Agilent G1367-60010 Needle carrier assembly for 1260 / 1290 HPLC G1367A/B/C/D

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Varian ProStar System GC 410, PDA Detector, Solvent Delivery Module System Lab This system was  (more)removed from a university where it was surplus to requirement. All units are in good cosmetic condition and have powered on and passed self-check tests.We are unable to test them further at our facility as the system does not include a PC with relevant software. All units included are as follows: Varian ProStar Model 410 HPLC Autosampler LabP/N - 03-935290-03S/N - 20300 PDA DetectorModel - 330S/N - 00924Good condition. Solvent Delivery ModuleModel - 210S/N - 02241Good condition. Solvent Delivery ModuleModel - 210S/N - 02242Good condition.

This Agilent Technologies 1200 Series HPLC G1312B Binary Pump was removed from a university lab wher (more)e it was surplus to requirements. The item is in good cosmetic condition and powered up, as seen the item is missing the front door panel. We are unable to test this item further at our facility. Power supply included.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

PRECISION REFRIGERATOR FOR PHARMACIES manufactured by B Medical System SECURITY AND PEACE OF MIND -  (more)Forced air cooling system for uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Safety thermostat that prevents the internal temperature from going below zero - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - Optional °B Connected universal software for remote monitoring, reporting (in accordance with FDA 21 CFR Part 11) and long-term archiving in combination with a data communication unit CONSTRUCTION AND TECHNOLOGY TO INCREASE THE EFFICIENCY OF THE REFRIGERATOR - Natural refrigerant with high cooling efficiency compliant with US SNAP and EU F-Gas regulations - Polypropylene structure injected with polyurethane foam that provides strong thermal insulation - 4-layer PMMA organic glass door offering maximum insulation, combined with weight reduction to reduce door closing efforts - Automatic internal LED lighting for lower energy consumption - Monobloc structure made with the exclusive rotational molding technique COMFORT OF USE AND DURABILITY - Easy access to parameters on a 7' touchscreen with temperature display - NFC card/password protected door lock mechanism - USB port and SD card slot for easy data export - Antibacterial coating for easy hygiene control - Silent - Low heat emission - Modular internal equipment - Easy access to lower drawers - Stainless steel and other high quality materials for durability PREMIUM Technology: New B Medical Systems 7" touchscreen display integrated into the door handle with pre-installed connection enabling unique monitoring capabilities; simplified door lock mechanism, with a large, heavy-duty handle; access/lock the opening using an NFC card; USB port and SD card slot. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical data sheet in Italian or in English for all the details.

Dimensions (HxWxD): 600 x 1200 x 330 mm Internal dimensions (HxWxD): 550 x 570 (x2) x 270 mm

MA X2.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Ohaus ST400D-G Portable DO Meter Measurement Range 0.00 – 20.0 mg/L(ppm); 0 – 50°C Measurement Accu (more)racy ±0.2 mg/L(< 8 mg/L) or ±0.3 mg/L(8~20 mg/L); ±0.3 °C Battery Life 12 hours with Disposable Batteries Features - Intuitive Software that Powers the Starter Series—Intuitive software and a well-organized display work in tandem to make operating the Starter Series a simple and straightforward task. - Compact and Ergonomic Design Creates a User-Friendly Experience—Starter portable meters fit comfortably in the palm of your hand. - Each meter comes equipped with a retractable built-in stand that can be used to prop it up on a flat surface. - Reliable Calibration Results for Accurate Measurement—Starter portable meters track the accuracy of the calibration process right on the display, so that you can measure with peace-of-mind. - Auto Barometric Pressure Measurement. - Auto Temperature Compensation with manual salinity compensation. - 99 measurement memory. - Last calibration data recall function. The OHAUS Starter Series Portable Dissolved Oxygen Meter is a compact and user-friendly meter, ideal for both field and lab measurements. It boasts a wide measurement range of 0.00 mg/L to 20.0 mg/L (ppm) and a temperature range of 0 to 50°C. The meter offers high accuracy with automatic temperature compensation and can store up to 99 readings along with the last calibration data. An easy-to-read color LCD screen displays readings clearly, while the intuitive software and ergonomic design ensure user-friendly operation. With features like auto barometric pressure measurement and manual salinity compensation, this meter offers reliable and accurate dissolved oxygen measurement in various environments. INCLUDED: The Ohaus ST400D-G Portable DO Meter includes: - 4 AAA Batteries - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Adam Equipment PMB 53 Moisture Analyzer, 50g, 0.001g/0.01% Capacity 50g Readability 0.001g / 0.01%  (more)Weighing Units g, %M, %S, ATRO %M, ATRO %S Features - Vivid, backlit LCD easily visible in any lighting conditions - Programmable backlight can be set to "always on," "always off" or "light only when weighing" - Capacity tracker built into display for easily monitoring possible overloads - Scratch-resistant aluminum housing protects internal components - Color-coded keys facilitate quick recognition of the most frequently used buttons - Pan lifter allows easy placement and removal of samples - RS-232 interface provides speedy connection to computers and printers along with a USB host for memory card and USB I/O interface - Temperature range 50°C to 160°C in one-degree increments - Three settings for heating samples include ramping, stepped temperatures and single temperatures - Seven preset drying modes allow test routines for several products - Audible overload alarm warns when capacity is exceeded - Testing can be set to start automatically when lid closes - Calibration for temperature and weight - Multilingual display permits use in various regions - Quick and easy configuration using the keypad - Zero-tracking feature ensures display returns to zero reading - Internal memory stores 49 different recipes and up to 99 test results, while additional test results and settings can be stored on a flash drive - Security slot for optional lock and cable to help prevent theft With simple operation and rapid response time, the Adam Equipment PMB Moisture Analyzers offer the top value in their class. The automatic test-setting function enables easy recall for frequent testing of the same items without additional user programming. USB and RS-232 interfaces provide computer and printer connections to store test programs and results. There is no need for additional software to take readings, giving users total freedom to collect data on a production floor or in the field. A single 400-watt halogen bulb heats samples in 1 °C selectable increments. Three heating options give users the flexibility to customize test methods and temperatures for different materials. The PMB Moisture Analyzers can be used to accurately determine the moisture content in food samples, oils and creams. These analyzers are suitable for cosmetics, agriculture, food testing and science laboratories. INCLUDED: The Adam Equipment PMB 53 Moisture Analyzer, 50g, 0.001g/0.01% includes: - Pan Support - Stainless Steel Lower Chamber Insert - Sample Pan Lifter - 10 x Sample Pans - RS-232 Interface Cable - USB to PC Cable - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty