Hitachi Merck F-1080 HPLC Fluorescence Detector Fluoreszenz Detektor 200-900 nm

This Dionex ICS-3000 ION Chromatography System was removed from a university lab where it was surplu (more)s to requirements. The system has been professionally serviced and is in full working order. A full report is available on request. It is in good cosmetic condition with minor marks. SP:Powers on okCommunicates with ChromeleonRetrieves data configurationPump primes and operates DC:Firmware 2.6.0Powers on okCommunicated with ChromeleonRetrieves data configurationInject valve separates okOven heats to set temperature on both zonesAll ok AS50:Firmware 1.21USB rev 1.00All diagnostics tests passedAll internal tests passedInject port alignment checked and okNew Syringe fitted.

This item has just arrived in our stock. Please enquire for further details.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The GE AKTA Purifier 10 FPLC System is versatile, modular liquid chromatography systems for fast and (more) reliable separations of proteins, peptides, and nucleic acids by FPLC. AKTA Purifier 10 is designed for purification of microgram to milligram quantities of protein, operating at flow rates of 0.001 to 10 ml/min at pressures of 0 to 25 MPa. Flow Rate Range: Isocratic mode: 0.01 to 100 ml/min in steps of 10 µl/min Gradient mode: 0.01 to 100 ml/min in steps of 10 µl/min Double mode: 0.01 to 200 ml/min in steps of 10 µl/min Pressure Range: 0 to 10 MPa (100 bar, 1450 psi) pH Stability Range: 1 to 13 (1 to 14 with <1 day exposure) Viscosity: Max 5 cP Flow Rate Accuracy (0.2 – 10 MPa): ± 2% or 20 µl/min, whichever is greater Flow Rate Reproducibility (flow rate ≥ 0.5 ml/min): rsd < 0.5% Gradient Composition Accuracy: < ±1% at 0.5 to 100 ml/min Gradient Composition Reproducibility: rsd < 0.25% at 0.5 to 100 ml/min Pressure Sensor Range: 0 to 27.5 MPa Offset error: < 0.05 MPa Scale error: < ±2% Total Volume Between Inlet and Outlet: < 800 µl/module Wavelength range: 190 – 700 nm in steps of 1nm, 3 wavelenghts simultaneously Bandwidth: 4 nm Wavelength accuracy: ±2 nm Wavelength reproducibility: ±0.01 nm Wavelength switch time: < 500 ms (one cycle from 214 nm to 254 nm and back to 214 nm) Linearity: <2 % deviation up to 2 AU at 260 nm with Uracil at pH 2 Noise: Single wavelength (short term, 0.5 – 1 min): <6×10⁻⁵ AU at 230 nm Single wavelength (long therm, 1 – 10 min): <6×10⁻⁵ AU at 230 nm Dual wavelength (short term, 0.5 – 1 min): <2×10⁻⁴ AU at 230 nm and 254 nm Dual wavelength (long therm, 1 – 10 min): <2×10⁻⁴ AU at 230 nm and 254 mm Drift: <2×10⁻⁴ AU at 254 mm System consists of: UPC-900 monitor P-900 pump P-960 pump 2x INV-907 valve 2x PV-908 valve FRAC-950 fraction collector PC

This Molecular Devices ImageXpress Micro System was removed from a university lab where it was surpl (more)us to requirements. 1 x Molecular Devices ImageXpress Micro.The unit is fitted with the Transmitted Light Option.It also comes with the ImageXpress Micro Options controller (Environmental Controller).And the dedicated power supply. 1 x Sutter Instruments Xeon Lamp unit with liquid light guide.Also comes with manual and a spare used/unknown bulb. Unit comes with the following objectives in a Black Peli case. 1 x Nikon Plan UW1X/0.04∞/- WD 3.2 1 x Nikon Plan Fluor10X/0.30DIC L/N1∞/0.17 WD 16 1 x Nikon S Plan FluorWLWD 20X/0.45Ph1 ADM 1 x Nikon Plan Fluor10X/0.30Ph1 DL∞/1.2 WD 15.2 1 x Nikon S Fluor4X/0.20∞/- WD. 15.5 1 x Nikon Plan Apo2X/0.10∞/- WD 8.5 Also included in the system: 2 x PC's with monitors:1 (Dell) is the original unit that no longer contains any relevant software.The other (Stone) was originally being used with the system but without a monitor.It contains the ImageXpress software (3.1.0.97) that controls the Micro unit.1 monitor appears to be faulty, the other works fine. 1 x Molecular Devices software box that contain various software and a pair of dongles for the PC. 1 x Black Peli Case that houses the objectives, test slide etc. 1 x Box containing all the connector cables. 2 x Pieces of ducting for the environmental control and the exit of the Xeon lamp. The system has been fully checked by a Molecular Devices engineer. It was reported as being in good working order. The MetaXpress PC is was used by the engineer to perform the checks on the system.We are able to supply the full engineer report on the ImageXpress Micro unit. It might also be possible for us to offer a full installation package, training and other services with the system (for an additional charge). Please enquire for more details.

TQ TD1050 Steam Engine Trainer Teaching Apparatus Rig This was removed from a university lab where i (more)t was surplus to requirements. It is in full working order. Included are; TD1050 General AssemblyTQ165554-001 TD1050 - DTS2 Torque/Speed Display UnitTQ160508-001 TD1050-DT1 Temperature DisplayTQ165554-001 VDAS-F - VDAS Frame Mounted VersionTQ156326-009 Grosvenor PumpModel - 5583SN - 21278 Dynatherm Part no. 42673SN - 13107-1

This listing is for a QuattroFLow QF15SU-U Single-use Pump Diaphragm Pump. The unit is in full work (more)ing condition and is ready for immediate release. The Quattroflow QF15SU-U is a specialized 4-piston diaphragm pump designed for single-use in biopharmaceutical applications. Its features and applications make it particularly advantageous for handling delicate fluids. Here’s a closer look: Key Features: Single-Use Pump Chamber: Constructed from plastic, this design significantly reduces contamination risks and the need for cleaning between uses. 4-Piston Diaphragm Design: Ensures smooth and consistent flow, critical for sensitive applications. Self-Priming Capability: Can operate without priming, enhancing operational convenience, especially in processes where fluid levels fluctuate. Dry Running Capability: The pump can run dry without damage, providing flexibility in various operating conditions. No Rotating Parts: This design feature prevents heat generation and eliminates the risk of particle shedding, ensuring that the product remains uncontaminated and stable. Gentle Fluid Transfer: Designed to facilitate the safe and secure transfer of fluids, ideal for sensitive biological products. Applications: Biopharmaceutical Applications: Perfect for pumping aqueous solutions and biological products, especially those sensitive to shear forces, like proteins and enzymes. Research and Production Facilities: Suitable for use in laboratory or pilot plant environments, where precision and reliability are paramount. Re circulation of Feed/Retentate: Effective for processes involving membrane cassettes, hollow fibre, spiral wound, or ceramic filtration elements. Feed Pump for Filters: Works well as a feed pump for filter cartridges or plate and frame depth filters, ensuring optimal flow rates and minimal shear. Summary: The Quattroflow QF15SU-U stands out as a highly efficient solution for applications that require gentle handling of sensitive aqueous solutions. Its single-use design, self-priming ability, and lack of rotating parts make it an excellent choice for biopharmaceutical, biotech, food, and cosmetic sectors. This pump not only enhances process efficiency but also maintains the integrity of valuable biological materials throughout their handling and processing stages.

Sanyo MDF-U76V -86 Ultra Low Temperature Freezer Lab This item was removed from a university lab whe (more)re it was surplus to requirement. The unit powers up and is in good working order. It is in good cosmetic condition.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW