Hewlett Packard HP 6890 Series GC System Gas Chromatograph Lab

VOGTLIN GCM Red-y Compact Mass Flow Meter Model: Vögtlin GCM-C3EA-BN00 Medium: Air/air Measuring ran (more)ge: 0.2-10 Measuring unit: ln/min Accuracy : ±2.0 % end value (range to 200 ln/min) Temperature: 20 °C Pressure inlet: 2 bar a Connection: G1/4″ Inside thread Body material: Aluminum Seals: FKM Power supply: Battery Calibration protocol: with Ref. Pressure : 1013 [mBar] Ref. Temperature : 0 [°C]

Finnigan MAT GCQ Mass Spectrometer Gas Chromograph GC-MS System This was removed from a university l (more)ab where it was surplus to requirements. The Mass Spectrometer powered on with the cooling fan operating and lights illuminating on the front panel. It is in good cosmetic condition with minor marks from use. Finnigan MAT GCQ Mass SpectrometerSerial No. 200295

Hewlett Packard HP 6890 GC Gas Chromatograph And Injector This item was removed from a university wh (more)ere it was surplus to requirement. The Hewlett Packard HP 6890 is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility. The lab confirmed the system was in good working order prior to removal.

Zeta Programable Guillotine Cutter GCI-800 This item was removed from a university where it was surp (more)lus to requirement. It is brand new in its original packaging. The Item powers on and performs as intended. All items included: 1x Zeta Programable Guillotine Cutter GCI-800S/N: GC1800-190601 1x Set of Allen keys. 1x Philips screwdriver 1x Lubricating oil. 1x User manual.

Interscience GC 8000 TOP

This Heto Cellhouse 170 HI Model 170-300 CO2 Laboratory Incubator was removed from a university (more) lab where it was surplus to requirements. The unit has been fully tested and recertified by a service engineer. We have a copy of the report available if needed. It is fully working but the O2 sensor is out of date (user replaceable). 2 Shelves - 52 x 49cm It is in good cosmetic condition but has some minor marks from use

Yamato WH-501P Auto Pure High Purity Di Type 2 & Type 3 Water Purification System, 120V Maximum  (more)Flow Rate 1.25 gpm / 4.7L/min Pressure Range 10 to 100 psi Temperature Range 40F to 100F Features - Turn-key system for low cost – on demand service - Resistivity light included for visual indication of cartridge replacement - Available in high purity and high capacity configurations - Available in 2-1/2″ and 4/1/2″ diameter configurations - Outlet isolation valve, spanner wrench and associated tubing provided - Economically produces DI water A pre-assembled cartridge system that provides deionized water using a staged filtration process. Water purification is provided using a three-stage process. High Purity DI System- 4-1/2" Diameter (10" Carbon, (2) 20" Mixed Bed, & 200 K DI Light). Type 2 and 3 water quality. INCLUDED: The Yamato WH-501P Auto Pure High Purity Di Type 2 & Type 3 Water Purification System, 120V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

VACUUBRAND VACUU-PURE 10 Screw Pump Ultimate Vacuum 0.005 mbar (0.0038 Torr) Maximum Pumping Speed  (more)5.9 CFM Inlet/Outlet Connection Small Flange KF DN 25 Features - 10-3 mbar vacuum range - 100% oil-free - No abrasion - No wear parts The dry screw pump VACUU-PURE 10 reliably delivers the benefits of oil-free vacuum technology in the pressure range down to 10-3 mbar. VACUU-PURE 10 combines three important benefits for the user: 100% oil-free, no abrasion, and no wear parts. VACUU-PURE 10 is ideal for clean processes which require a dry and hydrocarbon-free vacuum. The spindles of the screw pump run contact-free and are thus free of abrasion and wear. The screw pump is especially designed for processes in the vacuum range down to 10-3 mbar, however unlike other fine vacuum technologies it can be used across the entire pressure range from atmospheric pressure to its ultimate vacuum. The evacuation of even larger systems from atmospheric pressure down to the 10-3 mbar vacuum range can be done without changing the vacuum pump. VACUU·PURE easily handles high levels of vapor accumulation through its extraordinary condensate compatibility. Thanks to this capability, a gas ballast is unnecessary, avoiding associated disadvantages like the reduction in pumping speed and an increase in noise levels. The integrated regeneration mode enables rapid drying of the pump at the end of the process. This allows sample throughput to be increased significantly as compared to other pump technologies. INCLUDED: The VACUUBRAND VACUU-PURE 10 Screw Pump includes: - 2 x Centering Rings - 2 x Clamping Rings - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Wall-mounting kit has been designed to facilitate installation of PUE 7.1 and PUE C32 terminals on a (more) vertical surface. The kit can be mounted in two positions. Intended use: Easy installation of PUE 7.1 terminal on a vertical surface; Easy installation of PUE C32 terminal on a vertical surface; Mounting the PUE 7.1 terminal to a wall at the angle of 80°; Mounting the PUE C32 terminal to a wall at the angle of 80°; Mounting the PUE 7.1 terminal to a wall at the angle of 55°; Mounting the PUE C32 terminal to a wall at the angle of 55°. Design: The PUE-7-32 wall-mounting kit is manufactured of 1 mm steel, which provides sufficient rigidity. The kit is offered in powder coated mild steel version in colour corresponding to the colour of PUE 7.1 / PUE C32 housing. Multiple technological holes, make it possible to mount the kit in 8 points (4 mounting points for the PUE 7.1 / PUE C32 terminal and 4 mounting points for fixing to a vertical surface).

IKA R 3000.1 Moebius stirrer Maximum Speed ≤ 800 RPM Flow Type Axial Flow Material Stainless Steel F (more)eatures - Generates axial flow, drawing material from above for effective mixing - Ideal for circulating and handling low to medium viscous liquids - Made of AISI 316L / 1.4571 stainless steel for durability and resistance - Designed to work within an ambient temperature range of 5 - 40 °C - Operates at medium speeds with a maximum of ≤ 800 rpm The R 3000.1 Moebius stirrer is engineered to generate axial flow, skillfully drawing materials from above to ensure thorough mixing and circulation of low to medium viscous liquids. With a 100 mm diameter and a 565 mm shaft, it's perfectly suited for a variety of laboratory applications, operating effectively at medium speeds up to 800 rpm. Constructed from high-quality AISI 316L / 1.4571 stainless steel, it combines resilience with corrosion resistance. Weighing 0.592 kg and designed to function within a 5 - 40 °C ambient temperature range, this stirrer balances performance with durability for reliable everyday use.INCLUDED: The IKA R 3000.1 Moebius stirrer includes: - IKA R 3000.1 Moebius stirrer - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW