GE AKTA Purifier 10 FPLC System - P-900, UPC-900, Box-900, M-925, PV-908,INV-907

Amersham Biosciences AKTA FPLC System This was removed from a university lab where it was surplus t (more)o requirements. The unit powers up and has been serviced, but failed the service. It is sold for spares/repairs. Included are; 1x Amersham Biosciences AKTA FPLC System UPC-900 P-920C/N: 18-1118-67System/N: 01098245 1x UPC-900C/N: 18-1128-95S/N: 01099325 1x P-920C/N: 18-1164-68S/N: 01099849

Amersham Biosciences AKTA Prime FPLC System This system was removed from a university laboratory whe (more)re it was surplus to requirements. The unit powers on and is in fair cosmetic condition.However, after the calibration period, it produces the following error code: "86 WARNING cond_cell bad/not connected." Tubing has been removed for photographic purposes.

Pharmacia LKB FPLC System This was removed from a university lab where it was surplus to requiremen (more)ts. The system powers up and is in good cosmetic condition Included are; 1x Controller LCC-500 PlusS/N: X D 00197 1x Fraction Collector Frac-100S/N: 56100982 F3 005939 1x Pump P-500S/N: 56102694 E5 012109 1x Single Path Monitor UV-1 Optical UnitS/N: 226622 1x Single Path Monitor UV-1 Control UnitS/N: 221274 1x Whatman Filter paper pack of 1002x Filter Kit 280m2x bag of adapters6x thermal paper

Amersham Biosciences AKTA FPLC System UPC-900 P-920 INV-907 M-925 Frac-950 This was removed from a u (more)niversity lab where it was surplus to requirements. The unit has been professionally serviced and is in full working order. It will require an interface box to connect it to a PC. It is in good cosmetic condition with minor marks from use. Included are; P-920 -Serial number- 01155727Code number- 18-1164-68 AKTA FPLCserial number- 01160429Code number- 18-6083-20 UPC-900Serial number- 01159938Code number- 18-1128-95 INV-907Serial number- 01158917Code number- 18-1108-40 M-925Serial number- 01160502Code number- 18-1118-89

This item has just arrived in our stock. Please enquire for further details.

This item has just arrived in our stock. Please enquire for further details.

This listing is for a IKA Eurostar PWR CV Overhead Stirrer.The unit is in full working condition and (more) is ready for immediate release.The IKA Eurostar PWR CV Overhead Stirrer is an efficient laboratory device specifically designed for various stirring tasks, excelling in mixing both high and low viscosity substances. This stirrer is part of the comprehensive IKA Eurostar series, which offers diverse models tailored to different laboratory needs.Key Features:Speed Range:Features a versatile speed range of 0/30 - 2000 rpm, with automatic adjustments made possible through advanced microprocessor-controlled technology.Safety Circuits:Equipped with built-in safety circuits that provide automatic cut-off in cases of anti-stall or overload conditions, ensuring user safety and equipment protection.Constant Speed:Maintains a steady speed regardless of viscosity changes in the sample, as it continuously compares the actual shaft speed with the set speed for optimal performance.Stirring Quantity:The EuroStar 20 model can handle a maximum stirring quantity of 15 litres (H2O), making it suitable for larger volumes.Torque:Delivers a maximum torque of 20 Ncm at the stirring shaft, providing sufficient power for effective mixing.Stirring Element Fastening:The stirring element is securely fastened using a chuck, ensuring stability during operation.Applications:Laboratory Use: Designed specifically for laboratory environments, making it ideal for routine stirring tasks.Mixing Substances: Capable of efficiently mixing a wide range of substances, whether they are of high or low viscosity, catering to diverse experimental needs.Intensive Mixing: Suitable for applications that demand intensive mixing, such as preparing emulsions or suspensions.

