Seaward Stomacher Model: 80 Biomaster Laboratory Blender System Lab

Atas GL Focus Robotic Sample Processor System This system was removed from a university where it was (more) surplus to requirement. All units are in good cosmetic condition and powered on, we are unable to test further at our facility. The system comprises: 1x ThermoQuest Finnigan Polaris turbo pump controller 1x GCQ Gas chromatographSerial#: 950208 1x GCQ Mass SpectrometerSerial#: 200065

Agilent Technologies 6850 Network GC System with Atas Programmable Injector This system was removed  (more)from a university lab where it was surplus to requirements. The system is in fair cosmetic condition and powers on. However, no further testing was conducted as there is no PC or software available to operate the units. The previous owner reported no known faults but noted that the system has been out of use for several years and would likely need recommissioning. Specifications: - Agilent Technologies 6850 Network GC System - Serial No.: 6850-CN10750008 - Atas Programmable Injector - Serial No.: 36083

This was removed form a unuiversity lab where it was surplus to requirements. The unit did not power (more) up in testing. We are advised it has a board fault. It is sold for spares/repairs.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Gas chromatograph Hewlett Packard 6890 Series. Detectors mounted FID and ECD. Injection system "spli (more)t/splitless". Suitable for the detection of cannabinoids, terpenes, pesticides, solvents, aromatic components, among others. Detection times are very stable. Software ChemStation or Clarity to comply with CFR21 Part 11 (+ € 1,500), required for IQ / OQ. PC. Includes user manuals. Agilent Technologies - 6890 opt. 211 Flame Ionization Detector (FID) Manual (click here)

Luminex 200 Multiplex Assy System with Luminex SD & XYP This was removed from a university lab w (more)here it was surplus to requirements. The unit powers up but we were unable to test it further at our facility. It is in good cosmetic condition with marks from use. Included are; Luminex 200Model: 200Serial#: LX10007082403 Luminex XYPModel: XYPSerial#: LXY07085103

IKA Ministar 80 Digital Overhead Stirrer Stirring Quantity Max 50 Liters Speed Range 0/50 - 500 rp (more)m Viscosity Max. 60000 mPas Features - The IKA Ministar 80 Digital Overhead Stirrer boasts a compact design, ensuring space efficiency without compromising performance. - With constant torque across its rpm range, the IKA MICROSTAR and MINISTAR series offer reliable stirring for various lab needs. - Operating the stirrers is a breeze, thanks to a stable rotary knob and a clear display showing the rotational speed. - Rapid and simple software updates are facilitated through the USB interface, ensuring the devices stay up-to-date effortlessly. - The IKA MICROSTAR and MINISTAR stirrers prioritize essential features, making them dependable companions in the lab. - Available in six versions with rpm up to 2,000 and torque up to 80 Ncm, these stirrers excel in both performance and compactness. The space-saving high performers from IKA MICROSTAR and MINISTAR series have been complemented by additional models. The new and easy-to-use stirrers convince with perfect basic functionalities, as well as with a compact design. Combining high performance with particular excellence, they require minimum space and come with a lifetime guarantee. See for yourself:Compact design - The reduced design and the focus on the most essential aspects make the new IKA MICROSTAR and MINISTAR stirrers reliable laboratory companions. Constant torque - All models of the IKA MICROSTAR and MINISTAR series guarantee a constant torque over the entire rpm range. The new devices are available in six different versions with rpms of up to 2,000 rpm and a torque of up to 80 Ncm. Ease of operation - Operation takes place using a stable rotary knob. The display clearly shows the rotational speed. Rapid updates - Regular software updates can be undertaken rapidly and simply via the USB interface. Click Here to View Product Video INCLUDED: The IKA Ministar 80 Digital Overhead Stirrer includes: - MINISTAR 80 digital - R 300 shaft protector - Fasten screws for R 300 (2x) - chuck key - USB Cable - USB A to Micro-B, 2 m - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 8 Year Warranty Extension with IKA Registration) IKA Ministar 80 Digital Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)50 lMotor rating input60 WMotor rating output46 WMotor principleBrushless DCSpeed displayLEDSpeed range0/50 - 500 rpmViscosity max.60000 mPasOutput max. at stirring shaft42 WPermissible ON time100 %Torque max. at stirring shaft80 NcmSpeed controlTurning knob Setting accuracy speed1 ±rpm Deviation of speed measurement n 300rpm1 ±%Deviation of speed measurement n < 300rpm3 ±rpmStirring element fasteningchuckChuck range diameter0.5 - 8.2 mmHollow shaft, inner diameter8.5 mmHollow shaft (push-through - when stopped)yesFastening on standextension armExtension arm diameter13 mmExtension arm length160 mmNominal torque0.8 NmTimer displaynoneHousing materialalu-cast coating / thermoplastic polymerDimensions (W x H x D)70 x 193 x 147 mmWeight1.72 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 54USB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input69 WPower input standby0.5 WDC Voltage24 VCurrent consumption2900 mAComparison of ModelsSpecificationsMinistar 20 ControlMinistar 20 DigitalMinistar 40 ControlMinistar 40 DigitalMinistar 80 ControlMinistar 80 DigitalStirring Quantity Max. (H2O)15 l15 l25 l25 l50 l50 lMotor Rating Input60 W60 W60 W60 W60 W60 WSpeed DisplayLCDLEDLCDLEDLCDLEDSpeed Range0/50 - 2000 rpm0/50 - 2000 rpm0/30 - 1000 rpm0/50 - 1000 rpm0/30 - 500 rpm0/50 - 500 rpmViscosity Max.10000 mPas10000 mPas30000 mPas30000 mPas60000 mPas60000 mPasTimer DisplayLCDNoneLCDNoneLCDNoneTemperature DisplayYesNoYesNoYesNoDimensions (W x H x D)70 x 193 x 154 mm70 x 193 x 147 mm70 x 193 x 154 mm70 x 193 x 147 mm70 x 193 x 154 mm70 x 193 x 147 mmUSB InterfaceYesYesYesYesYesYesVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(7) { background-color: #fffacd; } Request a Formal Quote

Polyscience LS51M11A110C LS5 Benchtop Chiller with Centrifugal Pump, 120V, 60Hz3D Visualization of t (more)he Polyscience Benchtop ChillerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. The LS-Series Compact Chiller provides cooling power for demanding applications and serves as an economical alternative to tap water cooling systems. It features a microprocessor-based controller, digital temperature display (C or °F), and simple operation and maintenance. To optimize cooling efficiency and performance, this sophisticated Chiller also features a modulated refrigeration system. As a result, temperature stability is greatly enhanced and compressor life extended. The Chiller is equipped with either a magnetic drive centrifugal pump or a turbine pump. Wetted parts within the recirculation system are brass, copper, stainless steel, EPDM rubber, Alcryn, nylon, PVC, and polyethylene. Features Optimized for high performance at low temperatures Capable of cooling multiple rotary evaporators WhisperCool® Environmental Control System Large, easy to read LED display Space-saving design Cooling at ambient temperatures as high as 35C Low flow shutoff and alarm, high and low temperature alarms Simple setup, operation, and maintenance Centrifugal or turbine pump Fluid level indicator RS232 communication and external water filter optional INCLUDED: The Polyscience LS51M11A110C LS5 Benchtop Chiller , -20°C to 40°C, 1160W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Frame intended for 4-load-cell powder-coated scales C7, that are to be embedded in the ground.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

VWR CompactStar CS4 Benchtop Centrifuge In excellent working condition Part number: Compact Star CS4 (more) Technical specifications: Voltage: 230V Frequency: 50 - 60 Hz Speed: 0 - 6500 rpm Dimensions (H x W x D): 230 x 210 x 190 mm Weight: approx. 23 kg max. rcf: 4000×g Timer: 0.5 to 30 minutes or continuous Weight: 4.75kg With fixed angle rotor Max. capacity: ×15 ml conical / 6×15 ml standard / 6×10 ml blood tube Year of manufacture: 2010