HP HPLC System 1100 Series HPLC System Lab

Gynkotek  P 580 A HPLC Pump & Dionex UVD 170S UV Detector System This was removed from a un (more)iversity lab where it was surplus to requirements. The system powers up but has not been tested further. It is in reasonably good cosmetic condition with marks from use. It comprises of; 1 x Gynkotek HPLCType - P 580A 1 x Dionex UVD 170SPN - 6068.4000A 1 x Dell Optiplex G1 with Keyboard & MouseModel no. MMPChromeleon Client Version 4.20 Build 350 1 x Box including:-Gynkotek HPLC Pump Series P580 Operating InstructionsGynkotek HPLC UV/VIS Detector UVD 170S/340S Operating InstructionsChromeleon Chromatography Data Systems Version 4.20 Software CD & Tutorial

This Agilent Technologies HPLC 1200 Series G1311A Quat Pump Quaternary was removed from a university (more) lab where it was surplus to requirements. The item is in good cosmetic condition and powered up, as seen the item is missing the front door panel. We are unable to test this item further at our facility.

Gilson HPLC System & Accessories - 306 - 811B - 805 - 832 - 7955- 119 - 506C This was removed fr (more)om a university lab where it was surplus to requirements. This is a large system. Most of the units have been powered up but it has not been tested further. We anticipate it may take some level or refurbishment to get it back to full working order. Included are; 1x Gilson XL Sampling injector:Model 231 The unit powers on and is in good cosmetic condition 2x Gilson Piston Pumps:Model 306 The units both power on and are in good cosmetic condition. 1x 15 pin MALE to FEMALE Ribbon cable:The unit is in good cosmetic condition. 1x Gilson Manometric Module:Model 805 The unit is in good cosmetic condition.There was no power port on the unit, it must be powered by a controller cable connected via a 306 Pump. 1x Gilson Dynamic Mixer:Model 811B The unit powers on and is in good cosmetic condition. 1x Gilson Temperature Regulator:Model 832 • Version 1.01The unit powers on and is in good cosmetic condition. 1x Gilson Collum Chiller:Model 7955 The unit powers on and is in reasonable cosmetic condition. 1x Gilson UV/VIS Detector:Model 119 •Version 2.01 The unit powers on and is in good cosmetic condition. 1x Gilson 506C System Interface unit:The unit is in good cosmetic condition. No sign of power. 1x 25 pin MALE to FEMALE serial cable for the (Gilson 506C System Interface unit)The unit is in good cosmetic condition. 1x 25pin Male to 9pin FEMALE connector adaptor.The unit is in good cosmetic condition. 1x Gilson Dilutor:Model 401 The unit powers on and is in good cosmetic condition. 1x Decade Electrochemical Amperometric Detector: ANTEC LeydenVersion 3.02The unit powers on and is in good cosmetic condition. 1x Viglen Contender PC:Model C3000A *OSWindows 98 •SoftwareUniPoint LC Version 3.01 The unit powers on. Accessories: 1x Viglen MonitorModel TS700 The unit powers on and is in good cosmetic condition. 1x Viglen KeyboardModel KB-0325 •PS/2 connector The unit is in good working and cosmetic condition  1x Microsoft Mouse:FCC ID: c3kkmp1 •PS/2 connector 1x VGA Cable:The unit is in good working and cosmetic condition. CD:1x Gilson UNIPOINT for Windows 98Version 3.0 Floppy Disk:Gilson System Software: •Version 1.71 •Disks 1 - 4Ser no. 219H8B765The units are in good cosmetic condition. •Win32s Disks 1-2The units are in good cosmetic condition. 2x Gilson 10WSC heads (cases)Ref E50056 • 3x Gilson WSC Pistion Pump Head user guides are inside the cases. 1x Gilson Thermostatic Rack Unit:Ser no. 270J1G048 The unit powers on via the (Gilson 832 temperature regulator)the unit is in good cosmetic condition. Gilson Racks for the thermostatic unit. 1x Rack Well, 60x 2ml glass or plastic vials.Part no 30 1x Rack Well, 108 x 0.7ml glass or plastic vials.Part no 31 The units are in good cosmetic condition. 1x Gilson Serial Input/Output Channel: 5 sets of( 2x FEMALE to 1x MALE 9pin connectors) Manuals:1x Unipoint system software: (Folder)The manual is in good condition and appears to be complete. 1x Gilson 506C System Interface User Guide:The manual is in good condition and appears to be complete. 1x Gilson 401 Dilutor Instruction manual:The manual is in good condition and appears to be complete. 2x Gilson 231-401 Auto Sampling Injector Instruction manual:The manuals are in good condition and appear to be complete. 1x Gilson 119 uv/VIS Detector User Guide:The manual is in good condition and appears to be complete. 1x 802C. 803C, 804C Manometric Module Instruction manual:The manual is in good condition and appears to be complete. 2x Gilson 306 Piston Pump User Guide:The manuals are in good condition and appear to be complete. 3x Gilson WSC Pistion Pump Head User Guides:The manuals are in good condition and appear to be complete. 1x Gilson UNIPOINT for Windows 98 User Guide:The manual is in good condition and appears to be complete. 2x 1x Decade Electrochemical Amperometric Detector Manuals:The manuals are in good condition and appear to be complete. 1x Gilson 832 Temperature Regulator User Guide:The manual is in good condition and appears to be complete. 1x Gilson 811B Dynamic Mixer User Guide:The manual is in good condition and appears to be complete. 1x Gilson 805-806-807 Manometric Modules User Guide:The manual is in good condition and appears to be complete. 1x Gilson SC- type Piston pump head Instruction manual:The manual is in good condition and appears to be complete. 1x Gilson 506C System Interface User Guide:The manual is in good condition and appears to be complete. 1x Gilson 506 Contact/ Modem Operators Guide:The manual is in good condition and appears to be complete. Syringes: 2x Phenomenex HPLC Columns:Model SYNERGI 4U Hydro- RP 80A 1x •Size 250x4.60mm1x •Size 250x3.00mm The units are in good cosmetic condition. 1x Phenomenex HPLC Column:Model SYNERGI 4U Polar - RP 80A •Size 250x4.60mm The unit is in good cosmetic condition. 1x Phenomenex HPLC Columns:Model HyperClone 5u ODS (C18) 120A •Size 250x4.60mm The unit is in good cosmetic condition. 1x Phenomenex HPLC Columns:Model HyperClone 5u SILICA 120A •Size 250x4.60mm The unit is in good cosmetic condition. 1x Phenomenex HPLC Columns:Model Phenosphere - NEXT 5u C18 •Size 250x4.60mm The unit is in good cosmetic condition. 2x HYPERSIL (5u ODS) Syringes:Prod no. 30105-062 •Size 150x4.60mm The units are in good cosmetic condition. 1x HYPERSIL (5u HyPURITY) Syringe:Prod no. 21005-022 •Size 150x4.60mm The unit is in good cosmetic condition. 2x HYPERSIL (ELITE C18 5u) Syringes:Prod no. 30105-062 •Size 150x4.60mm The units are in good cosmetic condition. 2x Phenomenex SYNERGI 4u Hydro -RP 80A Syringes:Part no. 00G-4375-E0 •Size 250x4.60mm The units are in good cosmetic condition. 1x Phenomenex HYPERSIL 3u C18 (ODS) Syringe: •Size 100x2.00mm The unit is in good cosmetic condition. 1x Phenomenex HYPERSIL 4u MAX -R P 80A Syringe: •Size 150x4.60mm The unit is in good cosmetic condition. 1x Phenomenex LUNA 3u c18(2) 100A Syringe: •Size 100x2.00mm The unit is in good cosmetic condition. 2x HYPERSIL 3 C18 Syringes: •Size 100x4.60mm The units are in good cosmetic condition. 1x Phenomenex BIOSep- SEC-S 200 Syringe: •Size 300x7.80mm The unit is in good cosmetic condition. 1x Phenomenex JUPITER 5u C18 300A Syringe: •Size 150x4.60mm The unit is in good cosmetic condition. 1x Hamilton Microliter Syringe:Model no. 1802RSNE •25uL The unit is in good cosmetic condition. 1x Hamilton Microliter Syringe:Model no. 1801RSNE •10uL The unit is in good cosmetic condition. 1x Hamilton Microliter Syringe:Model no. 801RNE WAT •10uL The unit is in good cosmetic condition.

Waters Acquity UPLC H07UPT, H07UPA, H07UPB & F07UPH System This item was removed from a univers (more)ity where it was surplus to requirement. All included units are in good cosmetic condition and power on independently, we are unable to test them further as a system at our facility. This system comprises the following: 1 x Waters Acquity TUV Detector- H07UPT1 x Waters Acquity Sample Manager- H07UPA1 x Waters Acquity Binary Solvent Manager-H07UPB1 x Waters Acquity Ethernet Box -F07UPH

This Dionex UltiMate 3000 HPLC System was removed from a university lab where it was surplus to requ (more)irements. This system has been inspected and tested by a qualified engineer. As a whole the system has passed. All modules that require software have been tested with Chromeleon v 6.8 and all modules communicate successfully. This system comes with Chromeleon v 6.8 installed on a PC but does not include a license and dongle. 1x Thermo Dionex AXP Metering Auxiliary PumpS/N Z0040311Powers on - Tested 2.5ml to over 1000 psi working as should no leaks 1x Dionex UltiMate 3000 Variable Wavelength Detector VWD-3100P/N 5074.0005S/N 8022629Powers on Status ok 1x Dionex UltiMate 3000 Pump LPG-3400 ABP/N 5037.0015S/N 8022830Firmware 3.05The system has been modified by a client from a quaternary to a binary pump. Pump tested at 2.5ml a minute, pressure steady at 12000psi, no leaks.All ok 1x Dionex UltiMate 3000 SR-3000 Solvent Tray without DegasserP/N 5035.9200 1x Dionex UltiMate 3000 SRD-3600 Solvent Tray with 6 Degasser channelsP/N 5035.9230S/N 8019828Powers on. Self-check ok. Status ok. Vacuum test pass. 1x Dionex UltiMate 3000 SRD-3600 Solvent Tray with 6 Degasser channelsP/N 5035.9230S/N 1050601Powers on. Self-check ok. Status ok. Vacuum test pass. 1x Dionex UltiMate 3000 Analytical Autosampler WPS-3000 TP/N 5820.0020S/N 1000605Powers on. Self-check ok. Status ok. 1x Dionex UltiMate 3000 Column Compartment TCC-3000 SDP/N5730.0010S/N 8021955Firmware 1.20. Passed all functions test. Both switching valves work. The temperature cools and heats as should. The temperature is stable 1x Dionex UltiMate 3000 Fraction CollectorS/N 12904 AFC 3000Powers on. Connects with software. USB works but driver not present in the software 1 x Dionex UCI-50 Universal Chromatography InterfaceP/N 5911.0005S/N 8022442Powers on.

CLIMATE CHAMBERS KKS SMART POL-EKO KKS - RELIABLE AND HIGHLY CUSTOMIZABLE Built and designed without (more) compromise, they are successfully used in medical, biotechnological, chemical and industrial laboratories. An important application is pharmaceutical stability testing according to ICH Q1A (R2) - (CPMP/ICH/2736/99). They maintain a constant temperature from 0°C to 100°C and thanks to an steam humidifier, they regulate humidity from 10% up to 90%. They are equipped with the most advanced POL-EKO control panel: the Smart PRO touchscreen. Large 7' display, WiFi for communication and data transfer, programming, alarms, internal memory for recording and overview of data in graphic form and much more, including standard software for complete management via PC. Continue reading and discover all the other surprising features of these climatic chambers! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. Thanks to SMART PRO you will be able to have possibilities that you didn't have before. Cutting-edge functions and freedom of transfer and remote use, thanks to LabDesk software. You can find all the features of the SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PRO PANEL? - Sharp 7' color touch screen - LAN, USB and WiFi ports for communication and data transfer - Fast, multi-segment, time and temperature programming - Adjustable ramps - Recording of the minimum, average and maximum temperature value for each segment - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - Fan speed control 0...100% or 10%...100% (depending on chamber capacity) - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Temperature sensor failure alarm - Event log with user notifications - Controls can be managed even when wearing latex gloves - Overview of the set and current parameters during operation in tabular and graphical form - Operation in temperature or time priority mode - Ability to create user accounts with assignment of rights and passwords - Memory of 40 user programs - Data log – 10,000 data records for each user, ability to view data on screen in tabular or graphical form - Direct data download via USB port - Event log QUALITY FIRST Resistant. Durable. POL-EKO climatic chambers are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The climatic chambers of the KKS Smart series are builded with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal glass door - Interior made of acid-resistant stainless steel according to DIN 1.4301 - Stainless steel grill shelf (INOX) - Overtemperature protection class 3.3 according to DIN 12880 - Castors - Quality control protocol (at +25°C and 60%rH) - Automatic defrost function - USB port, LAN (with cable) and Wi-Fi connection - Lab desk software - External probe insertion hole diam. 30mm to the left - Deionized water tank - Open door alarm KKS SMART PRO SERIES POL-EKO offers 4 climatic chamber models with capacities from 109 to 749 litres. Unleash your possibilities. In the image below, the graph shows the excellent working range (humidity/temperature) that the POL-EKO climatic chambers are able to offer you, with the KK series (ultrasonic humidifier) ​​and with the KKS series (steam humidifier ). STEAM HUMIDIFIER The KKS climatic chambers with steam humidifier do not emit ultrasound and therefore allow the reproduction of insects (e.g. Drosophila melanogaster). Compared to KK chambers they have a wider temperature and humidity range and can be used for testing electronic components, plastics or building materials. NOTE: common water (conductivity 125-1250 μS/cm) can be used as a source. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Fan 3 - Internal glass door 4 - Hole for ø30mm external probe 5 - Shelf 6 - Position of the condenser 7 - Wheels with lock 8 - Solid external door (optionally with window) 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Power cable 3 - Connectors 4 - Connection to tap water 5 - Connection to the reverse osmosis system 6 - Control valve 7 - Connection to demineralised water 8 - Connection to the drain 9 - Connection for assistance 10 - LAN port 11 - Fuse Together with the climatic chamber you will also receive: OPTIONS POL-EKO allows you to increase the possibilities of your climatic chamber with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Door with panoramic window - Stainless steel grill shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Internal socket - IQ OQ PQ calibration and qualification - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door - Access control system (card, key tag or device equipped with NFC, for example smartphone) ◉ POL-EKO CUSTOMERS The SPEKTROCHEM research and development center for paints, adhesives and polymers has been a loyal POL-EKO customer for several decades. Use climatic chambers for tests on water-based raw materials prepared in the laboratory. FUN FACT? Thanks to the climatic chambers it is possible to create excellent food products, such as black garlic, which needs to ferment at stable temperatures and humidity. Download the informative pdf: Black Garlic with POL-EKO.

Terminal for Industry The PUE C315 terminal is intended for fast and precise presentation of mass me (more)asurement result. Taring available for the whole weighing range allows to swiftly and precisely determine net mass of weighed loads. An ABS plastic housing ensures durability and lightness of the construction. Uncomplicated Operation and Clear Presentation of Indications A clear 6-digit LCD display with backlight and pictograms provides clearly visible measurement result. Easy operation enables fast and reliable measurements to be carried out even by an inexperienced operator. Mobility due to an Internal Battery In addition to power supply from the mains, PUE C315 terminal is equipped with internal battery that enables several hours long mobile operation. Versatility of Use Various possibilities of fastening of the PUE C315 terminal to the weighing platform enable selecting appropriate solution for different places of operation. The terminal can be mounted next to the platform, on a post or using cable. ALIBI Memory Internal ALIBI memory guarantees safety and automatic record of measurements copies, it also offers possibility to preview, copy and archive data.

Hermle 15ml Conical Insert (2pk) The Hermle 15ml Inserts are for use with the 6 x 85ml Rotor for the (more) Z326 and Z326 K centrifuges. INCLUDED: The Hermle 15ml Conical Insert (2pk) includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Crest Ultrasonics Perforated Basket for P1100 Ultrasonic Cleaner The Crest Ultrasonics Perforated Ba (more)sket for P1100 Ultrasonic Cleaner features a mesh size of 8 x 8mm and a wire thickness of1mm making this ideal for use inultrasonic cleaning.All baskets are equipped with drain handles, helping toprevent unnecessary carryover of the cleaning agent andkeeps your workplace clean. The Crest Ultrasonics Perforated Basket for P1100 Ultrasonic Cleaner is 11.5" in length x 8.5" in width x 7" in depth and is for use with the P1100 Ultrasonic Cleaners. The Crest Ultrasonics Perforated Basket for P1100 Ultrasonic Cleaner is brand new in box . Includes a Full 1 Year Parts and Labor Warranty.