Cohesive Technologies TurboFlow HTLC SAX 0,5 x 50 mm P/N: 92810 New

Jones Chromatography Column HPLC block heater The column block heater of the brand Jones is ideal f (more)or temperature control of columns used in liquid chromatography systems. This makes preheating of the liquid flowing in a liquid chromatography column possible. Temperature control of the column and of the liquid flowing in the column contributes to producing consistent and reliable results. Technical specifications Voltage: 220-240V, 50/60Hz Power: 300W Temperature range: up to 100 °C External dimensions (W) x (D) x (H): 38 x 13 x 14 cm Internal dimensions (W) x (D) x (H): 36 x 5 x 2.5 cm Unit powers up as shown in pictures. Equipment not tested

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The pictures are sample images. Manufacturer: Cohesive Technologies Model: TurboFlow HTLC WAX 0.5 x  (more)50 mm P/N: 952811 Specification:Compound      Time Symmetry Width1. Acetone       0,985 0,705  0,2122. Butyl Paraben     1,807 0,770  0,695Reduced plate height (acetone) = 6,4 Item delivered:- 1 x TurboFlow HTLC WAX 0.5 x 50 mm Conditionen:The column is in new condition.

Moisture analyzer Radwag MA 50.R. Max weight 50 g. Readability 1 mg. Plate size 90 mm. Fast and unif (more)orm heating with infrared. Drying temperature up to 160 ºC with four standard measurement profiles, fast, stepped, smooth. High repeatability +/- 0.05% (~ 2g sample), +/- 0.01% (~ 10g sample). RS232, USB type A, USB type B and Wi-Fi interface. Suitable for measurements in solids and liquids. Exportable data to Excel or Word.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-05273 Honda GX160 compressor motorITEM-03947 Crestron ST-COM Two Port RS-232/422 Expansion Module ITEM-10656 17x Multi-Type Centrifuge Rotor Buckets ITEM-13026 Eppendorf 5415 Centrifuge Rotor Lab Equipment ITEM-41098 5 x Tube RacksITEM-41099 Microscope Parts/StagesITEM-41100 Fume ExtractorITEM-40046 Olympus objectives x 2 (damaged)ITEM-41101 Grant GD100 Water Bath ITEM-41102 Grant GD100 Water Bath ITEM-41103 Grant SUB Aqua Pro Water Bath ITEM-40053 Warner Model TC-324B Automatic Temperature Controller ITEM-40054 BURLEIGH PCS-5000 SERIES MICROMANIPULATOR ITEM-40057 PCO.Imaging SensiCam, 12bit Cooled CCD CameraITEM-41114 Fisherbrand FB55147 ITEM-41115 Brand UV CuvettesITEM-41116 2 Cell Changer ITEM-41117 2 x SUB Aqua 5 Plus Water Baths ITEM-41118 Leitz Laborlux 11 Microscope ITEM-05775 A & D HR-120 Digital Laboratory Precision Balance Scales ITEM-41120 Brady TLS 2200ITEM-41121 Isopad Isomantle ITEM-41119 Perkin Elmer Gemini Hydraulic Press ITEM-10742 Kobold OVZ-30-II Oval Gear Flowmeter With Red Lion Digital Meter ITEM-40073 HP Hub ITEM-40075 STUART UC151ITEM-40051 kikusui PAB 350 ITEM-39935 EPPENDORF CENTRIFUGE 5415 R ITEM-39936 Trust Power Supply ITEM-39940 Trust Power Supply ITEM-41143 Impax-140ITEM-41144 impax im-mma140ITEM-40995 Water PumpITEM-40996 Quantachrome Manuals/Glassware ITEM-40997 Water Pump ITEM-26001 Draper BD13/5 Bench Drill Press ITEM-41000 Grant Water Bath ITEM-41001 Parr Pressure Reactor ITEM-41002 Buchi Waterbath B-481

Memmert HPP2200eco Climate Chamber 2140L, 115V Setting Temperature Range (without light, with humidi (more)ty) +5 to +70°C Setting Range Humidity 10 to 90 % rh Chamber Volume 2140 L (75.6 cu. ft.) Features - Spacious 2140 L (75.6 cu. ft.) capacity for ample storage and incubation - Temperature range from +15 to +60 °C with humidity, or 0 to +70 °C without humidity - Precise 0.1 °C temperature control accuracy with dual Pt100 sensors - Humidity adjustable from 10% to 80% RH with external distilled water supply - TwinDISPLAY with PID microprocessor control and high-definition TFT screens - Programmable via AtmoCONTROL software with USB and Ethernet connectivity - AutoSAFETY protection with visual and acoustic alarms for temperature regulation - Stainless steel door with inner glass panes and 2-point compression locking system The Memmert HPP2200eco Climate Chamber 2140L, 115V offers exceptional capacity and control for rigorous storage, incubation, and environmental testing needs. With a spacious 2140-liter interior, this chamber provides a temperature range from +15 to +60 °C with humidity and 0 to +70 °C without humidity, giving precise control over varied storage environments. Dual Pt100 temperature sensors ensure accuracy within 0.1 °C, while humidity control ranges from 10% to 80% RH, supported by an external distilled water supply system and advanced humidification and dehumidification features. Engineered for easy management, the HPP2200eco features Memmert’s TwinDISPLAY with a PID microprocessor and vibrant TFT displays, delivering real-time data at a glance. Program settings via the AtmoCONTROL software over USB or Ethernet for versatile operation, and enjoy peace of mind with Memmert’s AutoSAFETY system, which provides visual and acoustic alarms for over- and undertemperature protection. Built with a durable stainless steel door with inner glass panes and a secure 2-point compression locking system, this chamber meets the high standards required for lab precision and safety. INCLUDED: TheMemmert HPP2200eco Climate Chamber 2140L, 115V includes: - 6 Stainless Steel Grid - Tilt Protection Wall Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The anti-draft chamber is an optional accessory intended for XA 4Y and XA 5Y balances working in unf (more)avourable conditions (air-drafts). It is mounted on a table, inside the balance is placed. The chamber features sliding side panes allowing free access to the weighing chamber of the balance. CAUTION: The anti-draft chamber is to be used in a set with a granite anti-vibration table exclusively. It cannot be used with the anti-vibration table intended for laboratory balances.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).