Shimadzu A371-22-919 119474819

Agilent 1100 system consisting of: 1x Agilent 1100 Degasser type G1379A 2x Agilent 1100 Isocratic Pu (more)mp type G1310A 1x Agilent 1100 Variable Wavelength Detector type G1314A 1x Agilent 1100 Fluorescence Detector type G1321A 2x Solvent tray Manual injector with 1 ml sample loop Laptop Agilent 1100 IsoPump: Hydraulic system: Dual piston in series pump with proprietary servo-controlled variable stroke drive, floating pistons and active inlet valve Setable flow range: 0.001 – 10 ml/min, in 0.001 ml/min increments Flow range: 0.2 – 10.0 ml/min Flow precision: < 0.3 % RSD (typically 0.15 %), based on retention time, at 1 ml/min Pressure: Operating range 0 – 40 MPa (0 – 400 bar, 0 – 5880 psi) up to 5 ml/min, Operating range 0 – 20 MPa (0 – 200 bar, 0 – 2950 psi) up to 10 ml/min Pressure pulsation: < 2 %amplitude (typically < 1 %), at 1 ml/min isopropanol, at all pressures > 10 bar (147 psi) Compressibility compensation: User-selectable, based on mobile phase compressibility Recommended pH range: 1.0 – 12.5, solvents with pH > 2.3 should not contain acids which attack stainless steel Dimensions (HxWxD): 140 x 345 x 435 mm Weight: 11 kg Agilent 1100 VWD: Detection type: Double-beam photometer Light source: Deuterium lamp Wavelength range: 190–600 nm Short term noise (ASTM): ± 0.75 x 10-5 AU at 254 nm Drift: 3 x 10-4 AU/hr at 254 nm Linearity: > 2 AU (5%) upper limit Wavelength accuracy: ± 1 nm Self-calibration with deuterium lines, verification with holmium oxide filter Band width: 6.5 nm typical Flow cell: 14-µl volume, 10-mm cell path length and 40 bar (588 psi) pressure maximum Dimensions (HxWxD): 140 x 345 x 435 mm Weight: 11 kg Agilent 1100 FLD: Detection type: Multi-signal fluorescence detector with rapid on-line scanning capabilities and spectral data analysis Light source: Xenon flash lamp Pulse frequency: 296 Hz for single signal mode, 74 Hz for spectral mode Excitation monochromator: range; 200 – 700 nm and zero-order,  bandwith; 20 nm, monochromator; concave holographic grating F/1.6 blaze 300 nm Emission monochromator: range; 280 – 900 nm and zero-order,  bandwith; 20 nm, monochromator; concave holographic grating F/1.6 blaze 400 nm Spectrum acquisition: Excitaiotn or emmision spectra, scan  speed; 28 ms per data point, step size; 1 – 20 nm Wavelength characterisric: Repeatability; ±0.2 nm, accuracy; ±3 nm Flow cell: 8 µl volume and 20 bar pressure, quartz Dimensions (HxWxD): 135 x 345 x 435 mm Weight: 11.5 kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Angular rotor for centrifuge Nr.1379 HERAEUS SEPATECH For BIOFUGE centrifuge 24 positions With lid

This Perkin Elmer Flow Cell was removed from a university lab where it was surplus to requirements.  (more)The unit is in good cosmetic condition with very limited usage marks. It has not been tested.

Grey Table On Wheels Lab This item was removed from a university where it was surplus to requirement (more). It is in good cosmetic condition, with minor marks from use.

System consists of: Agilent G1322A Degasser Agilent G1311A Quaternary Pump Agilent G1313A Autosample (more)r Agilent G1316A Thermostatted Column Compartment Agilent G1314A Variable Wavelength Detector

Eppendorf 5702R Centrifuge 230V with A-4-38 Rotor Max. Speed 4,400 RPM Max. Capacity 4 x 100ml Max. (more) RCF 3,000 x g Features - Holds up to 4 x 100 ml samples for versatile lab applications - Temperature control range from -9°C to +40°C, suitable for temperature-sensitive samples - Compact design with a 20.7-inch height (lid open) for under-shelf placement - Quiet operation minimizes noise in lab environments - Timer range from 1 to 99 minutes with continuous run option - FastTemp for rapid pre-cooling and continuous cooling when idle - ECO switch-off activates after 8 hours of inactivity to conserve energy - Two program keys allow quick access to frequently used settings - Supports a maximum speed of 4,400 RPM and 3,000 x g (RCF) for efficient sample processing The Eppendorf 5702R centrifuge has a maximum speed of 4,400 rotations per minute, and a maximum g-force of 3,000 x g (RCF). The Eppendorf 5702R has a maximum capacity of 4 x 100ml samples and a timer with a time range between 1 and 99 minutes, with a continuous setting as well. Temperatures from -9C to +40C. With a relatively small footprint, the Eppendorf 5702R benchtop centrifuge can be used in a variety of applications without taking up valuable countertop real estate. The 5702R has a total weight of only 84 pounds, and a maximum height (lid open) of 20.7 inches, making it perfect for under the shelf usage. The 5702R can be used in a range of settings, from clinical to cell culture labs. The Eppendorf 5702R Centrifuge 230V is new in the box INCLUDED: TheEppendorf 5702R Centrifuge 230V w/ A-4-38 Rotor Rotor includes: - A-4-38 Swing Bucket Rotor with Buckets - 1 Set of 4 x 10ml Vacutainer Adapters - 1 Set of 2 x 15ml Adapters - Power Cord - Full 6 Month Parts and Labor Warranty Eppendorf 5702R Centrifuge 230V with A-4-38 Rotor SpecificationsMaximum Speed4,400 RPMMaximum g-Force3,000 x g (RCF)Maximum Capacity4 x 100 mlTimer1 – 99 minutes continuousHeight with lid open20.7 inchesTemperature Control-9C to +40C