HP 5890 GC-FID

Manufacturer: Environics-IUT Model: ENVI-Air GC-IMS-Analyzer S/N: IM0911.120011 YoM: 2012 Descripti (more)on: The ENVI-Air from Environics is a continuously operating gas analyzer designed for ultra-low level detection of either single or multi-component hazardous gases in ambient air. It will operate indoor or outdoor in the harshest environmental conditions and needs little or no maintenance. The ENVI-Air can detect hazardous gases at far lower concentrations than traditional analyzers and react in real-time. This gives the operator a longer safe response window to take corrective action.It is based on GC-IMS technology. Ion Mobility Spectrometry (IMS) is a simplified atmospheric pressure time-of-flight technique that is highly selective with low ppb to % sensitivity. The GC-IMS adds multi-component separation prior to the IMS analysis. ENVI-Air does not require the use of paper tape, pre-concentrators or chemical reagents.The ENVI-Air is an industrial solution virtually drift free and unaffected by humidity or temperature changes and will be factory calibrated for the compounds of interest for maximum accuracy and reliability. Because of the simplicity of design and limited moving parts, ENVI-Air analyzers will have the lowest maintenance and downtime of any current analyzer system. Measurable Compounds: Ammonia, Acetone, Acrylonitrile, Acetonitrile, Arsine, Benzylchlorid, Bromine, Chlorine, Chlorocyane, BTX, CMME, Ethylene Oxide, Dibutylphthalat (DMP), Dimethylsulfat, HFPO, Hydrazin, Hydrogen Chloride, Hydrogen Bromide, Hydrogen Fluoride, Hydrogen sulfid, TDI, Methyl Bromide, Isopropyl alcohol, Methyl Iodide, Nitrogen dioxide, NMP, PFIB, Phosgene, Phosphine, PGME, PGMEA, Sulfur Dioxide, Triethylamine, Vinyl Chloride. Areas of application: - Oil and Gas Production- Plastics Manufacturing- Semiconductor Fabrication- Chemical Production- Pharmaceutical Manufacturing- Gas Pipeline Safety- Medical Sterilization- Primary Metal Processing Specifications: - Detection Principle: Gas Chromatography - Ion Mobility Spectrometry (IMS)- Ionization: Tritium (3H) No Licence or Wipe Tests Required- Sensitivity: Low ppb range- Moisture: 0% to 90% RH- Warm Up Time: 20 minutes- Measurement Time: Seconds- Power: 220 VAC/19VDC - Carrier Gas: No Carrier Gas Required- Operation Temperature: -10°C to +50°C- Storage Temperature: -40ºC to +50ºC - Enclosure: 19” Rack Mount- Power: 220 VAC/19VDC - Dimensions (L x W x H): 483 x 381 x 89 mm - Weight: 6.44 kg Items delivered: - Environics-IUT ENVI-Air GC-IMS-Analyzer- Instruction manual Condition: The item is in perfect coasmetic as well as operarting condition. It is 100% functional teasted and ready to be used.

Interscience GC 8000 TOP

Hewlett-Packard/Agilent 5890 Series II GC with FID, Split/Splitless Injector and 7673B Autosampler w (more)ith 100 sample tray, tower and controller. PC with preinstalled  ChemStation software. All necessary power cords and cables. User manual. The Hewlett Packard 5890 defined the absolute standard of gas chromatography for many laboratories around the world. A refurbished 5890 might be the answer to your needs to lower budgets and obtain high quality analyses.

The Bruker LUMOS is a fully automated stand-alone FTIR microscope with an 8x objective and can be us (more)ed in transmission, reflection and ATR mode. The measurement results in a single file including visible images, spectral data and sample information. For evaluation and visualization of the microscopic data the software provides powerful and intuitive Chemical Imaging functionality. The LUMOS is a stand-alone FT-IR microscope with an integrated FT-IR spectrometer perfectly matched into its optical design. All components are motorized and electronically coded. The innovation of a motorized ATR-crystal allows the system to switch from transmission or reflection to ATR mode without interaction of the operator, and to measure fully automated sample and background spectra even in ATR mode. The heart of each FT-IR spectrometer is the interferometer. The LUMOS uses a patented, permanently aligned RockSolid interferometer being extremely insensitive against mirror tilts, vibrations and thermal effects. 8x objective for automated measurements in transmission, reflection and ATR Magnification can be increased to 32x by digital zooming Image capture by highly resolving digital CCD camera Motorized Germanium ATR crystal with internal pressure control Motorized sample stage Motorized z-drive All IR-transparent windows and the IR beam splitter are made of ZnSe providing robustness even against high humidity High sensitive photoconductive MCT detector Including PC with software

Thermo Scientific MAXQ 5000 SHKE5000-1CE (4351) Shaking Incubator This was removed from a universit (more)y lab where it was surplus to requirements. The system is faulty and requires a new controller. It is in otherwise good cosmetic condition with minor marks. It is sold for spares/repairs.

Julabo DYNEO DD-300F Refrigerated Circulator with Analog Output, 115V/60Hz Refrigerant R134a Workin (more)g Temperature Range -25°C - 200°C Cooling Capacity 300W at 20°C Features - Powerful cooling machines - Suitable for internal and external applications - Optimized cooling coil design saves space in the bath tank - Powerful and infinitely adjustable pressure pump - Flow rate 27 l/min, pressure 8.7 psi - Easy switching between internal and external circulation - Large color TFT display, multilingual interface - Central rotary knob (controller) simplifies operation - Integrated programmer for 8 x 60 program steps - Integrated external Pt100 connection - USB port - RS232 interface or analog interfaces (optional) - Bath cover included with delivery - Integrated drain makes emptying liquid easy and safe DYNEO™ refrigerated/heating circulators are suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. Refrigeration combinations afford low temperature capabilities from -20 °C to -50 °C with an upper temperature limit of 200 °C. The DYNEO™ DD circulator incorporates easy change-over for control of fluid circulation internally or externally. Unit fittings M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. A color TFT display with central rotary knob controller includes a multi-lingual interface, integrated programmer, Pt100 port for external temperature control, USB connection for external PC control and data-logging with digital options including RS232 port or an analog module interface for voltage or current control. PID temperature control provides ±0.01 °C stability. Infinitely variable centrifugal pump capacity of 8-27 L/min with pressure to 1.5-10.2 psi. Stainless steel bath tanks with integrated drain port. Class III (FL) according to DIN 12876-1.INCLUDED: The Julabo DYNEO DD-300F Refrigerated Circulator with Analog Output, 115V/60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Accuris myGel Mini Electrophoresis System The myGel mini gel box attaches directly to the power supp (more)ly for a secure connection everytime. Selectable parameters include 3 preset voltages – 35V, 50V or 100V – and a 99 minute timer. All are set using the memberane keypad. The safety lid is vented to help dissipate heat generated during electrophoresis, and features a viewing area above the gel. Current will only run through the system when the lid is properly in place on top of the gel box. Trays and casting stands for both 10.5 x 6cm and 5 x 6cm gels are included with the myGel Mini system, as are double-sided combs. The smaller tooth combs are compatible with multichannel pipettes. Casting is quick and easy – just place the tray in the casting stand and pour. The trays feature a dark contrast strip to help visualize wells while loading and lines that fluoresce under UV and blue light to track progress of the run.INCLUDED: The Accuris myGel Mini Electrophoresis System includes: - Gel Tank - Power Supply - Two Casting Sets for 10.5 x 6cm and 5 x 6cm - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty