Applied Biosystems MDS Sciex 3200 Q Trap LC/MS/MS System With PC Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

AZURA preparative HPLC pump P 2.1L covers wide flow rate range and pressure capabilities. It has bee (more)n designed for purification of mg and gram samples. The Mobile Control allows intuitive control in stand-alone operation. The integrated automatic recognition of the pump head with RFID technology allows fast adaptions of the pump for various applications. Preparative pump offers wide range of flow rates (0.1-1000 ml/min) Choice of different LC software platforms Improved electronic drive compensation Integrated compressibility compensation Integrated leak management Constant pressure operation mode Solvent delivery Pump type: Preparative HPLC pump Delivery system: double piston pump with Al²O³ pistons Pump head: 250 ml/min Pump head materials: titanium Pressure sensor materials: PEEK (Polyether ether ketone) Maximum delivery pressure: 22.5 MPa (225 bar, 3260 psi) up to 100 ml/min, 20 MPa (200 bar, 2900 psi) at 250 ml/min Flow rate range: 0.1-250 ml/min, 0.5-200 ml/min (recommended) Flow rate increment: 0.01 ml/min Flow rate accuracy: ± 2 %, measured at 5 – 50 % of flow range using ethanol/water 10:90 Flow rate precision: < 0.2 % RSD Gradient support: isocratic, upgradeable to a binary HPG system with additionalpump P 2.1L or to a binary orternary LPG system HPG: gradient accuracy: ± 2 % (5 – 95 %, measured at 5 – 50 % of flow range, water/caffeine tracer) HPG: gradient precision: 1 % RSD, based on retention time at constant room temperature LPG: gradient accuracy:  ± 3 % (5 – 95 %, measured at 5 – 50 % of the flow range, water/caffeine tracer) LPG: gradient precision: 2 % RSD, based on retention time at constant room System protection: soft start, Pmin and Pmax are programmable Wetted materials: titanium,stainless steel, graphite fiber reinforced PTFE, FKM, PEEK, sapphire, aluminum oxide (Al²O³) Ambient conditions: temperature range: 10–40 °C; 50–104 °F, air humidity: below 90 % humidity (non condensing) Leak sensor: Yes Communication Control: LAN; RS-232; analog and event controlled Analog inputs: 0-10 V Analog control input: flow rate Level/event outputs: 8 event outputs (TTL, OC, relays) Programming: 19 programs + 9 links (to programs) + 1 wake up program Special features: system pump head is detected automatically using radio frequency identification (RFID) General Power supply: voltage range: 100 – 240 V, 50 – 60 Hz Dimensions: 361 x 208.2 x 523 mm (W x H x D) Weight: 19 kg

This Thermo Separation Products HPLC System was removed from a university lab where it was surplus t (more)o requirements. The system was working prior to removal but the PC was faulty and removed from the system. Included in the system are;1x Anachem unitThe unit powers on and is in good cosmetic condition. 1x TSP Vacuum Membrane DegasserModel SCM 1000The unit powers on and is in good cosmetic condition. 1x Spectra&nbsp;SystemModel P4000The unit powers on and is in good cosmetic condition. 1x Spectra SystemModel SN4000The unit is in good cosmetic condition.We have not powered up the unit. We believe it is powered by another unit in the system or a PC. 1x Thermo Finnigan Spectra System DetectorModel UV6000LPThe unit powers on and is in good cosmetic condition. 1x Spectra SeriesModel AS3000The unit powers on and is in good cosmetic condition. User Manuals:1x Spectra Series Autosamplers ref manual1x SCM1000 Vacuum Membrane Degasser ref manual1x UV6000LP Detector ref manual1x Spectra System &amp; Spectra Series Gradient Pumps ref manual1x Spectra System Autosamplers ref manual All units are in good cosmetic condition. We are unsure if&nbsp;the manuals are complete.

This listing is for a Sartorius YCW613-00 F1 1Kg Weight. The unit is in full working condition and  (more)is ready for immediate release. Product Type: Cylindrical Calibration Weight Classification: F1 Weight (Metric): 1000 g (1 kg)

Refrigerated centrifuge THERMO ELECTRON JOUAN GR4I With Rotor 11175338 Type: GR 4i Maximum centrifug (more)e speed: 8000 rpm refrigerated Voltage: 230V / 50/60Hz 1500 W Net weight: 200kg Maximum load: 3.6 kg Temperature range: -9 ° C to 40 ° C Dimensions (H x W x D): 80 x 85 x 66 cm With swinging bucket rotor 11175338 Maximum rotor speed: 4750 rpm With 4 M4 pods 11174218 with a capacity of 750ml + cover Replacement date on the Rotor: 09/2022 In good condition one of the corners of the front panel slightly deteriorated Year of manufacture: 2004

Waterproof stainless steel platform We provide you with waterproof stainless steel platforms with re (more)adability [d] from 1 g to 100 g and maximum capacity [Max] from 3 kg to 300 kg. The platforms are rectangular in 150 x 200 mm, 250 x 300 mm or 400 x 600 mm or square in 410 x 410 mm, 800 x 800 mm, 500 x 500 mm, 600 x 600 mm or 800 x 800 mm. Use the potential Our platforms can work with one of six weighing terminals to choose from: PUE H315, PUE C315, PUE 7.1, PUE HX7, PUE HY10 and PUE 5. The power of steel The use of stainless steel for both the pan and the frame guarantees you a long life for the platform. Fearless of its contact with moist objects or accidental splashes. The entire stainless steel construction translates into a high degree of protection for these platforms: IP 68.

KNF IP65 UFEM 1.10 ST.18RCP2 Liquid PumpKNF SIMDOS diaphragm pumps offer a variety of options to sui (more)t most laboratory liquid metering and dosing needs. The UFEM 1.10 ST.18RCP2 version has a liquid transfer flow rate of 1 – 100 mL/min and discreet dosing volumes of 1 – 999 mL. It is constructed with the following chemically-resistant flow path materials: stainless steel head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. Besides onboard manual control, this pump offers analog control, start/stop and reset/prime TTL logic control, output signal fault alarm, and RS 232 PC control. A RC control interface cable and RS 232 cable with D-Sub 9 connector are included. A foot switch for start and stop impulses is available. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 10 pumps are self-priming up to 9.8 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. INCLUDED: The KNF IP65 UFEM 1.10 ST.18RCP2 Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hermle 3 x 15ml Buckets (2pk) for 4 x 100 Swing Out Rotor The Hermle 3 x 15ml Buckets (2pk) for the  (more)4 x 100 Swing Out Rotor. INCLUDED: The Hermle 3 x 15ml Buckets (2pk) for 4 x 100 Swing Out Rotor includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty