDA PRO is a cutting-edge produ (more)ct line, designed to be the laboratory tools of the future. A significant innovation was the division between thermostats dedicated to internal applications and those dedicated to external applications. Then, the choice of offering products with tanks of a few liters allows the operator to quickly reach the desired temperature. New criteria have also been adopted for the design of the control panels. Two operational approaches are available, Basic, with OLED screen and essential but professional features, and Command Touch (named 'C'), the ultimate in the LAUDA experience, with touch display, graphic displays and numerous functions. In either case, the control panel can be removed from the thermostat for maximum operational flexibility and a noticeable decrease in instrument height. All thermostats are equipped with an Ethernet, USB interface and a Pt100 connection as standard. Cooling thermostats are also available with natural refrigerants. In addition, as standard, they are equipped with a cooling system that allows a lowering of the thermostat temperature with water. Notable features - Removable control panel for remote control - Stainless steel bathtubs (insulated with handles and drain tap) - 8-stage LAUDA Vario internal pump - Ethernet interface, USB and Pt100 connection as standard - Drain cock on the front of the device Accessories included Tank covers, pipe fittings with screw caps for the cooling coil Graph of heating performance of PRO P LAUDA thermostats.

Heating thermostat from 20 to 200°C, with TFT color display and complete programming functions LAUDA (more) ECO stands out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - The circulation pump can be adjusted to six levels - Programmer with 150 temperature/time segments separable into 5 programs - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Temperature graphs on display - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Heating performance graph of Gold immersion thermostats with stainless steel tank. Performance graph of the pump pressing on the six levels.

Heating immersion heater / Thermostat IKA ET B Basic Yellow Line 5L/min 250°C 1500W

Proline heating thermostat with tank Proline clear-view LAUDA thermostats have been designed for dir (more)ect observation of objects. They are ideal for use with LAUDA Scientific PVS or iVisc automatic viscometer, as the necessary temperature stability for precise viscosity determination is ensured over the entire temperature range. In addition, the two-chamber principle always guarantees a constant liquid level in the measuring chamber, regardless of the volume and temperature of the medium. PVL models with five layers of insulating glass are suitable for low temperature measurements down to -40° or -60°C when a low temperature chiller or thermostat is connected. These thermostats are available with two different control units. The Master version is designed for all applications where the parameters are not changed very often. The removable Command operating unit (PV C models) incorporates a graphic LCD screen for high operating convenience and a programmer. Notable features - LAUDA Vario Flex pump (pressure pump) with eight selectable power levels - Cooling coil fitted as standard with connection for additional cooler Accessories included Fittings for pump connection, cooling coil Specific features of the Proline PV 36 C model - Tank volume min. 28 L - Tank volume max. 36 L - Tank opening 585 x 135 mm - Bowl depth 320 mm - Usable depth 285 mm - Upper height of the tank 390 mm - State-of-the-art Command control panel, removable, for remote use; LCD display with the most advanced feature set in the LAUDA range - Pump pressure mx. 1.1 bar - Water-cooled temperature range from 20°C to 230°C - Operating temperature range from -30°C to 230°C - Pump connectors M16 x 1 - Fitting 13 Ø

Food scale Valor 2000 Ohaus The OHAUS Valor 2000 waterproof food scale is a unique tool of its kind, (more) thanks to a winning combination: speed and duration. Available in both stainless steel and ABS plastic armor, Valor 2000 features two large LED displays, one front and one rear, food safety and puncture-resistant keyboards, elements that help make it a perfect tool for dry or humid environments.Cut-resistant keyboard prevents damage caused by sharp objects - Flow-Thru waterproof design, IP68, for weighing liquids and more in the wettest environments - Speed ​​and double display: several operators can work at the same time - The Valor 2000's unique IPX8 Flow-Thru design, NSF certified, allows the balance to drain moisture when used in humid environmental conditions. - The sturdy polycarbonate keyboard provides valuable protection from knives and other sharp tools used in food preparation, processing and portioning applications. - The stabilization time is less than half a second. Large front and rear LED displays allow for easy weight viewing, allowing two operators to share a single scale. Applications Weighing, weight control Display Double LED display Operation AC adapter (included) or rechargeable battery (included) Communication N/A Structure Stainless steel armor and platform (ABS models with stainless steel platform), front level indicator Construction features Self-closing power socket cover, carrying handle

CS 60 A+B (ACID+BASIC) BASIC PVC - CHEMISAFE CABINET - Completely made with a thickness of 18 mm in  (more)HD PVC - Extractor cover and plinth completely made of cold pressed steel sheet 1.0 mm thick, with epoxy coating with acid-resistant epoxy powders electrostatically applied at a temperature of 200°C, which guarantees a layer thickness greater than 90 microns on the entire surface of the cabinet - Monocoque structure built on a 15/10 mm base with adjustable leveling feet - Division into 2 compartments to store the different families of non-flammable chemicals separately - Simple hinged swing doors - Key lock - Door opening at an angle of 110° which allows the shelves to be extracted without tilting them - Corrosion-resistant plastic outer zipper - Compartments equipped with containment shelves made of PVC adjustable in height - Connection collar Ø 125 mm - Available with or without suction unit - Modular solutions - Tray shelves - Standardized pictograms according to ISO 3864 standards - Complies with EN 61010-1 standard Supplied: 2+2 PVC shelves (max load 40 Kg evenly distributed). Optional: - Shelves - Timer - Door open alarm - Ventilation

Labconco 2000ml Complete Fast-Freeze FlaskCompleteFlask consists of 7543200 Flask Bottom, 7544400 Fl (more)ask Top and a supply offilter paper.Fast-FreezeFlasks attach with adapters to valve ports on Labconco Drying Chambers andManifolds. They are available in clear or amber-colored glass. A completeFast-Freeze Flask consists of a rubber top, glass bottom and a supply of filterpaper.Tops, bottomsand filter paper are available separately as replacement components. Adaptersare available in borosilicate glass or stainless steel. Fast-Freeze Flasks andAdapters are compatible with any brand freeze dryer that has 1/2" or3/4" diameter valve ports.Glass flaskswithstand maximum temperature of 490º C. Flask toppers withstand a maximumtemperature of 450º C.INCLUDED: The Labconco 7541200 2000ml Complete Fast-Freeze Flask includes: - Flask Bottom & Top - Supply of Filter Paper - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA R 1001 Paddle stirrer Maximum Speed 2,000 RPM Flow Type Tangential Flow Material Stainless Steel (more) Features - Compact 34 mm stirrer diameter, perfect for precise applications - High-quality AISI 316L / 1.4571 stainless steel construction for durability and resistance - Operates within a wide ambient temperature range of 5 - 40 °C for diverse environments - Robust stainless steel build guarantees long-lasting performance - Achieves maximum speeds of up to 2,000 RPM for rapid mixing tasks This high-precision stirrer, with a compact diameter of 34 mm and a 160 mm shaft, is engineered for the meticulous mixing of small volumes. Crafted from durable AISI 316L / 1.4571 stainless steel, it combines lightweight design with robust performance, weighing only 0.018 kg. Its tangential flow mechanism and capability to operate at speeds up to 2,000 RPM ensure efficient and thorough mixing. Suitable for a wide ambient temperature range from 5 to 40 °C, this stirrer is the perfect tool for diverse laboratory applications.INCLUDED: The IKA R 1001 Paddle stirrer includes: - IKA R 1001 Paddle stirrer - Manufacturer's Documentation IKA R 1001 Paddle stirrer SpecificationsStirrer diameter34 mmShaft diameter4 mmShaft length160 mmMaterial in contact with mediumAISI 316L / 1.4571Weight0.018 kgPermissible ambient temperature5 - 40 °C

Hermle 750ml Blood Bag Buckets for Z496-496-1000-AC 2/pk TheHermle 750ml Blood Bag Buckets for Z496- (more)496-1000-AC 2/pk are designed for use with Hermle Z496-1000 and Z496-100-AC swing out rotors. These buckets are sold in sets of 2 and can hold one 750ml blood bag per bucket. They have a maximum speed of 4,600 RPM and can handle a maximum relative centrifugal force (RCF) of 5,274 x g. The buckets have a maximum radius of 22.3 cm when in use with a compatible rotor, which allows them to accommodate larger blood bags. They are ideal for processing blood samples in research, clinical, and industrial laboratories. The compatibility of these buckets with Hermle Z496-1000 and Z496-100-AC centrifuges ensures that they are a reliable and efficient solution for blood processing applications. INCLUDED: The Hermle 750ml Blood Bag Buckets for Z496-496-1000-AC 2/pk includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty