Hewlett Packard 1100 Series HPLC System, G1322A, G1312A, G1313A, G1315A Lab

Programmable flow rate: 0.00 to 5.00 mL/min, 0.01 mL/min increments Maximum operating pressure: 401  (more)bar Pressure ripple: <2% at 0.5mL/min Flow precision: 2 seconds SD Flow accuracy: 2% of setting Gradient accuracy: <1% between 10 to 90% Gradient precisison: <0.5% RSD between 10 to 90% Gradient delay volume: <60 µL (without mixer), <200 µL (with one 50 µL mixer) Inline degasser channels: 2 Dimensions (HxDxW): 430 x 610 x 305 mm Weight: 27.2 kg

Perkin Elmer HPLC System - 250 LC - 235C LC235C - 600 Link 610 This was removed from a university l (more)ab where it was surplus to requirements. Included are; Perkin Elmer 250 Binary LC PumpModel - 250SN - 141179Powers on Perkin Elmer Diode Array Detector 235CModel - LC235CSN - 235N6102304Powers on Perkin Elmer Nelson 600 Series LINKModel no. 610SN - 0033110033Powers on Tray with two waste bottles (the larger bottle has a hole in it) PC comes with 19" Monitor, keyboard &amp; Mouse - All power on and in working order. The PC has TotalChrom Workstation V6.20 installed, but is, unfortunately, password locked. Other bits include:-CablesGS Bottle DispenserPhenomenex Column - Jupiter 10u C4 300A (PN-03R-416-P0) 60 x 21.20mmPhenomenex Column - Jupiter 10u C4 300A (PN-004-4168-P0) 250 x 21.20mm

Varian ProStar System GC 410, PDA Detector,&nbsp;Solvent Delivery Module System Lab This system was  (more)removed from a university where it was surplus to requirement. All units are in good cosmetic condition and have powered on and passed self-check tests.We are unable to test them further at our facility as the system does not include a PC with relevant software. All units included are as follows: Varian ProStar Model 410 HPLC Autosampler LabP/N - 03-935290-03S/N - 20300 PDA DetectorModel - 330S/N - 00924Good condition. Solvent Delivery ModuleModel - 210S/N - 02241Good condition. Solvent Delivery ModuleModel - 210S/N - 02242Good condition.

A glove box is a hermetically sealed enclosure. It provides a working space in its inner side that i (more)s completely segregated from the outside. As an inert gas glove box it is designed to maintain in it’s inside an artificial atmosphere, typically consisting of pure nitrogen or pure argon with a concentration of oxygen and water vapour typically below 1 ppm. It is used to protect the product, which is handled inside the box from the outside, in particular from unwanted reaction with oxygen and/or water vapour (product protection).

Beckman Coulter Biomek 2000 Laboratory Automation Workstation Lab This was removed from a university (more) lab where it was surplus to requirements. The unit powers up but was not tested further as there is no software with it. It is in good cosmetic condition with minor marks. Included with it are; 1x PC connection cable1x Spare mounting plate1x Bioworks opertating system manual1x Bioworks version 1.4 release notes1x Biomek 2000 user manual1x Biomek 2000 quick start guide1x Biomek 2000 installation and maintenance guide1x Beckman plus tutorial

Applied Biosystems 7500 FAST Real-Time PCR System w/ PC &amp; Software Lab This system was removed  (more)from a university where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The PC runs Windows 7 and has the following software installed:Life Version 2.3 7500 Lamp Hours:409The lamp was replaced on 10/20/2020. The unit has not been calibrated, as it requires an Applied Biosystems real-time PCR system spectral calibration kit. Included with it are; 1 x Box of Microamp 96-well tray for Veriflex blocks. (factory sealed)1 x&nbsp;Kit, primer express V3.0.1 (factory sealed)1 x&nbsp;Box of&nbsp;EnduraPlate optical 96-well fast multicolour reaction plate with barcode (factory sealed)1 x. ASSY, OPTICAL TROUBLESHOOTING PLATE BLACK1x&nbsp;Pack of&nbsp;paper fluorescent green 3-1/16 inch x 4-5/8 inch (8pcs/pkt)1x&nbsp;Microamp Adhesive film applicator1 x 7500 Software pack (factory sealed)5 x Kettle Leads1x Type G Gbr Irl, Mlt, Mas, Sin1x Type F&nbsp;&nbsp;&nbsp;&nbsp;EU, Rus2x type B&nbsp;&nbsp;&nbsp;Usa, Mex, Can, Jpn1x&nbsp;type I&nbsp;&nbsp;&nbsp;&nbsp;Aus, Arg, Chin, Nzl

IKA KS 3000i Incubator Shaker Type of Movement Orbital Temperature Setting Range Room Temp. +5° - 80 (more) °C Speed Range 10 to 500 RPM Features - Large LED display for speed and time settings - Controls with antimicrobial coating for reduction of bacteria - Integrated PID temperature control (use of two PT 1000 temperature sensors) - Junction box in the workspace for connection of an additional temperature sensor e.g. PT 1000.60 - Electronic temperature and speed control - Electronic timer switch: 0 – 999 h (set by the minute or by the hour) - Optional built-in cooler for connection to an external cooling unit e.g. RC 2 basic / control - Unit switches off automatically if disturbed - Unit stops automatically when hood is lifted - Collecting tray with drain hose on rear of unit - Simple operation - All functions can be controlled and documented with labworldsoft - Attachments are not included in delivery, please order separately This innovative incubator shaker enables unattended operation in a precisely controlled environment, featuring orbital movement with a 20 mm shaking stroke and a maximum permissible shaking weight of 7.5 kg. It offers a speed range of 10 to 500 rpm, displayed on an LED screen, and controlled in 1 RPM steps. The unit includes a 7-segment LED timer, adjustable from 1 second to 59940 minutes, and operates in both timer and continuous modes. With a heating range from room temperature +5°C to 80°C and a 50-liter inner chamber, this shaker ensures precise temperature control and stability, ideal for various laboratory applications.

Gilson MINIPULS 3 Pump (Drive Unit) w/ Selectable High Flow Peristaltic Pump HeadFeatures - Utilizes (more) positive displacement pump technology that allows liquid to flow nearly pulse free as a result of ten stainless steel rollers - Produces smooth flows with excellent accuracy and precision, even at high flow rates - Interchangable heads allow for an array of possible applications - Easy to operate, install, and maintain due to simplistic functionality - All control buttons are readily accessible and intuitive to use - Small lab footprint and with a weight of only 5.5 pounds, makes the Minipuls 3 exceptionally portable. - Has a maximum flow range of 30 mL/min for standard models and 220 mL/min for high flow models - Remote start and stop possible The compact MINIPULS® 3 is a high-performance, low-pulse, peristaltic pump with interchangeable pump heads for delivering a diverse variety of liquids—from biological to chemical—without altering the critical components within the liquid. Six different channel and flow rate configurations are available.Pulse-free Liquid TransferUtilizing positive displacement pump technology, liquid flows nearly pulse-free as a result of as many as ten stainless steel rollers. The MINIPULS 3 produces smoother flows with excellent accuracy and precision, even at high flow rates. Its adjustable speed stepper motor and high-quality precision bore tubing assure reproducible flow rates.Flow Rates to Meet Your NeedsWith a choice of six quickly interchangeable pump heads, you’ll have a wide range of flow rates to use for your applications. • Four standard models (1, 2, 4, or 8 channels): 0.3 μL/min to 30 mL/min • Two high flow models (2 or 4 channels): 1 mL/min to 220 mL/minEasy to OperateGilson MINIPULS 3 is easy to install, simple to operate, and easy to maintain. With an uncomplicated keypad control and easy-to-read LCD screen, access functions for start/stop, flow direction, increase/decrease flow rate, and prime. Remote control is also possible.INCLUDED: The Gilson MINIPULS 3 Pump (Drive Unit) w/ Selectable High Flow Peristaltic Pump Head includes: - Selected High Flow Peristaltic Pump Head - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty