Sykam Chromatography LaserChrom With UV/Vis Detector Lab

AZURA preparative HPLC pump P 2.1L covers wide flow rate range and pressure capabilities. It has bee (more)n designed for purification of mg and gram samples. The Mobile Control allows intuitive control in stand-alone operation. The integrated automatic recognition of the pump head with RFID technology allows fast adaptions of the pump for various applications. Preparative pump offers wide range of flow rates (0.1-1000 ml/min) Choice of different LC software platforms Improved electronic drive compensation Integrated compressibility compensation Integrated leak management Constant pressure operation mode Solvent delivery Pump type: Preparative HPLC pump Delivery system: double piston pump with Al²O³ pistons Pump head: 250 ml/min Pump head materials: titanium Pressure sensor materials: PEEK (Polyether ether ketone) Maximum delivery pressure: 22.5 MPa (225 bar, 3260 psi) up to 100 ml/min, 20 MPa (200 bar, 2900 psi) at 250 ml/min Flow rate range: 0.1-250 ml/min, 0.5-200 ml/min (recommended) Flow rate increment: 0.01 ml/min Flow rate accuracy: ± 2 %, measured at 5 – 50 % of flow range using ethanol/water 10:90 Flow rate precision: < 0.2 % RSD Gradient support: isocratic, upgradeable to a binary HPG system with additionalpump P 2.1L or to a binary orternary LPG system HPG: gradient accuracy: ± 2 % (5 – 95 %, measured at 5 – 50 % of flow range, water/caffeine tracer) HPG: gradient precision: 1 % RSD, based on retention time at constant room temperature LPG: gradient accuracy:  ± 3 % (5 – 95 %, measured at 5 – 50 % of the flow range, water/caffeine tracer) LPG: gradient precision: 2 % RSD, based on retention time at constant room System protection: soft start, Pmin and Pmax are programmable Wetted materials: titanium,stainless steel, graphite fiber reinforced PTFE, FKM, PEEK, sapphire, aluminum oxide (Al²O³) Ambient conditions: temperature range: 10–40 °C; 50–104 °F, air humidity: below 90 % humidity (non condensing) Leak sensor: Yes Communication Control: LAN; RS-232; analog and event controlled Analog inputs: 0-10 V Analog control input: flow rate Level/event outputs: 8 event outputs (TTL, OC, relays) Programming: 19 programs + 9 links (to programs) + 1 wake up program Special features: system pump head is detected automatically using radio frequency identification (RFID) General Power supply: voltage range: 100 – 240 V, 50 – 60 Hz Dimensions: 361 x 208.2 x 523 mm (W x H x D) Weight: 19 kg

This Hewlett Packard / Agilent 1100 Series HPLC G1313A Autosampler was removed from a university lab (more) where it was surplus to requirements. The item is in good cosmetic condition and powered up. When powered up, the item ran a start-up self-test that displayed the motor in good working order, we are unable to test this item further at our facility.

Gilson HPLC System &amp; Accessories - 306 - 811B - 805 - 832 - 7955- 119 - 506C This was removed fr (more)om a university lab where it was surplus to requirements. This is a large system. Most of the units have been powered up but it has not been tested further. We anticipate it may take some level or refurbishment to get it back to full working order. Included are; 1x Gilson XL Sampling injector:Model 231 The unit powers on and is in good cosmetic condition 2x Gilson Piston Pumps:Model 306 The units both power on and are in good cosmetic condition. 1x 15 pin MALE to FEMALE Ribbon cable:The unit is in good cosmetic condition. 1x Gilson Manometric Module:Model 805 The unit is in good cosmetic condition.There was no power port on the unit, it must be powered by a controller cable connected via a 306 Pump. 1x Gilson Dynamic Mixer:Model 811B The unit powers on and is in good cosmetic condition. 1x Gilson Temperature Regulator:Model 832 • Version 1.01The unit powers on and is in good cosmetic condition. 1x Gilson Collum Chiller:Model 7955 The unit powers on and is in reasonable cosmetic condition. 1x Gilson UV/VIS Detector:Model 119 •Version 2.01 The unit powers on and is in good cosmetic condition. 1x Gilson 506C System Interface unit:The unit is in good cosmetic condition. No sign of power. 1x 25 pin MALE to FEMALE serial cable for the (Gilson 506C System Interface unit)The unit is in good cosmetic condition. 1x 25pin Male to 9pin FEMALE connector adaptor.The unit is in good cosmetic condition. 1x Gilson Dilutor:Model 401&nbsp;The unit powers on and is in good cosmetic condition. 1x Decade Electrochemical Amperometric Detector: ANTEC LeydenVersion 3.02The unit powers on and is in good cosmetic condition. 1x Viglen Contender PC:Model C3000A *OSWindows 98 •SoftwareUniPoint LC Version 3.01 The unit powers on. Accessories: 1x Viglen MonitorModel TS700 The unit powers on and is in good cosmetic condition. 1x Viglen KeyboardModel KB-0325 •PS/2 connector The unit is in good working and cosmetic condition&nbsp; 1x Microsoft Mouse:FCC ID: c3kkmp1 •PS/2 connector 1x VGA Cable:The unit is in good working and cosmetic condition. CD:1x Gilson UNIPOINT for Windows 98Version 3.0 Floppy Disk:Gilson System Software: •Version 1.71 •Disks 1 - 4Ser no. 219H8B765The units are in good cosmetic condition. •Win32s Disks 1-2The units are in good cosmetic condition. 2x Gilson 10WSC heads (cases)Ref E50056 • 3x Gilson WSC Pistion Pump Head user guides are inside the cases. 1x Gilson Thermostatic Rack Unit:Ser no. 270J1G048 The unit&nbsp;powers on via the (Gilson 832 temperature regulator)the unit is in good cosmetic condition. Gilson Racks for the thermostatic unit. 1x Rack Well, 60x 2ml glass or plastic vials.Part no 30 1x Rack Well, 108 x 0.7ml glass or plastic vials.Part no 31 The units are in good cosmetic condition. 1x Gilson Serial Input/Output Channel: 5 sets of( 2x FEMALE to 1x MALE 9pin connectors) Manuals:1x Unipoint system software: (Folder)The manual is in good condition and appears to be complete. 1x Gilson 506C System Interface User Guide:The manual is in good condition and appears to be complete. 1x Gilson 401 Dilutor Instruction manual:The manual is in good condition and appears to be complete. 2x Gilson 231-401 Auto Sampling Injector Instruction manual:The manuals are in good condition and appear to be complete. 1x Gilson 119 uv/VIS Detector User Guide:The manual is in good condition and appears to be complete. 1x 802C. 803C, 804C Manometric Module Instruction manual:The manual is in good condition and appears to be complete. 2x Gilson 306 Piston Pump User Guide:The manuals are in good condition and appear to be complete. 3x Gilson WSC Pistion Pump Head User Guides:The manuals are in good condition and appear to be complete. 1x Gilson UNIPOINT for Windows 98 User Guide:The manual is in good condition and appears to be complete. 2x 1x Decade Electrochemical Amperometric Detector Manuals:The manuals are in good condition and appear to be complete. 1x Gilson 832 Temperature Regulator User Guide:The manual is in good condition and appears to be complete. 1x Gilson 811B Dynamic Mixer User Guide:The manual is in good condition and appears to be complete. 1x Gilson 805-806-807 Manometric Modules User Guide:The manual is in good condition and appears to be complete. 1x Gilson SC- type Piston pump head Instruction manual:The manual is in good condition and appears to be complete. 1x Gilson 506C System Interface User Guide:The manual is in good condition and appears to be complete. 1x Gilson 506 Contact/ Modem Operators Guide:The manual is in good condition and appears to be complete. Syringes: 2x Phenomenex HPLC Columns:Model SYNERGI 4U Hydro- RP 80A 1x •Size 250x4.60mm1x •Size 250x3.00mm The units are in good cosmetic condition. 1x Phenomenex HPLC Column:Model SYNERGI 4U Polar - RP 80A •Size 250x4.60mm The unit is in good cosmetic condition. 1x Phenomenex HPLC Columns:Model HyperClone 5u ODS (C18) 120A •Size 250x4.60mm The unit is in good cosmetic condition. 1x Phenomenex HPLC Columns:Model HyperClone 5u SILICA 120A •Size 250x4.60mm The unit is in good cosmetic condition. 1x Phenomenex HPLC Columns:Model Phenosphere - NEXT 5u C18 •Size 250x4.60mm The unit is in good cosmetic condition. 2x HYPERSIL&nbsp;(5u ODS)&nbsp;Syringes:Prod no. 30105-062 •Size 150x4.60mm The units are in good cosmetic condition. 1x HYPERSIL&nbsp;(5u HyPURITY) Syringe:Prod no. 21005-022 •Size 150x4.60mm The unit is in good cosmetic condition. 2x HYPERSIL (ELITE C18 5u) Syringes:Prod no. 30105-062 •Size 150x4.60mm The units are in good cosmetic condition. 2x Phenomenex SYNERGI 4u Hydro -RP 80A Syringes:Part no. 00G-4375-E0 •Size 250x4.60mm The units are in good cosmetic condition. 1x Phenomenex HYPERSIL 3u C18 (ODS) Syringe: •Size 100x2.00mm The unit is in good cosmetic condition. 1x Phenomenex HYPERSIL 4u MAX -R P 80A Syringe: •Size 150x4.60mm The unit is in good cosmetic condition. 1x Phenomenex LUNA 3u c18(2) 100A Syringe: •Size 100x2.00mm The unit is in good cosmetic condition. 2x HYPERSIL 3 C18 Syringes: •Size 100x4.60mm The units are in good cosmetic condition. 1x Phenomenex BIOSep- SEC-S 200 Syringe: •Size 300x7.80mm The unit is in good cosmetic condition. 1x Phenomenex JUPITER 5u C18 300A Syringe: •Size 150x4.60mm The unit is in good cosmetic condition. 1x Hamilton Microliter Syringe:Model no. 1802RSNE •25uL The unit is in good cosmetic condition. 1x Hamilton Microliter Syringe:Model no. 1801RSNE •10uL The unit is in good cosmetic condition. 1x Hamilton Microliter Syringe:Model no. 801RNE WAT •10uL The unit is in good cosmetic condition.

Dionex HPLC System ED40,GP40,LC20,RFC-30 Lab This system was removed from a university lab where it  (more)was surplus to requirement. All units are in good cosmetic condition and power on, we are unable to test them further at our facility. This system includes a PC with the following software installed:Chromeleon 6.8 SR10 Build 2818 The password for the PC is available on request. All units included in the system: Dionex LC20 Chromatography EnclosureModel: LC20-1Serial#: 97100538 Dionex ED40 Electrochemical DetectorModel: ED40-1Serial#: 99020647 DIONEX GP40 Gradient PumpModel: GP40-1Serial#: 97100508 Dionex ICS-1100 Ion Chromatography SystemModel: ICS-1100Serial#: 11080551 Dionex DS6 Heated Conductivity CellSerial#: 11080624 Dionex Reagent-Free ControllerModel: RFC-30Serial#: 11080700 Dionex ASRS 300Model: ASRS 300 4mmSerial#: 110812018 All additional parts included: 4 x Dionex Waste Bottles2 x Dionex Bottle Carrier1 x Dionex Chromeleon 7 License Key - Serial#: 1509811 x Dionex CM Dongle - Serial#: 641881 x Dionex IonPac CS12A 4x250mm Analytical - Serial#: 028007

This Waters UPLC System with Flex Cart was removed from a university where it was surplus to require (more)ment. All units power up and are in good cosmetic condition, we are unable to conduct further testing at our facility. The system was last serviced in April 2019 by an Agilent CrossLab engineer. Included are; 1 x Walters Sample Manager with block heaterAppliance No. J0112Serial No. F05UPS 887N 1 x Waters Binary Solvent ManagerAppliance No. J0113Serial No. F05UPB 972M 1 x Walters Sample Tray 3 x data cables for computer connection3 X power leads1 x well tray with 96 compartments

New generation of Ohaus portable scales These balances are ideal for laboratory and industrial appli (more)cations. They feature an easy to navigate color touchscreen display and a compact design that allows for storage. They offer excellent performance with fast stabilization times and high resolution results. They also feature excellent overload protection and advanced connection options. - Fast and efficient navigation thanks to the color touchscreen display - High weighing speed and high resolution display of repeatable and reliable results - Excellent overload protection - Different application modes and operation in various languages ​​for simplified weighing The OHAUS Scout scale can be equipped with various connectivity options: RS232, USB, USB device, Ethernet or Bluetooth®. These options guarantee a modern and smart experience, increase the versatility of data collection and transfer functions. Other standard features and equipment Transport lock, stainless steel weighing pan, menu and setting lock switch, adjustable and non-slip feet, bubble level, software and mechanical overload/underload protection, stability indicator, automatic tare, level indicator low battery, auto power off, user selectable print options and communication settings. Applications Weighing: Determines the weight of the items on the pan in the selected unit of measure. Piece Counting: Count the number of pieces on the pan using a uniform weight. Percent Weighing: Measures the weight of a sample displayed as a percentage of a pre-set reference weight. Check Weighing: Compares the weight of a sample against target limits. Dynamic Weighing: Weigh an unstable sample load. The balance takes an average of weights over a period of time. Totalization: Measures the cumulative weight of multiple items. Cumulative total may exceed balance capacity. Density Determination: Determines the density of solids or liquids. With the integrated weigh below hook, specific gravity tests can be performed for items that cannot easily be placed on the weighing pan. Display Hold: Manually holds the last stable weight or the first highest stable weight value on the display. Mole Weighing: Measures the weight of a sample and automatically calculates it into the mole. MODELS AVAILABLE: Applications Weighing, Parts Counting, Percent Weighing, Check Weighing, Animal/Dynamic Weighing, Totalization, Density Determination, Display Hold, Molar Weighing Display 4.3' (109mm) touchscreen display with color VGA graphics resolution and user controllable brightness Operation Power supply (adapter supplied) or batteries (not supplied) with low battery level indicator and programmable automatic shutdown Communication RS232, USB host, USB device, Ethernet or Bluetooth® (available as accessories) Framework ABS housing, stainless steel pan, ABS draft shield (1 mg models only), weigh below hook, transport lock, manual calibration lock switch, security slot, stabilizing feet, level indicator illuminated front Construction features Stability indicator, stackable design with included storage cover (except 1mg models), mechanical and software overload and underload protection, battery life indicator, auto power off, auto tare, calibration weight provided in models with capacity greater than 620 gr. THE TOUCHSCREEN DISPLAY Using portable scales has never been easier! The color touchscreen display allows you to explore the interface and icon menu, open and close application modes, change units of measure with a single touch of the screen. In seconds, an unmatched level of portable weighing efficiency and functionality. In addition, GLP/GMP traceability makes it easier to monitor and report data.

BINDER BD-115 incubator / oven with natural convection 100°C Model: BD115 Capacity: 115 liters Tempe (more)rature range: Room temperature plus 5 °C to 100 °C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the left wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 400 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83.5 x 75 x 70.5 cm Weight: 61 kg Tested at 37°C

This item has just arrived in our stock. Please enquire for further details.

Polyscience 6860P46A270D Durachill Chiller with Positive Displacement Pump, Air-Cooled, 5° - 35° C,  (more)5200W, 230V 60HzDuraChill Chillers provide cooling power for demanding applications and serve as an economical alternative to tap water cooling systems. All models feature a microprocessor-based controller, digital Temperature Display (°C or °F), one-touch set point display, and digital Pressure/Flow Rate Display (PSI, kPa, GPM, LPM) with push-Button selection. To optimize cooling efficiency and performance, these sophisticated Chillers also feature a modulated refrigeration system. As a result, temperature stability is greatly enhanced and compressor life extended.Features High capacity cooling for lasers, electron microscopes, and other laboratory applications Small footprint conserves floor space Displays temperature and pressure or flow rate simultaneously User-adjustable temperature, pressure, and flow rate alarms Simple operation and maintenance Air- or water-cooled Positive displacement (PD) or turbine (T) pump; other pump options also available INCLUDED: The Polyscience 6860P46A270D Durachill Chiller with Positive Displacement Pump, Air-Cooled, 5° - 35° C, 5200W, 230V 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - Full 2 Year Parts and Labor Warranty - Two sets of Inlet/Outlet Adapters: ½ inch male NPT x ½ inch hose barb and ½ inch male NPT x 5/8 inch hose barb Polyscience 6860P46A270D Durachill Chiller with Positive Displacement Pump, Air-Cooled, 5200W, 230V 60Hz SpecificationsKey SpecificationsDescription1.5 HP Chiller, Positive Displacement; Air-CooledDisplayLEDConnectivityOptional: RS232, RS485Working Temperature Range °C5° to 35°Temperature Stability °C±0.5°Temperature Calibration Capability1-pointPump TypePositive Displacement 60 Hz OnlyPart Number6860P46A270DMaximum Pressure (psi)100.0Maximum Pressure (bar)6.90Maximum Pressure Flow Rate (gpm)3.50Maximum Pressure Flow Rate (l/min)13.2Cooling Capacity @ +10°C (W)4420Cooling Capacity @ +20°C (W)5200Cooling Capacity @ +30°C (W)5980Heater Wattage1000Electrical Requirements (VAC/Hz/Ph/A)230/60/1/21.1Regulatory ApprovalsTUVDownloadsTechnical Specification Download Operator's Manual Download

F1 class mass standards are exceptional measuring tools that represent the pinnacle of precision in  (more)the field of metrology. Classified as F1 metrology class, they are perfect for advanced applications where every detail of measurement is of paramount importance. F1 class standard: stainless steel wire Nominal value: 10 mg Material: stainless steel Highest Precision and Accuracy F1 class mass standards are characterized by absolute measurement precision and extraordinary accuracy. They are designed to meet the most stringent standards for acceptable deviation from actual weight. Stability under Difficult Conditions An important feature of F1 class mass standards is their ability to maintain measurement stability even under harsh environmental conditions. The standards of this class are resistant to changes in temperature, humidity and other factors that affect the precision of measurements. Calibration in Accordance with International Standards The calibration process for F1-class mass standards is rigorous and in accordance with international standards. This ensures that standards of this class are globally recognized and can be used in different countries. Specialized Construction Materials F1-class standards are often made of materials with unique physical properties. This provides them not only with precision, but also with durability and wear resistance. Applications 1. Industrial Metrology F1 class mass standards are used in metrology laboratories engaged in the testing and maintenance of measurement standards. 2. Scientific Research In scientific research, especially in high-precision fields such as physics and astronomy, F1-class mass standards are a key tool. 3. Aerospace Industry In the precision mass measurements required by the aerospace industry, F1-class standards guarantee reliability and accuracy. 4. Calibration Laboratories In calibration laboratories where uniformity and precision are a priority, F1-class mass standards are the standard of excellence. F1-class mass standards are synonymous with the highest quality and precision in the field of metrology. Their use is crucial where even the slightest deviation from the standard can carry unpleasant consequences. They are tools for advanced applications that contribute to raising standards in the field of mass measurement.