VWR Mini Star Silverline Centrifuge

Beckman Coulter Type 70 TI Centrifuge Rotor 70,000 RPM This item was removed from a university lab w (more)here it was surplus to requirement. It is in good cosmetic condition but has not been tested. Specifications: - Type: 70 Ti - Maximum RPM: 70,000 - Capacity: Holds 8 x 25ml tubes - Serial Number: 00E 2294

Hermle SIEVA-3-TC Filtration Centrifuge with external temperature control The SIEVA-3 Filtration Cen (more)trifuge is the perfect centrifuge for cake filtration. The powerful SIEVA-3 reaches speeds up to 10,000rpm/7,825 xg, and features a transparent viewing port in the lid for close monitoring of samples. The stainless steel housing and parts makes the SIEVA-3 corrosion resistant, and easy to clean. Optional 500ml filtration baskets are available in both perorated and non perforated. Clarified liquids exit the unit via the drain located on the side of the unit. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. INCLUDED: The Hermle SIEVA-3-TC Filtration Centrifuge with external temperature control includes: - Z600-500-P 500ml Centrifugal Basket, Perforated - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Manufacturer: Beckman Coulter Model: J-26S XP BioSafe Three-Phase Description: The J-26S X sets the  (more)standard for performance, including high speed, low heat dissipation, imbalance tolerance and low noise level, and its wide range of separation capabilities is extended even further, now including three-phase filtration that further separates airlock material into solids, liquids and gases. The addition of a High Efficiency Particle Arrestance (HEPA) filter set makes the unit bio-safe. The J-26S XP centrifuge features a more impact-resistant lid, full containment barrier and automatic rotor detection. The ergonomic design - with lower unit height and hands-free door operation - remains unchanged. The J-265 XP can process six liters of fermentor output in less than 10 minutes, deliver a subcellular fraction at 82,000 x g, and run 24 microplates simultaneously. The unit automatically detects which rotor is installed and prevents the rotor from exceeding its maximum speed. It enables faster, quieter and more energy-efficient operation with better temperature control. The exclusive, high-torque SR (Switched Reluctance) drive reduces cycle times. Core features: - Processing six liters of digester output in less than 10 minutes. - Deliver a subcellular fraction at 82,000 x g - Run 24 microplates at once - Separate live cell populations with elutriation - Sterile filters prevent the escape of infectious material Specifications: Maximum speed: 26,000 rpm Acceleration: Maximum, slow or timed (1-10 minutes, 0-500 rpm). Deceleration: Maximum, Slow, Timed (1-10 minutes from 500-0 rpm) or Off Maximum capacity volume range: 1 - 6 L Refrigeration system: CFC-free, non-ozone depleting refrigerant Temperature range(s): 10°C - 40°C in 1 degree increments Weight: 290kg Dimensions (W x H x D): 71cm x 86cm x 86cm Power requirements: 220/380 VAC, 50 Hz, 3 phases Humidity restrictions:< 95% (non-condensing) Scope of delivery: - J-26S XP BioSafe Three-Phase without rotor - Instruction manual as PDF via e-mail If you need a suitable rotor, we are happy to help! The unit is in absolute top condition and has been 100% function tested.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Capacity : 6 x 1.5/2.0 mL Max. Speed : 6000 rpm Max. rcf : 2000 xg Dimensions (WxDxH): 125 x 145 x 1 (more)15 mm Weight : 0,75 kg

Hamilton Microlab Star Liquid Handler Workstation This system was removed from a university lab wher (more)e it was surplus to requirements. The unit is in good cosmetic condition, with some screws missing from the outer panels and one side panel replaced with a shorter piece of plexiglass. Additionally, 2/5 legs are missing their rubber footpads. The system could not be tested further due to the absence of a PC w/ relevant control system. The previous client has stated it was in working order prior to removal. Included: - 5 x 24-Tube Holder Racks (Part No. 173400/02) - 3 x 5-Plate Holder Racks (Part No. 182090/02) - 1 x 5-Set Tip Carrier Rack (Part No. 182085/03) - 1 x Data Cable Specifications: - Model: Microlab Star - Serial No.: 1015 - Part No.: 173 009/80

IKA Dry Block Heater 4 Heating Temperature Range room temp. +5° - 120 °C Number of Blocks 4 Blocks S (more)et-up plate material Aluminium alloy Features - Digital block heater for four aluminum blocks, offering precise temperature control for small vessels - Includes PT-1000 temperature sensor for direct temperature control in the sample vessel - Compatible with PCR tubes, PCR strips, Greiner tubes, microplates, and cuvettes - Features a counter for displaying heating time and a large selection of blocks for versatility - Error code display and fixed safety circuit enhance reliability and safety - Acoustic signal indicates the end of a test for user convenience - Made from aluminum alloy with set-up plate dimensions of 96 x 304 mm Digital block heater for four aluminum blocks provides precise temperature control in small vessels. Included PT-1000 temperature sensor allows temperature control directly in the sample vessel. It is used with PCR tubes, PCR strips, Greiner tubes, microplates and cuvettes. The block heater is ideal for melting and boiling point determination, enzyme reactions, incubation and activation of cultures, immunoassays, DNA denaturation, culture media tests, coagulation tests, blood-urea-nitrogen determinations and in situ hybridizations.INCLUDED: The IKA Dry Block Heater 4 includes: - Dry Block Heater 4 - Block remove tool - PT 1000.60 Temperature sensor, stainless steel - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Old Interscience FID Trace GC without software

F2-class mass standards represent an impressive level of precision in mass measurement. Classified a (more)s metrology grade F2, they are recognized as top-quality tools suited for advanced applications where precision is a key element. F2 mass standard: stainless steel wire Nominal value: 5 mg Material: stainless steel Exceptional Measurement Precision F2 class mass standards feature excellent measurement precision achieved through stringent standards for allowable deviation from actual weight. Stability under Dynamic Conditions An important feature of F2-class mass standards is their ability to maintain measurement stability even under dynamic measurement conditions. They are designed to cope with a variety of factors that affect measurement precision. Calibration at the Highest Level The calibration process of F2-class mass standards adheres to the most stringent norms and standards. This makes the standards of this class recognized as tools with the highest degree of accuracy, complying with international requirements. Use of Materials with Outstanding Properties F2 class mass standards are often constructed from materials with outstanding physical properties. This ensures not only excellent precision, but also exceptional durability. Application 1. Scientific Research at the Highest Level In scientific research, especially in fields that require the utmost precision, such as nuclear physics or astrophysics, F2 class mass standards are indispensable. 2. Metrology Industry In metrology laboratories engaged in testing and maintaining the most advanced measurement standards, F2 class standards are indispensable working tools. 3. High-Precision Testing Laboratories In laboratories specializing in research requiring the highest precision, such as forensic laboratories and materials testing, F2 class mass standards are essential. 4. Aerospace Industry In the precision mass measurements required in the aerospace industry, F2 class standards provide reliability and excellence. F2 class mass standards are the symbol of the highest precision in the field of mass measurement. Their use is crucial in the most advanced fields of science, industry and research.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R &ndash; resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR &ndash; infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C &ndash; capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).