Flow cell, 10 mm, 14 µL for Agilent UV Detector G1314 (G1314-60086)

This was removed from a university lab where it was surplus to requirements. The lab informed us tha (more)t it was in use until December 2022 and was fully serviced by Waters up to Feb 2023. All modules are in excellent cosmetic condition with only minor marks from use. Included are; 1 x Waters Sampler ManagerPart Number: 186016007S/N: J10NPS 788M The unit powers up but we were unable to test it further at our facility. This unit does include 2x part number 418000179 vile trays.  1 x Waters Binary Solvent ManagerPart Number: 186016002S/N: H10NPB 923NThe unit powers up, the flow light flashes red, green, and then turns off. We were unable to test it further at our facility. 1 x Waters Auxiliary Solvent ManagerPart Number: 186016021S/N: H10NPA 505NThe unit powers up but the flow light does the same as the binary manager. We were unable to test it further at our facility. There is also a network switch on the top of the stack. It is untested. It comes with 5x sealed bagged "nano inlet filter 5 micron", part number: 289002172 with dates on the bags ranging from 2011 to 2020. A set of bagged tubes that are labelled as "solvent aux".

For sale: WATERS APCI Probe PN.: 725000214

Thermo Dionex ASRS 300 2 mm Self-Regenerating Suppressor Dionex reference: 064555 Year of manufactur (more)e: 2012

Prior Model. PX042 Compound Trinocular Microscope With Four Objectives Lab This item was removed fro (more)m a university where it was surplus to requirement. It is in good cosmetic condition and in full working order. This microscope features: Four-position turret with the following objectives fitted: E Plan 4 x / 0.10 -0.17E Plan 10 x Ph / 0.25 -0.17E Plan 40 x Ph / 0.65 -0.17E Plan 100 x Ph / 1.25 oil -0.17 Eyepieces: 2 x WF 10x/22

BARNSTEAD Thermolyne 1300 Muffle Furnace FB1310M-33 Model: FB1310M-33 Capacity: 1.3 litres Working t (more)emperature limit: 1100ºC Continuous operating temperature: 982ºC Table top muffle Heating volume: 100 X 95 X 110mm External dimensions: 200 X 335 X 220 mm 1050 watts / 220V Environmental operating conditions: 17 to 27ºC, humidity less than 80% non-condensing Average cosmetic condition, numerous traces of rust

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

IKA Nanostar 7.5 Digital Overhead Stirrer Stirring quantity max. (H2O) 5 L Speed Range 0/50 - 2000 (more) rpm Viscosity max. 4000 mPas Features - Compact and lightweight design, weighing just 0.8 kg for easy handling and space-saving in the laboratory. - Constant torque throughout the speed range (50 - 2000 rpm), ensuring consistent performance for various applications. - Brushless DC motor with efficient operation and minimal maintenance requirements. - User-friendly operation via a stable rotary knob with an LED display for clear speed indication. - Includes a USB interface for convenient software updates, enhancing functionality over time. The IKA Nanostar 7.5 Digital Overhead Stirrer combines compact design with powerful performance, ideal for laboratories where space efficiency is crucial. Weighing just 0.8 kg and 30% smaller than its predecessor, the Nanostar 7.5 maintains high torque and precise stirring capabilities across its speed range from 50 to 2000 rpm. Featuring a brushless DC motor, it offers reliable operation and minimal maintenance. User-friendly controls via a rotary knob and LED display ensure ease of operation, while a robust housing ensures durability. With a USB interface for quick software updates, the Nanostar 7.5 is designed to meet the evolving needs of modern laboratory environments. INCLUDED: The IKA Nanostar 7.5 Digital Overhead Stirrer includes: - NANOSTAR 7.5 digital - R 300 shaft protector - Fasten screws for R 300 (2x) - chuck key - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Nanostar 7.5 Digital Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)5 l Motor rating input32 WMotor rating output22 WMotor principleBrushless DCSpeed displayLEDSpeed range0/50 - 2000 rpmViscosity max.4000 mPasOutput max. at stirring shaft15.7 WPermissible ON time 100 %Torque max. at stirring shaft 7.5 NcmSpeed controlTurning knobSetting accuracy speed1 ±rpmDeviation of speed measurement n 300rpm1 ±%Deviation of speed measurement n < 300rpm3 ±rpmStirring element fasteningchuckChuck range diameter0.5 - 8.2 mmHollow shaft, inner diameter8.5 mmHollow shaft (push-through - when stopped)yesFastening on standextension armExtension arm diameter13 mmExtension arm length160 mmNominal torque0.075 NmTimer displaynoneHousing materialalu-cast coating / thermoplastic polymerDimensions (W x H x D)53 x 147 x 130 mmWeight0.8 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 54USB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input32 WPower input standby0.3 WDC Voltage24 VCurrent consumption1300 mARequest a Formal Quote