Capacity: 96 tubes 0.2 ml, 96 well microplates Block: Silver Block coating: Gold Max Heating Rate: 6 (more).0°C/sec Max Cooling Rate: 4.0°C/sec Avg Heating Rate: 5.5°C/sec Avg Cooling Rate: 3.5°C/sec Temperature Uniformity at 95°C: ± 0.50°C after 15 s Temperature Uniformity at 70°C: ± 0.25 °C after 15 s Temperature Uniformity at 55°C: ± 0.15 °C after 15 s Gradient Temperature Range: 3°C to 99°C Temperature Range: 3°C to 99°C Control Accuracy: ± 0.1°C Lid Temperature Range: 30°C to 110°C Dimensions (WxDxH): 277 x 457 x 264 mm Weight: 15 kg

Twinbird Corporation SC-UE15R FPSC Module UE15 with Heat Absorption Ring This item was removed from  (more)a university lab where it was surplus to requirements. It is in good cosmetic condition but has not been powered on, as it requires wiring into a power supply. Specifications:- Model: SC-UE15R - Serial No.: 3 5Z16

Micromass Waters Q-TOF Premier Mass Spectrometer This system was removed from a university lab where (more) it was surplus to requirements. The spectrometer is in excellent cosmetic condition, though the right-hand side panel is missing. It powers on, but the PC repeatedly displays a "VxLd 1.2" message during boot-up and does not progress further. The previous owner reported a failed HV board. Due to the failed HV board, this system is listed as Spares/Repair. The system includes the following: - Micromass Waters Q-TOF Premier Mass Spectrometer - Serial No.: HAA009 - Enlight PC - Serial No.: ECDG0406050406 - Dell Monitor - Serial No.: CN-ODC323-71618-64A-GNPO - HP Keyboard - Model No.: KB-0316 - Serial No.: BATHA0KVBZK - 1 x Spare spray source assembly (Code No.: M951593CC1, Serial No.: 33/015) - 1 x Spare spray source assembly with Watec W85BC camera (Serial No.: 63623) - 1 x Spare outer stage assembly

RADWAG-manufactured AVK-1000 automatic vacuum mass comparator is intended for national metrological  (more)institutes that transfer and maintain the national reference mass standard of 1 kg. The comparator is intended for weighing mass standards and silicone spheres of 100 mm diameter. It enables comparison of up to 6 prototypes of max 1kg mass. The repeatability of the process is of 0.3 µg and readability of d = 0.1 µg. A specially designed vacuum chamber enables carrying out measurements in a vacuum of 10-6 mbar capacity or in atmosphere containing noble gases. AVK-1000 is equipped with suspended weighing pan that eliminates eccentricity errors. Standard version of the mass comparator features thermo-hygro-barometer for testing ambient conditions with great accuracy: pressure of 0.001hPa, humidity of 0.01% and temperature of 0.001 °C. The comparator is also equipped with high quality vacuum gauge. The AVK-1000 vacuum mass comparator can be equipped with the LOAD LOCK system for carrying mass standards. The system enables switching or adding artefacts without changing the atmosphere inside the main chamber. With the use of a special chamber for mass standards switching the whole process is 90% shorter. During mass standards replacement carried out without the use of the LOAD LOCK system, the air enters the main chamber of the mass comparator. After each opening of the chamber it is necessary to pump the air out in order to obtain required vacuum value. The vacuum mass comparator needs approx. 48 hours in order to obtain vacuum that ensures measurement repeatability. The LOAD LOCK is equipped with a high-efficiency pump system, the time of pumping the air out in order to enable opening of the valve of the main chamber is significantly shortened. The stabilization of the main chamber after replacing/adding the mass standard and closing the valve connecting the main chamber and the LOAD LOCK system takes 5 hours. The high-quality vacuum gauges enable monitoring and comparing the vacuum value in order to determine the moment when opening the valve again and replacing the mass standard is available. A specially designed viewfinder enables monitoring of the process. The LOAD LOCK enables switching objects of dimensions adapted to the AVK-1000 mass comparator: cylindrical mass standards of 22-95 mm diameter and silicone spheres of 40-100 mm diameter. Supplementing the AVK-1000 vacuum mass comparator with LOAD LOCK system significantly improves the comparison performance.